Jump to content
SAU Community

Burning Oil Smell

ironpaw

By ironpaw,
in Four Door Family & Wagoneers

 Share

Recommended Posts

ironpaw Veteran

ironpaw

Posted
Posted

I noticed that after every drive I can smell burnt oil. I can't seem to find any leaks. When I had the car checked out a month ago by Stateroads they mentioned there was a slight leak/seepage "around the engine" and from the turbo.

Is this why I'm getting the smell? What should I do...

Link to comment
https://www.sau.com.au/forums/topic/346256-burning-oil-smell/
Share on other sites
matty_M35 Collaborator

matty_M35

Posted
Posted (edited)

Check te passenger side rocker cover toward the rear.. Common prob.. Mine was leaking a little.. Got $$ off my sale price.. The oil can slowly leak out there and run onto the turbo area causing the burning smell.. Nissan should be able to get u the gasket no probs cost me $26

As state roads told u it may be the turbo that's just coz the smell and or smoke generally comes from that area but it's so hard to see specifically. They told me the same thing..

If that's not the prob keep looking and make sure ur oil levels are always good..

See how u go..

Edited by matty_M35
andy65b Veteran

andy65b

Posted
Posted

usual leaks are

1) around the spark plug closest to the passenger (is a know spot to seep on VQ motors)

2) oil around the turbo. Is a bitch to get to with the heat shields.

Other option, put your vents on Recycled air.. lol

iamhe77 Grand Master

iamhe77

Posted
Posted
Check te passenger side rocker cover toward the rear.. Common prob.. Mine was leaking a little.. Got $$ off my sale price.. The oil can slowly leak out there and run onto the turbo area causing the burning smell.. Nissan should be able to get u the gasket no probs cost me $26

If that's not the prob keep looking and make sure ur oil levels are always good..

See how u go..

:D

Usually this oil will leak onto your turbo as Matt said or even the heat shields which obviously get very, very hot.

ironpaw Veteran

ironpaw

Posted
  • Author
Posted
usual leaks are

1) around the spark plug closest to the passenger (is a know spot to seep on VQ motors)

2) oil around the turbo. Is a bitch to get to with the heat shields.

Other option, put your vents on Recycled air.. lol

Hmm I can only smell it when I get out of the car - I dont smell it with the air vents on.

So I need to replace the gasket...eek how much will this set me back?

Oil levels are fine - I changed the oil 2 weeks ago and it certainly wasn't low. A good 4-5 litre of old oil drained out. I replaced it with 5L of Mobil 1.

PetroDola Proficient

PetroDola

Posted
Posted (edited)

ive got oil line leaks on the stock turbo not huge but evident. bit of a worry. - which is no doubt helping kill this turbo prematurely.

only just noticed since i got under there to pull the starter out - new braided lines and speedflow connections will smack that on the head with the hiflow.

i think ive also got a rocker cover leak on the passenger side.. so when its engine out time for the turbo replacement (when i can afford it) that gasket number will come in handy. thanks.

:- got my donkey syringe ready also for the spark plug change.. expecting cylinder 1 to look like a mote of oil.

think i might leave my car at jetwrecks and see if he wants to pull my engine out for me.

Edited by PetroDola
PetroDola Proficient

PetroDola

Posted
Posted
So just ask for gasket for a VQ engine?

I was more worried about the labour. I'm not terribly mechanically capable - maybe I'll ask Scotty to fix it when I take my car in for the exhaust job :(

scotts m35 zorst centre.. at scotts house.

hehe , suprised hes not asking for an hourly rate ;)

PetroDola Proficient

PetroDola

Posted
Posted (edited)

well i just got off the phone to nissan.. sobering very sobering.

apparently the 2002 nm35 stagea vq25det part number for a starter motor is this :- 23300-AL600 -$1400 3 weeks to order none in country

the j32 maxima does not suit.. the guy was looking at the bolt pattern its different again.

there was also a 2002 350z one with the part number 23300-AL900 that was $1495 - none in country and also 3 weeks to get in. (the 02-07 350z have 4 different part numbers and he wasnt sure)

hmm.. looks like starter motors are more of a bitch than once thought.

also that part that you quoted me iamhe77 the nissan parts guy said it was a bolt :( - unless he was clueless.

$1500 and 3 weeks though.. that sucks.

Edited by PetroDola
zoomzoom Mentor

zoomzoom

Posted
Posted
well i just got off the phone to nissan.. sobering very sobering.

apparently the 2002 nm35 stagea vq25det part number for a starter motor is this :- 23300-AL600 -$1400 3 weeks to order none in country

the j32 maxima does not suit.. the guy was looking at the bolt pattern its different again.

there was also a 2002 350z one with the part number 23300-AL900 that was $1495 - none in country and also 3 weeks to get in. (the 02-07 350z have 4 different part numbers and he wasnt sure)

hmm.. looks like starter motors are more of a bitch than once thought.

also that part that you quoted me iamhe77 the nissan parts guy said it was a bolt :( - unless he was clueless.

$1500 and 3 weeks though.. that sucks.

Had to re-read your post, I was going to say $1400 is a little steep for a gasket...lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...