Jump to content
SAU Community

Recommended Posts

Jase, not that it helps now but to remove the double sided tape use a caramel wheel. My mate debaged mine and used this to easily remove the tape and gave the car a cut and polish. Can't tell there was ever a badge there.

Spent about 3 hours scrubbing away at the double sided tape/foam that the japs must have used for aerials. Unfortunately the previous owners never bothered to remove them so they were pretty much rock hard.

Also debadged the rear end.

Going to get some quotes on how much to spray my wing black/spray my new grille and fix a small dent in the passenger door and most likely respray the bonnet tomorrow. Previous owner did some "touch ups" that most people would refer to as graffiti. I'm hoping I can get away with all of that work for under a grand. No idea though..

How bad is it? I have a card somewhere for a mobile guy who does amazing work pretty cheap.

How bad is it? I have a card somewhere for a mobile guy who does amazing work pretty cheap.

If you could trust him on my GTR can you pass on his number :thumbsup:

Jase, not that it helps now but to remove the double sided tape use a caramel wheel. My mate debaged mine and used this to easily remove the tape and gave the car a cut and polish. Can't tell there was ever a badge there.

Yeah it really needs a cut and polish now. All of the tape has been removed but it just needs to be cut back to get the layer of crap off of it now.

How bad is it? I have a card somewhere for a mobile guy who does amazing work pretty cheap.

They aren't that bad, just a hell of a lot of them. At least 10 chips on the bonnet that have been touched up.

I'll see if I can find his card and PM you guys. I want him to look at mine too.

He did some work on the front of my parent's old Audi Q7... couldn't even tell there'd been damage, and he did it all in their driveway for bugger all. From memory they found him on Solitare's recommendation.

Oh, and my BCs turned up yesterday! :banana:

None of my new stuff will be in before the cruise but I'm hoping everything will be done before the track day, except maybe the Emanage. Have to work a couple of things out first.

Yes very happy about the coilovers. It only took a bit over twice as long as I was quoted in the end :whistling:

You going to the cruise? Should try and make it, I want to check out this trans cooler and radiator!

You going to the cruise? Should try and make it, I want to check out this trans cooler and radiator!

Not sure yet. I have a birthday party and engagement party on that day. Of course I know none of the details. If you want to check it out sometime though just let me know. You're out north east, yeah?

I'm north, but yeah I'll be driving around the place on the weekend so if you can't make the cruise I can drop past some time.

If you haven't got the details for the cruise let me know, or PM Big Fella and one of us will send it to you.

Just got a quote from All Type to do my bonnet/wing/grille and a general tidy up around the place. Not half bad pricing, and from what I've heard - very good reputation. Just gotta wait until the wheels go on in case there's any.. accidents. :whistling:

Edited by jasevr4

+1 for All Type Crash

Went there to get my flaky spoiler and some front end damage from some idiot in a shopping centre fixed.

They did a good job, in a short time at a good price. Ruby also got his respray there and while I was there saw 2 other stags getting fixed so they know how they go together/come appart (c34's atleast)

Having said that if you go to Willaston Paint and Panel and tell him (edit* Matt) that Glenn in the yellow stag sent you he'll sort you out

Edited by SatchiThaStagea

Hayden's a champ, and everything I've seen from All Type looks awesome.

Today I ordered my HDI intercooler. Just have to decide on a power steering cooler, then I can order the trans cooler too.

Anyone running an engine oil cooler?

I don't think it's required, even for track work, but I would be keeping an eye on the temps...

I think Jetwreck has popped a P/S pump due to trackwork. But tend to agree, cooling p/s fluid for non-racecars might be a bit over the top... (Because Racecar... you know)

Interestingly - my car has a small stock P/S fluid cooler - just a finned U bend, sits just behind the grill.

I think Jetwreck has popped a P/S pump due to trackwork. But tend to agree, cooling p/s fluid for non-racecars might be a bit over the top... (Because Racecar... you know)

Interestingly - my car has a small stock P/S fluid cooler - just a finned U bend, sits just behind the grill.

I spoke to Craig last week, he said he'd found a power steering cooler was essential, and a trans cooler was recommended.

Looking into it, g35s and z33s seem to all have had stock power steering coolers, with Nismo and Stillen making enlarged aftermarket units.

So Im confused why we dont have one, but I will get one soon, just have to finish my research. :cheers:

Because our car was not really designed as a ..... Track bitch......more of a family cruiser.....had they done a sports version of the m35 like the 260rs.......well we have all seen the 380rs haven't we!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...