Jump to content
SAU Community

Recommended Posts

Im being told that rb20's make power easier than 25's

Also that my mate has 270rwkw from his rb20det...

There was a thread created a while ago for people with rb20's making 260rwkw or more and all seemd to have trouble getting there

Just to confirm rb20's make less torque, have more turbo lag and as a genral make less power if the mods where the same for an rb25

?

Link to comment
https://www.sau.com.au/forums/topic/352824-rb20det-and-rb25det/
Share on other sites

Im being told that rb20's make power easier than 25's

No. A mate of mine has basically the same mods on his RB20DET as I have on my RB25DET. We both have upgraded turbos on stock manifolds, stock motors, aftermarket ECU and fuel system etc.

My car is tuned on BP98 at 17psi and makes 301wkw, same dyno his car tuned on 30% ethanol and 21psi makes 295kw. He gives me a bit of a run for my money on midrange torque - probably more to do with extra boost and better fuel, but his falls flat at 6000rpm and mine keeps making more power. On the same fuel and boost I have roughly 50kw on him, better off boost torque and way better midrange.

No comparison.

Il grab the list of mods and let you guys decide

apparently stock injectors, stock ecu.. 3incj zorst, fmic, 18psi, flat top pistons, to4e turbo and a tune making 256rwkw

il update if there are any mods i left out

Il grab the list of mods and let you guys decide

apparently stock injectors, stock ecu.. 3incj zorst, fmic, 18psi, flat top pistons, to4e turbo and a tune making 256rwkw

il update if there are any mods i left out

stock injectors would not let you produce that much power.

I've owned both RB20DET and RB25DET, for someone to say RB20DET makes more power easier than RB25DET mod for mod, they must be on drugs >_<

Mod for mod, the RB25DET will make more power easily, why on earth would R32 boys be putting RB25DET motors into their cars? Go figure!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...