Jump to content
SAU Community

Recommended Posts

i'm getting a new exhaust and muffler and just wanted to know what ppl think is the best thing to get

i'm looking at getting a Manaflow race series muffler:

#14843

2.25" Inlet, 4" Diam. Tip

2.5" Internal Race Core

Single Wall, Staight Cut

4" Tip Length

14" Muffler Body Length

this any good for a N/A rb25?

and what is best for the exhaust, 2.5 inch or 2 an 1/4inch?? from extractors back

with a cat but no resonator, or should i resonator?

thanks every one!

Link to comment
https://www.sau.com.au/forums/topic/35083-just-a-quick-one-on-exhaust/
Share on other sites

resonator is a definite, i agree. Forgot to ask what the guy who replaced mine was going to use - so i ended up with a lukey race hot dog thingy :( .... murder at 110kmh (open road limit here in WA) 3" pipe probly doesn't help... SEVERE overkill on 2L N/A....:looney:

let us know how the change gos... might do the same thing :thumbdwn:

I got a 2.5" hks system with 2 resonators (hotdog resonator and a 2nd small muffler). It works well - not droney AT ALL. The end main muffler is a big barrel style muffler with 2.5" inlet and has a 4.5" tip - it is not straight through in design. I suggest you copy the design of this system (resonators etc) :D

2.5 is definately the biggest u should go, u should get more top end with the bigger diameter exhaust. 2 1/4 is good for low down power. The muffler itself is straight thru yeah ? i would go the 2.25" and a resonator to save ur hearing, but still have it loud :D

Clint

what brand of rear muffler do you gouys use/recomend? i have some Jaz - Jazma ? -can't rember exactly, something like that - i guess it's some cheap Jap brand, but it is straight through, like the resonator, on the extractors with a full 3" cat also...

just one major question, how would you fit an offset muffler in where ther is currently a straight through?

ie how does this;

| |

| |

goto this;

| |

__| |

??? given the way the pipe runs from the engine (tangled round diffs etc.) then fits into that little scallop out of the rear bar?

Jasma is just a regulatory body, like the EPA is Australia. It's not the brand of the muffler, but if the muffler is jasma approved it means it meets certain noise/pollution requirements and therefore is of reasonable quality. For example, my HKS system has a jasma badge on it.

i'm also thinking about a CAT back system - my budget aint that big - but i want something thats going to sound better and increase performance slightly...

i got quoted 290 fitted for a 'home made job', as the muffler place reckons you can't get one to just bolt on? That was for a 2.5" cat back (might only have been the rear muffler)

What kind of system do you guys recomend for 300-350 ish mark?

anything has to be better than stocko one!

PS: Sorry for the post hijack :D

can some of you guys tell me a few price u payed for your systems?

sorry dude, mine was already there... resonator cost me $120, extractors ~$350 i think ? can't remember exactly... the rest - gawd knows !

i have recently taken off my cat back exhaust as i was driving a bit of a road trip. I noticed quite a bit of power loss all through the range.

and Perhaps a week ago, i put it back on, and damn there is power again, noticable low and high in my rev range, but definately more at top end.

Mine is 2 3/4", and its drony in certain RPMs (mainly at 110 on motorway), most of the time, its sexy. Get a big resonator, big as possible imo.

  • 4 months later...

You've probably already got it by now but go a 2 1/2 inch mandrel bent system. I've got a magna flow muffler, #14827, its a single wall angle cut 4 inch tip, but oval shape. I was told they had a slightly better tone and not as droney... not sure if its entirely true. They also fit more neatly under the car, however i was after the cannon style and they do look a bit better. I highly recommend magnaflow though, just ensure you put a decent resonator on as mine hardly does anything and it's fairly loud!

I think I'm going to finally get rid of the Genie Reverse Flow muffler off my car, its just tooo loud! Currently I have 2.5" Cat Back, with a resonator.

Anyone who has done their exhaust cat-back, what muffler and how much was it? An angled canon style would b good, but not really necessary.

I think I'm going to finally get rid of the Genie Reverse Flow muffler off my car, its just tooo loud! Currently I have 2.5" Cat Back, with a resonator.  

Anyone who has done their exhaust cat-back, what muffler and how much was it? An angled canon style would b good, but not really necessary.

I've used a MagnaFlow Street Serious muffler, the exhaust shop were retailing it for 374 but it may be cheaper elsewhere. Yeah the angled cannon style does look good. This one is an oval shape but exhaust shops do the angled bend if you just get a cannon style

Anyone recommend an exhaust shop in the Melbourne city area that fits magnaflow mufflers and will do it for a good price?

When I got the current exhaust/muffler fitted I asked them to put a flange so it can be unbolted, and its 2" up to just before it bends.

thanks!

chicane

Yeah quite a few places sell MagnaFlows as they're fairly reputable and well known. Depends where in Melbourne you are, i got mine done at Casey Exhaust which is in Berwick, they do a lot of work on high performance cars and have done heaps of skylines. The other place i know of that sell them is Dandy Exhausts but your best to just ring around as i'm sure many other places would stock them

I work in Parkville so yeah anywhere close to the city

What other options are there apart from magnaflow (seems a popular brand) for a muffler in the cannon style that will not be too loud, im sick of the drone of my current muffler.. but not too quiet as well (but under limit).

Cheers :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...