Jump to content
SAU Community

Recommended Posts

I always shoot in full manual

First time shooting at night with my prime lense. Had some issues with focus but these two seemed ok. Might be how they are resized like you said. The lense is pretty sensitive to what is in and out of focus but so I may have been just a bit off

I always shoot in full manual

First time shooting at night with my prime lense. Had some issues with focus but these two seemed ok. Might be how they are resized like you said. The lense is pretty sensitive to what is in and out of focus but so I may have been just a bit off

the second one is in focus, the focus point is the rear windscreen tho.

with the first one turn the car wheels so the face of the rim is facing the camera instead of the tyre ;)

its not as in focus either. maybe try stopping the lens down a bit more too as 1.8 open wide isnt always that great for car shots as the DOF is a bit too small except for detail shots.

still pretty cool though, wish i wasnt so lazy keen as to do night photos but never have the motivation to get out there and do it, lol.

Edited by Jay019

Ah ok, Maybe thats my problem

Last time I took car shots at night they had alot of noise and I realised afterwards I had my ISO right up (whoops). So the photos looked alright on the little camera screen but as soon as they went on a laptop there was far to much noise in them. Beginner mistake, something I should have relised but oh well...

I Think thats why I was overcompansating with the lowest ISO I could use and adjusting the apature right down So I wouldnt have to drop the shutter speed (If I'm further off doing the right thing then I relise here I'm happy to take some constructive critisism, ISO was at about 400, Apature at 1.8 and shutter speed was between 1/20 and 1/40 or around abouts. Like I said but I overcompansated with the ISO cause of last time)

Ill put another 2 photos from the night up. The Lighting in the Skyline one isnt right, but Its a bit better focused. The one of the monaro I think suffers from the same issues as the above photos but not as bad (now that you guys bought it to my attention lol...)

SPY33Front.jpg

MonaroRear2.jpg

Like I said I'm open to critisism, I dont mind these photos but I know there a long long way from alot of you guys in here. But I'm willing to learn and try out different shooting methods. I like to think I'm slowly improving lol

Thanks

P.S. That first photo of my car where you said the wheels are facing the wrong way..... I was parked Illegally in the middle of a road so just ran out to grab a photo before anyone came haha. Should have thought about the angle of the wheels in alot of these photos but I was being pretty lazy on the night

Edited by 89CAL

Here's some I took at Circuit Club's Twilight event last Thursday night.

Here's Matt:

IMG_1751.jpg

Some random S2k in the next garage:

IMG_1753.jpg

IMG_1756.jpg

A really nice Evo also sharing the next garage (and "Aggroman" Dave in his R34):

IMG_1760.jpg

IMG_1761.jpg

"Pezhead" Eric's engine:

IMG_1757.jpg

And Dave's R34 again:

IMG_1764.jpg

IMG_1787.jpg

along with the man himself (kinda :P ) as well as Eric giving Dave some pro tips:

IMG_1752.jpg

Sorry about your loss mate.

We've had her about 7 years and she was living in a friends front yard, so she doesn't lay too often these days. Still get a few, if we can find them :P The dog usually follows her around, they're good friends! Lol

Damn I'm hot in a helmet. When you can't see my face i reckon i have a pretty good to average looking face ;)

Hahaha - for a second there I thought you had some crazy weird fluffy animal hanging from the front mirror :P

Ps two taken during our Simpson Desert trip last year:

5481004451_2c0dcb5aa9.jpg

Dingo Tracks by ZENN0N, on Flickr

5485293634_21f20d746d_z.jpg

Staring into the desert by ZENN0N, on Flickr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...