Jump to content
SAU Community

Recommended Posts

I have no interest in a driving a truck what so ever, but dont try and tell me how bad all the other drivers are i watched a truck today on teh ring road push everyone out of its way as it was doing well over the speed limit and if someone didnt move he rode there bumper on those air brakes making a heap of noise until they moved not to mention the dodgy lane changing..

truck drivers calling other people bad drivers is an absolute joke!

Your a sports car enthusiast and your painting all truck drivers with the same brush?

What is wrong with you?

That's the same as saying you've seen some skylines drive dangerously, therefore no skyline driver should comment on other drivers.

The vid isn't targetting cars specifically...on more than one occasion he comments about trucks costing him side mirrors. Truth is, almost everyone on the road is a pretty average driver and we all make bad mistakes from time to time. Alas, convenience is the price on human life. Compulsory licence retesting for the win...

Woah I was not expecting the trucks to behave like that towards each other in the video ... the cars yeah they are stupid and do dumb things because most people have nfi about how hard it is to pull up a truck but you would think that other truck drivers would have an idea of just how hard it is.

I have no interest in a driving a truck what so ever, but dont try and tell me how bad all the other drivers are i watched a truck today on teh ring road push everyone out of its way as it was doing well over the speed limit and if someone didnt move he rode there bumper on those air brakes making a heap of noise until they moved not to mention the dodgy lane changing..

truck drivers calling other people bad drivers is an absolute joke!

I don't know if you actually watched the whole video through, but the footage clearly shows a number of trucks doing the wrong thing with a caption pointing it out.

No one said there aren't idiots out there driving trucks, but they do have a cnut of a job.

I've spent a lot of time driving unusual vehicles, such as tractors, motorbikes and oversize vehicles, around the city and I can tell you it's tough. I also have spent a lot of time around heavy vehicles as my dad did interstate for years and is now a coach driver and my best mate owns a transport company.

I'd say from my experience, which is vast, 80% of truck drivers are good drivers and drive well.

On the flip side I'd say 35% of car drivers are good drivers and drive well.

there is a few like that going around, some dude on a push bike scanning rego's and putting up a report about them. so many un-registered cars on the road

Thats why i'm sus of people always towing trailers, as i met someone who drove around un-regoed for well over a year. Yep with a regoed trailer on the back!

My arguement is, I see a LOT of truck drivers doing well over the 100 kmh speed limit; Yet their trucks apparently say "90 kmh speed restricted"? Some idiots need their licence taken away.

Im on the road day in day out for work as well, And even I've seen some pretty crazy shit.

You need to respect trucks on the road, Look at their tare weight. They are beasts on the road.

I take my hat off to the guy who recorded that. We need more drivers like HIM on the road, And not wankers who think a 40tonne truck is a sports car.

Most newer trucks store speed info in their on-board computers, I know the cops in SA (A few years ago now) have approched Cummins, etc for use of the plug in consult laptops to be used checking trucks speed along the Great Australian Bight. So even if they were speeding 2 days before hand they would still get fined.

I personally didn't see any problems with half of that footage, however being in the drivers seat(of a 70odd tonne vehicle) is different to watching some video. Its not even about respect for trucks, it is pure fear in my books. You do not know how well maintained they are!

Your a sports car enthusiast and your painting all truck drivers with the same brush?

What is wrong with you?

That's the same as saying you've seen some skylines drive dangerously, therefore no skyline driver should comment on other drivers.

check my many posts i am the last person to jump on the "hoon skyline driver" bandwagon, if people want to to cry over askyline in the paper caught doing skids causing more trouble for them they should get their head checked.

I'm yet to encounter a decent truck driver, i only encounter them on the western ring road/princes and they are fkd, now they are banned from the right lane they push people out of the way in the remaining 3 lanes they are meat heads who think cos they are in a truck we should all move for them. I have no problem slowing down when they sit on my bumper at 100kmh.

Had an EPH earthmoving b-double cut me clean off on a round about on Mornington Peninsula on Friday... I literally had to stop!

This dickhead just pointed at me out of his cabin as if to say "stop I rule the road".

Granted a lot of drivers of cars and trucks do a lot of things wrong, but this was plain stupid.

Had an EPH earthmoving b-double cut me clean off on a round about on Mornington Peninsula on Friday... I literally had to stop!

This dickhead just pointed at me out of his cabin as if to say "stop I rule the road".

Granted a lot of drivers of cars and trucks do a lot of things wrong, but this was plain stupid.

You didnt try going up the inside of him did you?

Cause you really should give a B-double space at a roundabout its just the courteous thing to do.

Had an EPH earthmoving b-double cut me clean off on a round about on Mornington Peninsula on Friday... I literally had to stop!

This dickhead just pointed at me out of his cabin as if to say "stop I rule the road".

Granted a lot of drivers of cars and trucks do a lot of things wrong, but this was plain stupid.

If he was in the intersection first, then he's in the right. If you were trying to get up the inside of him, then he was in the right.

I'm going to predict, that as you didn't actually hit him, the first point is probably close to the mark. I mean, if he pulled out in front of you even though you had entered the roundabout first you would have A) Got around him or B) run into his front right corner.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...