Jump to content
SAU Community

Recommended Posts

  • Replies 163
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I have to say a MASSIVE thanks to Justin (the supplier of these injectors) for the massive help he's given me with a few problems I've had that were out of his control. His service was second to none and I rate his professionalism and helpfulness as some of the best out there. Don't even hesitate to think about buying from him; just do it!

In other news, I've got the car running as can be seen in the video posted above, I just need to get it in for a tune now and all will be sweet

no group buy ends 04/03/11 and refer to quote

All prices above are for a group buy only. This assumes 1 order, 1 payment, 1 delivery address. Payment via bank deposit only. Paypal payment will incur 2.4% surcharge. Please allow up to 2 weeks after payment for order to be dispatched.

how ever it is possible for you to pay full price from the supplier and get your own shipped to you

yep, thanks its just standard

i need to contact the supplier to find out about something otherwise you will need

80lb Siemens $345,

wiring harness $42,

Blue fuel rail $225

shipping $25 Total $637

More information taken straight of his ebay page

Available in:

Red and blue for RB30. Chrome can be optioned for $20 extra.

Red, blue and gold for RB26. Please note RB26 rail kit can run both 11mm and 14mm Oring injectors. Chrome can be optioned for $20 extra. Gold currently out of stock.

Blue only for RB25 (suitable for R33 RB25 only)

Please specify which of the above you require when ordering.

Rail kits do not come with injectors. Aftermarket fuel regulator will need to be used.

I was after a pic of the id2000 rail

Cheers

he said the fuel rail suits the injectors which suit your car picture's are very similar

also

just got off the phone to the supplier and he can supply 10.5mm hats for the 3/4 length injectors

they will be more expensive than the 11mm hat that is supplied for aftermarket rails that take 11mm

when ordering please do as much asking of your tuner what sort of options you have available, i would hate for people to order the wrong parts

for the r32's do the injectors have to be Hi-Impedance?

ive got 700cc siemens low-impedance in my 32 atm . . .

Edited by I8EE

does your 32 run the same low impedance thing that GTR's run?

On Edge - any type of aftermarket FPR will work im getting prices on some Tomei ones

also

Good news on the RB26 height adapters for use with the EV14 Bosch injectors. I can do the 10.5mm adapter for $8ea extra on top of the original price. I will need approx 2 weeks lead time though once we have numbers.

Good news for the 80lb boys, please put me down steve for 80lb injectors to suit r33 rb25, also fuel rail an adaptors if neccesary.

Maybe a z32 aswell mine maybe stuffed ill let you know on that one so don't put me down as yet.

1000cc are 3/4 length and need the height adapters

you can get the 80lb/h close the 1000cc (95lb/h) with more fuel pressure your tuner can advise on this though

**note**

price change applied to those wanting the 80lb/h injectors

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...