Jump to content
SAU Community

Recommended Posts

  • Replies 125
  • Created
  • Last Reply

Top Posters In This Topic

JasonO, apart from the manifold itself, I also had to have the aircon oulet modded so it didnt interfere with the manifold, and the power steer res moved so the turbo fitted

Pretty sure you dont have these probs with the HKS kit manifold. Mine is tuned lenght, but I think it would be better to go 3-2-1 as the japs do, that is, if you were making your own.

Good news guys, I placed my order for the HKS GT3037 Special Turbine Kit yesterday morning :uh-huh:

Steve,

Looks sweet, thanks for the photos, you know they've saved you from having to answer a gazillion questions from me :rofl::(

B-Man,

Gotta love that shiny look, which exhaust manifold have you used ?

Hey Steve, just wondering what you're using the small catchcan to the left of your radiator for. I know the one at the rear is oil, but the front one?

I'm going to have a upgrade next week and will end up with a spare. Would be good if i could put it to use.

JasonO, good luck, I am sure you will be happy with it.

Steg33, that is actually the radiator overflow. With the trust plenum you have to remove the stock washer bottle, so I converted the stock radiator overflow to a washer bottle, then fitted the overflow can. Sligthly different to a catch can, as it feeds from the bottom and has a vent at the top.

Hi Steve, when you changed from the standard RB25 inlet system you lost the cooling system bleed valve on the top in the plenum. Is there some other way that you get the trapped air out of the engine now?

i have no idea, perhaps one of the many others running trust plenums could enlighten you? (B-Man, what did you do with the cooling system bleed valve?)

what is a cooling system bleed valve?

how often do you need to bleed air out of the cooling system?

how does it get trapped in the engine?

why doesnt coolant displace it?

does the engine get vapour locks?

how long does it take before this becomes a problem?

how do GTRs get around this?

do they have a cooling system bleed valve?

why doesnt the cooling system get bled when the car is serviced if it is an issue?

cheers

Guest INASNT
INASNT,

that's the breather hose from the catch-can to re-circulate the ventilated gases.

legally and environmentally, that's the proper way to do it rather than veinting it out to the atmosphere.

I did that temp on mine awhile back but when u pull the hose off the intake u get oily residue all over the intake.

  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...