Jump to content
SAU Community

Recommended Posts

did you increase boost when you did the tune?? the boost could push the BOV open and assist with venting the air through the valve

could be right. mine was at 17psi tuned i think previous to my boost issue. and wasnt doing it..

gave it a spray with WD40 and this improved the opening of the BOV and reduced the noise.. :)

well i know what im doing tonight :)

as iaiana said, by how much.. perhaps another sound clip?

going over the stagea getting it in "ok" condition for mondays track day. my track car wont be back from the tuner in time so have to track the stag for the final time.

found my front rhs driveshaft is leaking a right royal mess. changed out the filters, re-bleeding brakes atm with some quality brake fluid.

i now have a working horn!

and i changed my parkers and rear numberplate lights and interior lights to LED. interior ones arent as bright as id like. i might get some ebay ones as jaycar didnt have the best range

I changed my exhaust today from the Raizer muffler that came on the car to a Fujitsubo Legalis Cat back system that I picked up on Ebay for $600.....

OMG!!! The performance difference is MASSIVE.

So.......I had a look inside the old muffler.........do you think this might have been restricting flow a little ?

88f51aa0.jpg

e867c753.jpg

10172da0.jpg

Was driving down to Canberra on Friday with my trailer in tow and had to make a road side stop to remove the Grub screw from the BOV. It made the car damn near un-drivable with grub screw in. Car was staggering and shuddering every time I lifted the slightest bit off the throttle.

Will be doing some more work on Wednesday on the BOV with some silicon spray that I hope will improve the performance of the BOV.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...