Jump to content
SAU Community

Recommended Posts

I've been saying that since the mid 90's and here we are lol.....

my new formula would be:

3.0 Litre DOHC 5 valve per cylinder max twin turbo V10.

Or upto 8 Litre naturally aspirated, any configuration.

Free aero, apart from front and rear wing wake and air disturbance massively reduced.

Full ground effects floor, tunnel and diffuser allowed.

No kers or any other device of this nature.

alcohol based fuel.

minimum two tyre manufacturers.

cockpit equalised so that no driver is held back by weight or size.

Larger tyres, much different profiles, probably 18"

If full ground effects were allowed back (sliding skirts, tunnes... etc) the cars would have tiny wings anyway, regardless of rules.

I think the old 1.5 turbo or 3.5 na is the way to go, but leave the piston count and layout free. The turbo tech that would come out of low capasity engines would be great

by the looks of the rule changes...i dont think i'll be watching after 2013 anyways. so they can all do what they like

good point. I figure if I up my alchol consumption by about 30% I will soon forget all the WDC results from 1985 to 2000 and I can then just re-warch those 15 years of F1 over and over again...

If full ground effects were allowed back (sliding skirts, tunnes... etc) the cars would have tiny wings anyway, regardless of rules.

I think the old 1.5 turbo or 3.5 na is the way to go, but leave the piston count and layout free. The turbo tech that would come out of low capasity engines would be great

yeah agreed. 3l turbo and 8L na is waaay too big. get them to make a max 1.5L turbo or 3L na as the maximums. they can easily get 800hp-1000hp from either 1.5L turbo or a 3L v10 NA so then they get to chose reliability (800hp) or power (1000hp). or spend more and have both!

if really generous up it to 2L turbo and 3.5L NA. that is plenty.

I like the idea of cockpit rules though and perhaps raise min weights so that fat drviers aren't penalised! lol. i'm sure there's some talented fatties out there... would surely help webber to be on an even keel weight wise with vettel. he is giving away probably half a tenth per lap in body weight penalty alone.

....actually the way Raikonnen is going on the tooth he might need an extra widebody F1 car if he makes a come back.

I wonder what mods they made to get Tony Stewart in the MP4-23 did they graft the A to B pillars from a BA Falcon with a seat located in the middle to fit him in? It would have left room for space to sit a pizza, a couple of burgers and cupholders for a big gulp.

I would love to see more taller/bigger drivers have a shot at F1 but realistically it is a sport for rich midgets.

I've been saying that since the mid 90's and here we are lol.....

my new formula would be:

3.0 Litre DOHC 5 valve per cylinder max twin turbo V10.

Or upto 8 Litre naturally aspirated, any configuration.

Free aero, apart from front and rear wing wake and air disturbance massively reduced.

Full ground effects floor, tunnel and diffuser allowed.

No kers or any other device of this nature.

alcohol based fuel.

minimum two tyre manufacturers.

cockpit equalised so that no driver is held back by weight or size.

Larger tyres, much different profiles, probably 18"

then i'd def be watching. :)

sadly.....very unlikely

I'd be happy to keep the current capacity, what is it 2.4L? They can make plenty of power from that capacity these days. But allow whatever configuration they want to run as far as how many cylinders etc, and have no rev limit.

It could give some more variety in the field, the way its going it will be a common pretty much everything ala V8 Supertaxi's in a few years.

No rev limit could potentially reward teams willing to push the limits of engine reliability if they can hold them together. I don't see the problem with that because they already get penalised for using too many engines anyway, so why not let them push the envelope of reliability?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...