Jump to content
SAU Community

Recommended Posts

got in m35 tonight to drive it.Turned on ignition.

A W D LAMP COMES ON (STAYS ON)

A T LAMP LIGHTS UP "

A B S LAMP ALSO COMES ON WITH A SLIGHT HUM HEARD WITH IT.

GEAR DISPLAY SHOWS WHEN TURNING ON BUT GOES OUT WHEN PUTS CAR INTO GEAR.

LOW BEAM LIGHTS COME ON WITHOUT TOUCHING CONTROL.(WONT CHANGE TO HIGH BEAM, BUT TURNS OFF WITH IGNITION)

This is beyond my tired old brain.Any suggestions would be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/349851-old-hoon-needs-help/
Share on other sites

car starts/ runs?

hi Chris,yes/yes ran it around block slowly, seems sort of ok.hard to tell. It changed gear a couple of times,once a bit rough.brakes also seem just a bit rough.hard to explain.

best to ask someone near you to plug in a consult cable with laptop to find out what the errors are.

or disconnect battery for 24hrs, retry. hope its just a minor glitch.

Probably not best, I dont think that plug fits into the obd2 port. :)

Check all the fuse boxes, all 3, and like Tangles said, disconnect the battery, clean the terminals, and reconnect after a few hours. If you have no joy, Im guessing there is a fault with the BCM? Perhaps try reconnecting all the plugs on it, its under the fuse box in the kick panel.

Probably not best, I dont think that plug fits into the obd2 port. :)

Check all the fuse boxes, all 3, and like Tangles said, disconnect the battery, clean the terminals, and reconnect after a few hours. If you have no joy, Im guessing there is a fault with the BCM? Perhaps try reconnecting all the plugs on it, its under the fuse box in the kick panel.

Hey Scotty,remember its me you'r talking to

whats the BCM?

best to ask someone near you to plug in a consult cable with laptop to find out what the errors are.

or disconnect battery for 24hrs, retry. hope its just a minor glitch.

Agree. Take it to a Nissan Dealership and get them to put it on their Consult 3 (it will tell them in plain English where the issue is)

Agree. Take it to a Nissan Dealership and get them to put it on their Consult 3 (it will tell them in plain English where the issue is)

Just a quick thank you to those who gave me advice.

Because of no garage to work in for the last 3-4 days while we had this horrendous wet spell,i was unable

to look at the car until Yesterday.In fact i went out to the car turned on the ignition and lo and behold it had

cleared itself.I took the car to my mate at Lees mobile mechanical in Caloundra.

I didn't know it, but he has Snap On diagnostic set up and what do you know it had m35 Stagea and most imports on it.

After checking all fuses, connections etc etc, he found no fault codes on the car through his diagnostic scan tool.

He thinks that there was some moisture in the electrics which have had time to dry out.

So good news on 2 counts.

! the car is ok and 2. I have a connection for any one who needs to check out their cars diagnostics

without having to pay through the nose at Mr Nissan.

Once again cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...