Jump to content
SAU Community

Recommended Posts

does anyone know how to go about deleting the rear wiper?

speedhunters have been doing a feature on sedans and haulers and featured a few stageas this month - this one today looks ultra clean, and makes me want to delete the badges and wiper on mine, but i'm wanting to know if anyone knows of a bung kit to suit?

3.jpg

10.jpg

Link to comment
https://www.sau.com.au/forums/topic/345371-c34-rear-wiper-delete/
Share on other sites

I have those blanking caps on Yahoo auctions for sale before

Not hard to make your own. Once you remove the motor from the inside you will be left with a approx 15-20mm hole thru glass.

make a cap from something and glue it on.

I think that if you remove it you will get a defect, just like Silvia owners do if they remove the wing caus they remove the stop light part.

You would have to check each State's laws on rear wipers on wagons.

^^ I think the only issue with the removal of a wing with a stop light in it is the loss of the 'eye level' brake light that you are required by law to have.

Would be interested to know the legalities of removing a rear wiper

I have those blanking caps on Yahoo auctions for sale before

Not hard to make your own. Once you remove the motor from the inside you will be left with a approx 15-20mm hole thru glass.

make a cap from something and glue it on.

Yeah i have seen them on yahoo japan fairly often, I think it's just a rubber plug of some kind.

^^ I think the only issue with the removal of a wing with a stop light in it is the loss of the 'eye level' brake light that you are required by law to have.

Would be interested to know the legalities of removing a rear wiper

I have heard of people being defected in NSW for removing a rear wiper, if it was there from factory. Same for removing the rear washer nozzle thing.

Seems like something that would only be picked up if a cop was really intent on raping you though.

back1.jpg

funnily enough, i hate not having a back wiper when it's raining :P

there was a little rubber "nipple" on the back of mine covering the wiper bit... but it fell off so now its a bit of silicon!!

not sure what I can cover it with now.

yep, after driving to work in the rain and realising i used my rear wiper twice, i'm thinking it's not worth getting rid of. i love the practicality of this car, i should stop thinking of ways that reduce that.

my ls400 had 5% tint on the rear window and it was vergining on downright dangerous in the wet,

even during the day i couldn't see a single thing out the rear window - i was too afraid to change lanes, and merging onto the freeway was like gambling with your life!

still, it's a damn good looking rig.

still got that m35 wiper mike?

I hate the f**king little thing, you use it and then it highlights how dirty the car is cos you've got a clean n on the rear window...

Im de-baging mine in the next few days and will look into wiper removal.

Any tips on de-baging?

haha, i think your sentiments are clear!

every car i've debadged i've had success with just heating the area with a blow dryer to soften the glue, then sliding a piece of fishing wire behind the badge and use a gentle pulling/sawing motion. they come off pretty easy. then to get the remaining glue off use some wax and grease remover and just dab it on, let it sit for a minute, then wipe off gently (don't scrub, you can damage the clearcoat).

then hit it with some polish and then wax, and it should be good to go. worst that can happen is you mess it up somehow, and you have to stick the badge back on.

i know it's not deleted, but the alternative to the standard wiper is to swap it for an m35 one like i did

img0207jk.jpg

Mike, does the wiper from an M35 bolt straight on, and does it cover the same sweep area when it's used?

*goes to steel one from Jetwreck's car while it's off the road*

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...