Jump to content
SAU Community

Recommended Posts

VQ25DET engine oiltype.

I was hoping to use Royal Purple to do an oil change but cant locate a supplier in Brisbanes western suburbs

I was going to use a fully synthetic 10w-40w synthetic. what is a good second choice /

The 50 odd pages on oil in the skyline forums don't relate to this motor and opinion is very diverse because of the different motors spoken of.

does the turbo run off the engine oil?

Link to comment
https://www.sau.com.au/forums/topic/350673-vq25det-engine-oil-type-to-use/
Share on other sites

yes the turbo uses the engine oil for lubrication and some cooling (there are water lines for additional cooling)

a 5w30 or 10w40 is fine. even a 10w30.

nissan say 7.5w30 but only they make that weight. im trying factory nissan oil on the next change (hopefully this weekend coming)

VR38DETT GTR uses mobil 1, 0W- 40 at Nissan service... can't be bad!

I think its pretty much been covered before, but most agree a high quality oil form Gulf Western, Motul or Royal Purple. 5L of it.

oils are one of these things people get picky about. So there are loads of opinions flying round.

Nissan oil defiantly isn't derived from a Motul oil stock, trying to think back to the last time I actually looked into this once before and for some reason either Castrol or Caltex keep popping into my head over who manufactures Nissan's retail bottled oil.

Either way, I use Castrol Edge 5w-30, its a good synthetic oil for the price otherwise yeah, lots of options under the sun. Motul oils are widely used (Turbolight and X-Cess come to mind) and they're a great oil. Again nothing wrong with Royal Purple, that stuff there is like liquid candy for your engine so its a real treat.

And there is absolutely nothing wrong with Nissan's own spec oil either, I can't remember if its a mineral or synthetic base stock oil though but they have only the 1 oil suits all for their petrol engines which as Iain said is 7.5w30, a strange number Nissan come up with but there you go.

If you really, really want to find out a bit more about which oils are really good, good, not so good and crap, invest a day or so at Bob Is The Oil Guy and have a look at the forums and results there.

As an aside, I have been changing every 10,000kms with a Group V oil and my Stagea has passed 200,000kms and is still running beautifully.

Nissan oil defiantly isn't derived from a Motul oil stock, trying to think back to the last time I actually looked into this once before and for some reason either Castrol or Caltex keep popping into my head over who manufactures Nissan's retail bottled oil.

Last time I looked into it there was evidence that Nissan uses or has used a Motul derived oil. I can't find any of the links (with a quick search). I don't know if this is fact, like most keyboard warriors I am only repeating what I have read.

Any decent semi-syn or synthetic oil with around 10w-40w will do the job fine as long as you service the car with sensible intervals. With the low cost of oil testing it is worthwhile sending a sample away if you want to know what is happening inside your engine.

gulf western sougi s6000 is the cheapest you can get in a great syn (as good in my opinion as anything else) and comes in at about $60

royal purple can be bought through autobarn for about $100

or motul 300v chrono will be about $120

i haven't used the others but the gulf western oil is great

i ran nulon syn but apparently its only a group 3 syn whereas the others listed above are group 5

the nulon got noisy after about 3000 kms

gulf western sougi s6000 is the cheapest you can get in a great syn (as good in my opinion as anything else) and comes in at about $60

royal purple can be bought through autobarn for about $100

or motul 300v chrono will be about $120

i haven't used the others but the gulf western oil is great

i ran nulon syn but apparently its only a group 3 syn whereas the others listed above are group 5

the nulon got noisy after about 3000 kms

+1

Just too bad that the Sougi S6000 is now discontinued :down:

If ever there was a case where shit marketing let an awesome product down, that would be it.

Also agree with Nulon. Full synthetic my arse.

(it doesn't go well in Magna's either :ermm: )

Last time I looked into it there was evidence that Nissan uses or has used a Motul derived oil. I can't find any of the links (with a quick search). I don't know if this is fact, like most keyboard warriors I am only repeating what I have read.

Any decent semi-syn or synthetic oil with around 10w-40w will do the job fine as long as you service the car with sensible intervals. With the low cost of oil testing it is worthwhile sending a sample away if you want to know what is happening inside your engine.

I requested an oil test and got a company in Sydney reply that it wouldn't be worth my while so I didn't pursue this.

Who have you used?

There was a thread on this in forced induction recently started by Duncan but if you can't find anything useful there, Dan at Elite Racing Developments in Qld should be able to point the way to who he uses but pretty much they send you a sample jar to be returned.

I use the penrite full synth 5w30 it comes in around $50 and after 5 to 6 thousand kms it's still smooth running and not too dark when drained..

I've been using penrite for years Now since all my 4AGE modding days and never had any probs never saw any build- up and deposits when pulling apart engines.

That's just my 2cents..

oil should be dark when drained

it has degreasers and detergents in it and its a common misconception that clean oil is good oil

if it comes out clean then its not doing its job

oil should be dark when drained

it has degreasers and detergents in it and its a common misconception that clean oil is good oil

if it comes out clean then its not doing its job

AMEN to that. finally someone who knows what used oil should look like when its drained from an engine.

^^ ok let me rephrase it is definately darker just not sludgy like some lower line oils come out.. Full synth oils definately come out cleaner after 5000kms then a semi/ mineral base since there meant for longer use.

U can't argue that. I'm not saying it makes an oil better or worse it's just a fact.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...