Jump to content
SAU Community

Recommended Posts

Hi all,

Would it be OK to fill up the R34 GTT with 91 RON petrol and then treat it with Nylon Pro octane booster?

From the reviews Ive read, Nylon Pro is the bets one out there and raises the octane rating past 98 PULP.

Its just I can get access to 91 petrol but not 98... atm.

If that's all you can get where you are atm, then it'd be best to do just that.

Whatever your mean average RON is, sitting in your tank atm, the octane booster is only going to shift it up marginally.

You'll get a better result with toluene (ie methylbenzene), depending on what amount you put in; but through regular skin contact and inhalation, it's carcinogenic.

Link to comment
https://www.sau.com.au/forums/topic/348414-octane-booster/#findComment-5602755
Share on other sites

if you got 98pulp in your tank and you drop in octane boost

how much more would it raise the pulp?

105pulp?

Doesn't quite work like that mate. As in theory adding more octane booster again would give you 111RON, then 118RON. Until you ended up with 300RON super fuel to run an engine with 37:1 compression...... laugh.gif

Link to comment
https://www.sau.com.au/forums/topic/348414-octane-booster/#findComment-5603658
Share on other sites

Running Octane booster in general is a bad idea.

A once off is ok for emergencies... But then you can just stay off boost/light throttle and you'd be fine.

If you keep using it you'll run the chance of fouling plugs after a few tanks, and that'll make it just 10x worse over time than using proper fuel :)

Link to comment
https://www.sau.com.au/forums/topic/348414-octane-booster/#findComment-5604234
Share on other sites

a mate of mine was a mechanic for repco a few years ago (the local repco store had a workshop on the side of it) and one day the nulon rep came through and had an octane test kit with him. my mate grabbed some BP ultimate out of his car and they ran a few tests. first they tested the fuel by itself. it was 98 octane (as you wuold expect). next they put in the standard measure of the pro strength octane booster (i think. this was about 5 years ago now so the memory is a bit dodgy). pretty sure this put it up to about 103 octane. then they put in double the normal dosage. the octane rating actually dropped back down to around 99 octane.

Link to comment
https://www.sau.com.au/forums/topic/348414-octane-booster/#findComment-5604477
Share on other sites

just run it on 91, unless you have an aftermarket ecu tuned for 98 it wont be a problem. with a stock ecu your better off with 91 than 98 anyway.

if you use octane boost make sure you have plenty of cash for spark plugs, you'll be changing them every 2nd tank. not to mention o2 sensors and other shit like that

Link to comment
https://www.sau.com.au/forums/topic/348414-octane-booster/#findComment-5605357
Share on other sites

just run it on 91, unless you have an aftermarket ecu tuned for 98 it wont be a problem. with a stock ecu your better off with 91 than 98 anyway.

if you use octane boost make sure you have plenty of cash for spark plugs, you'll be changing them every 2nd tank. not to mention o2 sensors and other shit like that

are you missing that he said it was for a GTT, or are you taking the piss? the stock turbo ecu is tuned for minimum 95 octane fuel. running it on 91 octane will result in a loss of power, or if the knock sensors aren't working correctly a damaged motor. 95 or 98 octane will result it more power and safer knock levels.

Link to comment
https://www.sau.com.au/forums/topic/348414-octane-booster/#findComment-5605486
Share on other sites

are you missing that he said it was for a GTT, or are you taking the piss? the stock turbo ecu is tuned for minimum 95 octane fuel. running it on 91 octane will result in a loss of power, or if the knock sensors aren't working correctly a damaged motor. 95 or 98 octane will result it more power and safer knock levels.

+1

Most people know that Australian 91RON unleaded is basically served as shots in Japanese bars... Our fuel sucks. Thus, imports not originally made for the Australian market should be run on 95 or better...

Link to comment
https://www.sau.com.au/forums/topic/348414-octane-booster/#findComment-5605679
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...