Jump to content
SAU Community

Recommended Posts

Yeah cheers guys, I know about the chasis rail idea and I'm staying clear of it. In my trade I've seen tons of jobs stuffed up due to people using incorrect tools or methods.

I've heard of a way you can get access to the ring gear to stop the engine turning over, I'll slide under tomorrow and have a look. My other option is I have access to an impact bar, sort of like a breaker bar but you hit the end of it with a hammer, should get in there easy with that. I dont really want to have to go pick it up so I'll look into ring gear access first lol.

A manual is so much easier. Put it in gear and foot on brake. Damn auto!

mate i am with you dont risk it do it with the punch bar put it on the bolt hit with hammer done safe. You could also if you have the standard radator take it out have it core flushed cost me cheap while out do the timing belt makes it so much easier.

mate i am with you dont risk it do it with the punch bar put it on the bolt hit with hammer done safe. You could also if you have the standard radator take it out have it core flushed cost me cheap while out do the timing belt makes it so much easier.

Yeah done, went and got my 1/2" impact bar from work today and had it off in no time. I had the coolant system flushed out about a year ago so I'm not to worried about it. I wasn't keen on removing the radiator because I didn't want to deal with the auto fluid lines going into it.

I managed to lift the radiator up enough to see if the rattle gun would fit. No good, the AC coil is still in the way.

Got my alarm fitted on the weekend, picked it up Monday. Took longer than expected, but it's working now, ah well.

Surprised to find the mirror covers with LED indicators were scotch locked in. Got disturbed during install and disconnected my LH indicators >_< Installer found it though so it's all good.

I'm thinking the best way to do alarms and immobilisers in these things is to replace all the scotch locks and dodgy wiring on the factory unit then install an aftermarket Australian standard one. This is how GT Autosound do it and this way you get to keep cool stuff like your mirrors dipping and folding in, and the interior light turning on when you unlock the car.

Pretty happy with the end result though, even if it is a bit more simple.

My Freeway Dolphin strut brace has arrived at work, but I'm holed up at home for a couple of days. Might have to swing past and pick it up tomorrow, then work out if I have room for a plenum spacer and the strut brace, or choose between the two.

Next mod almost definitely a set of BCs. Can't stand the ride as it is now. Rotors, intercooler and spot lights are also high on the priority list.

Nah Craig told me to ditch it ages ago, as it traps too much heat apparently.

I'll let everyone know once it's on. I'm hoping room for the plenum spacer and strut brace. Fingers crossed!

I don't care about the engine cover...just wanna know if I can run the brace....

Oh and the dents I mentioned in an earlier post:

Do you think I should get it fixed before going to get a retune this Sat, or is not much of an issue?

post-75595-0-77913000-1309939114_thumb.jpg

post-75595-0-14226000-1309939124_thumb.jpg

post-75595-0-98520100-1309939138_thumb.jpg

no it will be installed in my new engine. i pretty sure with the spacer on, you cant have the engine cover AND the strut brace. but 19mm shouldnt foul the brace i rekon

i think its time for scott to make a custom one lol

I don't care about the engine cover...just wanna know if I can run the brace....

Oh and the dents I mentioned in an earlier post:

Do you think I should get it fixed before going to get a retune this Sat, or is not much of an issue?

OUCH!! i think youll be ok mate, go for the tune

Ok so I fitted the strut brace, and because Im a clumsy dick I made it take much longer than it needed too, as i kept dropping the 12 mm nuts from the strut tops...

So Ive lost one nut... Would I be right to drive it for a day while I get a replacement?

Or is there a less important 12mm nut somewhere on the car I can steal temporarily?

Only can find 14mm nut. Not sure how many they have. If it has 3 and your missing one it will be fine but if it only has 2 and missing one I would carefully head straight to Japanese import spares and grab the correct 12mm nut from a skyline.

Edited by slippylotion

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...