Jump to content
SAU Community

Recommended Posts

Time to design swivel mounted gyroscopic fuel tanks. You could call them "GyroTanks", since this is a problem that effects all cars you could make a universal "GyroTank" conversion kit. "GyroTank, GyroTank get your GyroTank conversion kit today" they would say. It could change the motor industry forever, you could also expand and have "GyroCupHolders" "never spill your hot beverage again with the new product from Gyro Co International the GyroCupHolder. I think someone here needs to take this idea and run with it!

Can't confirm, but been told the V35/M35 fuel gauge acts as a fuel consumption gauge too, so if you thrash it it'll say you have less but if you drive conservatively it'll give you more.

But this could be 100% wrong, just what I heard through a random stagea/nissan convo.

i think you might be right. would sound right and it happens in my sisters V35

aaron she still hasnt called me. can you let her know im expecting her call still?

also, mine does that when i hammer it. maybe its because of the fuel moving around so much it takes the lowest average reading, when youre driving normally, the fuel doesnt move as much and thus you get a higher reading

aaron she still hasnt called me. can you let her know im expecting her call still?

also, mine does that when i hammer it. maybe its because of the fuel moving around so much it takes the lowest average reading, when youre driving normally, the fuel doesnt move as much and thus you get a higher reading

Iaiaiaiain even I dont have your number, why would she? lol

i just thought there would be a level sensor n it was just missing it.

Iaiaiaiain even I dont have your number, why would she? lol

i just thought there would be a level sensor n it was just missing it.

You will be seeing the level sensor as soon as you empty the tank and we can get that Walbro in. Its a simple carbon track float sensor, the smarts are inside the car in the BCM I think... Craig have you translated that BCM wiring diagram yet? :whistling:

You will be seeing the level sensor as soon as you empty the tank and we can get that Walbro in. Its a simple carbon track float sensor, the smarts are inside the car in the BCM I think... Craig have you translated that BCM wiring diagram yet? :whistling:

Speaking of which, If i empty it tomorow do you wanna do it then? or wait till i come around on wednesday??

whichever is easier for you big fella!

Craig reckons it wont take long to do. I wouldve done it tonight but I think its a must that I go to the movies with the GF. lol

i think your car being a C34 IS the problem, chuckie

im glad this problem isnt affecting m35s, im pretty sure ive parked on some very steep slopes facing up and downhill and the car started fine

might be due to the shape of the fuel tank?

rekon an m35 fuel tank would fit in a c34? i have a spare :)

This happened to me last night. Fuel gauge was reading just before the bottom line and the light was not on. as I drove up a really steep hill with a sharp right hand bend, I started to loos power then conked out halfway up the hill! And then wouldn't start again. :huh:

Didn't know what was going on, then I remembered reading this thread. So I rolled back down the hill a bit, then it started and I drove off. Filled up the tank and it didn't do it again.

So I assume it must have been this problem. (I hope) :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...