Jump to content
SAU Community

Recommended Posts

I haven't had cars that have done way-out figures like the ones above...

but I must admit that I've been so concerned about several cars getting close to 200,000km, so I'd sell them.

That mentality I guess, is a carry-over from my parents saying pearls of wisdom like...

"There comes a time when repairs can cost more than maintenance" (with me thinking of buying their own Fiat 2300)

"Don't buy other people's problems" (whilst looking at a Monaro)

"If you can afford to run it, you can afford to buy it" (when I considered a Jag XJ-S)

"You'll kill yourself" (when I had my heart set on a used MG-B as my first car > got a new Datto 1600 instead)

:thanks: Mum and Dad

hahaha, good work done by your folks... Jag XJ-S nice car... know someone who has one that is pushing 600rwkw.

My old man used to have an old magna. That had done just over 40K before it started blowing smoke........lol......POS!!!

But seriously.....old nissan/Datsuns just go for ever. My mate had a 180b that had done over 400K. We used to flat change that thing no clutch all the time and just kept taking it. To the point when he bought a new car so we did all we could to kill the 180b to no avail. The gearbox finally gave way after endless 2nd gear limiter launches. Its funny....when you wanna blow an engine ya cant!

Edited by greensa14

My old man used to have an old magna. That had done just over 40K before it started blowing smoke........lol......POS!!!

But seriously.....old nissan/Datsuns just go for ever. My mate had a 180b that had done over 400K. We used to flat change that thing no clutch all the time and just kept taking it. To the point when he bought a new car so we did all we could to kill the 180b to no avail. The gearbox finally gave way after endless 2nd gear limiter launches. Its funny....when you wanna blow an engine ya cant!

and then the opposite when your not trying to blow an engine but you do... hahaha

Nobody mentioned the Volvo P1800 that has done well over 2.6 million miles, not kilometers, miles.

All high-mileage vehicles still traveling our nation's roads, however, must tip their rusty hats to this one, Irv Gordon's 1966 Volvo P1800 with 2.6 million miles under its belt-line. Gordon has been the only owner of this P1800 since it was purchased new in 1966. A 125-mile round trip daily commute and a penchant for regular maintenance got the car this far, and in 1998 it made the Guinness Book of World Records at just 1.69 million miles.
Edited by DivHunter

well to put in a GTR a mate of mine bought his 32 GTR in japan in about 1993 or so and brought it into aus. he's owned it ever since and has done over 200,000kms on it. and that car is immaculate. I would consider buying it if he wanted to sell.

I'm pretty sure there was a Taxi driver in Greece who had a Mercedes for 20+years and it did something rediculous like 2 or 3 million KM's without ever needing an engine/drivetrain replacement.

As far as I know, Mercedes now have this specific Merc in their museum now....

  • 1 year later...

Mate of mine had a 91 Toyota Camry 2.0L 4 cylinder, it done 550,000 Kms on the original engine and still going strong. In the end he traded it on a new car and the Toyota dealer kept it in the showroom to showcase Toyota's reliability.

well to put in a GTR a mate of mine bought his 32 GTR in japan in about 1993 or so and brought it into aus. he's owned it ever since and has done over 200,000kms on it. and that car is immaculate. I would consider buying it if he wanted to sell.

Just park it on Parramatta Road, it'll have 45,000km in no time lol

i know of a few people who have had cars with the clock on their second time around the clock.

i had a commodore that was an ex company car. was 12 months old (almost to the day) when i got it and had 80,000kms on it. my sister in law used to drive from gympie to noosa and back everyday for work (about a 130km round trip). she used to have a liberty but as the kms started racking up she started having problems with it so got a vx commodore. it has been pretty much hassle free other than a problem with the fuel pump.

if i had to choose between an import with 400,000kms on it or a commodore/falcon with the same, i'd probably take the aussie car.

good choice, my prelude has 33*,*** on it and it's on its fourth engine..... srsly.

mind you i don't know if the speedo still works.

Edited by tweety bird

My old work ute a 3.2L V6 rodeo had 410000 HARD km on it put a clutch in it at bout 280 but that was it i had 1.3t of brick rubble on its back few times dragged over 1700kg of structural steel on a big twin axle trailer countless times it had close to a tonne of tools on it fulltime as im a boilermaker/plumber so 2 lots of trade tools basically . It drove perfectly didnt blow smoke idled perfect and still went like the clappers did lose a lil power before we got rid of it though :worship: But it was serviced every 5000km as those motors have small oil journals apparently and gum up easily :thumbsup: Was heavy on juice though lol

my daily is a daewoo 1.5i. currently has around 312,000kms still with the original engine and gearbox (mainly highway km's from what I'm told). had it for the past 4 years and still going strong lol. the interior on the other hand hasn't held up as well.

I bought a KE30 corolla off original owner that had full service history, receipts of purchase ($4700 Brand new for car)

(First service was $31, Oil was $2) lol. Had original plates and owner had paperwork of every time it clicked over which was 7 times and now on 54,000 so 754,000km and all original box which feels awesome lol and original motor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...