Jump to content
SAU Community

Recommended Posts

I haven't had cars that have done way-out figures like the ones above...

but I must admit that I've been so concerned about several cars getting close to 200,000km, so I'd sell them.

That mentality I guess, is a carry-over from my parents saying pearls of wisdom like...

"There comes a time when repairs can cost more than maintenance" (with me thinking of buying their own Fiat 2300)

"Don't buy other people's problems" (whilst looking at a Monaro)

"If you can afford to run it, you can afford to buy it" (when I considered a Jag XJ-S)

"You'll kill yourself" (when I had my heart set on a used MG-B as my first car > got a new Datto 1600 instead)

:thanks: Mum and Dad

hahaha, good work done by your folks... Jag XJ-S nice car... know someone who has one that is pushing 600rwkw.

My old man used to have an old magna. That had done just over 40K before it started blowing smoke........lol......POS!!!

But seriously.....old nissan/Datsuns just go for ever. My mate had a 180b that had done over 400K. We used to flat change that thing no clutch all the time and just kept taking it. To the point when he bought a new car so we did all we could to kill the 180b to no avail. The gearbox finally gave way after endless 2nd gear limiter launches. Its funny....when you wanna blow an engine ya cant!

Edited by greensa14

My old man used to have an old magna. That had done just over 40K before it started blowing smoke........lol......POS!!!

But seriously.....old nissan/Datsuns just go for ever. My mate had a 180b that had done over 400K. We used to flat change that thing no clutch all the time and just kept taking it. To the point when he bought a new car so we did all we could to kill the 180b to no avail. The gearbox finally gave way after endless 2nd gear limiter launches. Its funny....when you wanna blow an engine ya cant!

and then the opposite when your not trying to blow an engine but you do... hahaha

Nobody mentioned the Volvo P1800 that has done well over 2.6 million miles, not kilometers, miles.

All high-mileage vehicles still traveling our nation's roads, however, must tip their rusty hats to this one, Irv Gordon's 1966 Volvo P1800 with 2.6 million miles under its belt-line. Gordon has been the only owner of this P1800 since it was purchased new in 1966. A 125-mile round trip daily commute and a penchant for regular maintenance got the car this far, and in 1998 it made the Guinness Book of World Records at just 1.69 million miles.
Edited by DivHunter

well to put in a GTR a mate of mine bought his 32 GTR in japan in about 1993 or so and brought it into aus. he's owned it ever since and has done over 200,000kms on it. and that car is immaculate. I would consider buying it if he wanted to sell.

I'm pretty sure there was a Taxi driver in Greece who had a Mercedes for 20+years and it did something rediculous like 2 or 3 million KM's without ever needing an engine/drivetrain replacement.

As far as I know, Mercedes now have this specific Merc in their museum now....

  • 1 year later...

Mate of mine had a 91 Toyota Camry 2.0L 4 cylinder, it done 550,000 Kms on the original engine and still going strong. In the end he traded it on a new car and the Toyota dealer kept it in the showroom to showcase Toyota's reliability.

well to put in a GTR a mate of mine bought his 32 GTR in japan in about 1993 or so and brought it into aus. he's owned it ever since and has done over 200,000kms on it. and that car is immaculate. I would consider buying it if he wanted to sell.

Just park it on Parramatta Road, it'll have 45,000km in no time lol

i know of a few people who have had cars with the clock on their second time around the clock.

i had a commodore that was an ex company car. was 12 months old (almost to the day) when i got it and had 80,000kms on it. my sister in law used to drive from gympie to noosa and back everyday for work (about a 130km round trip). she used to have a liberty but as the kms started racking up she started having problems with it so got a vx commodore. it has been pretty much hassle free other than a problem with the fuel pump.

if i had to choose between an import with 400,000kms on it or a commodore/falcon with the same, i'd probably take the aussie car.

good choice, my prelude has 33*,*** on it and it's on its fourth engine..... srsly.

mind you i don't know if the speedo still works.

Edited by tweety bird

My old work ute a 3.2L V6 rodeo had 410000 HARD km on it put a clutch in it at bout 280 but that was it i had 1.3t of brick rubble on its back few times dragged over 1700kg of structural steel on a big twin axle trailer countless times it had close to a tonne of tools on it fulltime as im a boilermaker/plumber so 2 lots of trade tools basically . It drove perfectly didnt blow smoke idled perfect and still went like the clappers did lose a lil power before we got rid of it though :worship: But it was serviced every 5000km as those motors have small oil journals apparently and gum up easily :thumbsup: Was heavy on juice though lol

my daily is a daewoo 1.5i. currently has around 312,000kms still with the original engine and gearbox (mainly highway km's from what I'm told). had it for the past 4 years and still going strong lol. the interior on the other hand hasn't held up as well.

I bought a KE30 corolla off original owner that had full service history, receipts of purchase ($4700 Brand new for car)

(First service was $31, Oil was $2) lol. Had original plates and owner had paperwork of every time it clicked over which was 7 times and now on 54,000 so 754,000km and all original box which feels awesome lol and original motor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...