Jump to content
SAU Community

Recommended Posts

For Sale:

32 4 door seats. front 2 on rails and back 2 seat components with arm rest.

Condition: good no ciggerette burns, no wear holes, but a little sun fadding on back headrests.

Price $80 the lot. Have a 2nd full set will sell both $140

Contact Details: PM or msg on 0421823875

PM sent, interested in fronts but will take the lot if u need em gone (one set)

(im guessing the fronts will fit in a 2 dr??)

NISSAN SKYLINE R33 GTS-T S1 M-SPEC

ENGINE:

RB26DETT conversion

RB26 sump w/transfer case sliced off

RB25 engine mounts

RB25 Harmonic balancer

HKS Intercooler

BLITZ front pipes

SIGNAL straight through carbon muffler

HKS Pod filters

Splitfire coil packs

TODA Racing clutch

TODA Racing 4.5kg Flywheel

CUSCO 2 way mech diff

IRIDIUM Plugs - 6's

R33 GTR fuel pump

SUSPENSION / BRAKING AND HANDLING:

SELBY rear 28mm sway bar

RACING GEAR coilovers

D1 rear camber arms

D1 HICAS lock

CUSCO front tension rod

Solid rear subframe bushes

D1 adj castor rods

PROJECT MU Slotted front rotors

TRW (LUCAS) brake pads all round

NISMO Front strut brace with brake stopper

GTR rear strut brace

BODYWORK & INTERIOR

Full body respray in Blood Orange

Satin Black bonnet and wing

SPARCO bonnet pins

NARDI Steering wheel

TRUST gear knob

SPARCO Spirnt drivers seat w/ BRIDE Rail

GReddy Profec B Spec II boost control

GReddy Turbo Timer

New Carpet

GReddy Boost Gauge

engine has spun a bearing , have R33 GTR Bearings to go on the engine

also have R33 GTR Crank that has been linished and polished with oil galleries filled with grub screws

R33 GTR Pistons & Rods

R33 GTR Oil Pump (Rebuilt)

Possibley interested in trades

Price $14,000 ono

bhmqt.jpg

would have more pics but GPU in my pc has died so i cant access the hard drives for now.

im selling r33 srII carbon bonnet ! $300

momo appache steering wheel in blue/black!! i bought for $450 15mths ago give me an offer??

also srII dash inserts and temp aircon button! the clock insert and a few other bits! make an offer !

aslo 1 set of 4 stock rims! tyres are crap ! rims $150 txt or call me on 0428721284 im in west lakes if u want to have a look !! cheers !

R33 gtst HKS exhaust, 3.75" $400 used

86.5mm Custom Flat top CP pistons $1300 new

RB30 Spool 4340 Forged Rods $600 new balanced

KU Engineering RB26 Plenum (Similar to JUN, internal bell mouth trumpets) $750 new

80mm Billet Throttle body $200 new

RB26 3" non-split dump pipes (have seen 820hp through these, ceramic coated) $500 used

Rb26 Tomei Pon Cams 260 9.15 $900 used

Matt

0413023669

Pics on request

Edited by BoostdR

A few parts for sale

- S14a SR20DET Cometic Metal Headgasket 88.5mm (brand new) $100

- S14a 4 x 550cc Blitz Injectors (Brand new) $500

- S14a Standard exhaust $100

- S14a Grill in very good condition $50

- S14a Rear spoiler in very good condition $50

- S14a Front Bar cover in very good condition $100

- S14a Genuine trust sump $350

- S14a, 180, s13 Split fire coilpacks with ignition amplifier $350

- R33 Series 2, two sets of standard springs $50 a set

- R33 Series 2 rear muffler $50

- R33 Brand New Nismo 555cc injectors with genuine nissan o-rings $1000

- R33 HKS Super drager muffler 3 1/2 inlet 5 inch tip $50

- D-Project Front lower arm bar brace (brand new) $100

- C's Short shifter for S14a used for 1 month, been sitting around for 6 $200

- 1JZ Non VVTI BRAND NEW in box Trust/greddy TDO6 20G turbo kit high mount,external gate, filter everything you need to bolt on 300kw + $3500 cheappppp

please pm me thanks

post-46081-1236577369_thumb.jpg post-46081-1236577297_thumb.jpgpost-46081-1236577418_thumb.jpg post-46081-1236577481_thumb.jpgpost-46081-1236577572_thumb.jpg post-46081-1236577732_thumb.jpgpost-46081-1236577877_thumb.jpg post-46081-1236577915_thumb.jpgpost-46081-1236577994_thumb.jpg post-46081-1236578051_thumb.jpg

im selling r33 srII carbon bonnet ! $300

momo appache steering wheel in blue/black!! i bought for $450 15mths ago give me an offer??

also srII dash inserts and temp aircon button! the clock insert and a few other bits! make an offer !

aslo 1 set of 4 stock rims! tyres are crap ! rims $150 txt or call me on 0428721284 im in west lakes if u want to have a look !! cheers !

SMS sent I will take the Carbon Bonnet

Got a mate selling his car to grab an R32 :banana:

Have spent well into the $15,000+ in maintenances and mods including buying the car since got it in about April this year.

Looking at selling for $11,000 ono or swap for a cheaper car with cash my way but will consider any serious offers.

It has:

Engine:

CA16DE engine 202,xxxk's

K&N Pod Filter

think its a 2.25" cat back exhaust system

Exterior:

Xracing BN front bar

Xracing edge side skirts

Xracing RB02 rear bar

16" mags with near new tyres. only been on 3 weeks. haven't nd never have spun tyres.

EVO skin bonnet

GP stickers on doors

Interior

Tan Leather re-trim

Issota sterring wheel (i think it is)

cut down gear shifter

GP glove box

Sound System

New 08/09 Pioneer DVD head unit

soundstream 6.5" front speakers

Pioneer 5.25" rear speakers

2x Clarion 12" subs

2x Clarion 450W amps (i think its 450W)

Spares:

stock front bar

4xGP stock mags with tyres

4x 16" tyres

Xracing edge (jetspeed copy) front bar

BN rear bar

2x bonnets (one with WRX scoop on)

spare Hatch with GT wing

plus other interior bits and pieces.

Probably forgot some things

there are pics in the build thread and in the album in the profile.

http://www.nissanexa.com/forum/showthread.php?t=46008

http://www.nissanexa.com/forum/album.php?albumid=68

Contact me via PM on here or email at [email protected]

Also has another 11months of rego.

here is the carpoint add to the car as no more in the links from last posts. http://www.carpoint.com.au/used-car/NISSAN...4.aspx?State=SA

will sell for 6gs or around there as found a few cars i am keen on, unless someone has one around that price willing to trade.

frontview.jpg

Canon EOS-20D Digital SLR Body only

Excellent condition

Purchased in Australia (Adelaide)

come with box and everything you get when buy new

$600

Reason for sale: upgrade to 5DmkII / 1D mkIII

Review: http://www.dpreview.com/reviews/canoneos20d/

still selling my R34

click below for infor

$14000

Item can be view in CBD or eastern suburb

Please pm me thanks

Edited by Maxx
A few parts for sale

- S14a SR20DET Cometic Metal Headgasket 88.5mm (brand new) $100

- S14a 4 x 550cc Blitz Injectors (Brand new) $500

- S14a Standard exhaust $100

- S14a Grill in very good condition $50

- S14a Rear spoiler in very good condition $50

- S14a Front Bar cover in very good condition $100

- S14a Genuine trust sump $350

- S14a, 180, s13 Split fire coilpacks with ignition amplifier $350

- R33 Series 2, two sets of standard springs $50 a set

- R33 Series 2 rear muffler $50

- R33 Brand New Nismo 555cc injectors with genuine nissan o-rings $1000

- R33 HKS Super drager muffler 3 1/2 inlet 5 inch tip $50

- D-Project Front lower arm bar brace (brand new) $100

- C's Short shifter for S14a used for 1 month, been sitting around for 6 $200

- 1JZ Non VVTI BRAND NEW in box Trust/greddy TDO6 20G turbo kit high mount,external gate, filter everything you need to bolt on 300kw + $3500 cheappppp

please pm me thanks

post-46081-1236577369_thumb.jpg post-46081-1236577297_thumb.jpgpost-46081-1236577418_thumb.jpg post-46081-1236577481_thumb.jpgpost-46081-1236577572_thumb.jpg post-46081-1236577732_thumb.jpgpost-46081-1236577877_thumb.jpg post-46081-1236577915_thumb.jpgpost-46081-1236577994_thumb.jpg post-46081-1236578051_thumb.jpg

will take a set of the front and rear springs

cheers dean

Item: Uniden UH-077 UHF radio and handset

Condition: Good, still in car at this moment, still works fine.

Reason for Sale: Upgrading to a newer slim unit

Other Comments: Its an older-school UHF radio but shares just as many features of a newer unit. 5W output, 40ch scan, 8ch duplex etc etc. Does not come with antenna, but these are cheap and easy to come by. Will fit in a DIN sized enclosure

Best pic i have of it located below my headunit

CameraDownload1260.jpg

Price: $70 negotiable

Contact: Via PM

Edited by Matty 31

just changed motor over for low kms import,have old block etc to sell complete or singles

bottom block from 33gtst just missing piston 6 due to conrod break,no damage to block but little mark in bore which can be fixed. just couldnt be arsed $500 ONO

Head with/without cams and gears etc, head has 4 bent valves where 6 went $300 ONO

full wire harness 33gtst $20

apexi A pillar skyline gauge holder 2 slots $4O

apexi temp and boost gauge $100 both or $70 each

standard plenum changed to front mount $50

standard heat sheilds from manifold/exhaust $10

33 fan

looking for front piping for front mount,off standard plenum to front right,will swap for

pm me for queries or to buy

just changed motor over for low kms import,have old block and bits to sell complete or singles

bottom block from 33gtst just missing piston 6 due to conrod break,no damage to block but little mark in bore which can be fixed. just couldnt be arsed, Has crank and good fly wheel on still $500 ONO

Head with/without cams and gears etc, head has 4 bent valves where 6 went $300 ONO

full wire harness 33gtst $20

apexi A pillar skyline gauge holder 2 slots $4O

apexi temp and boost gauge $100 both or $70 each

standard plenum changed to front mount $50

standard heat sheilds from manifold/exhaust $10

33 fan $5

looking for front piping for front mount,off standard plenum to front right,will swap for

pm me for queries or to buy

also standard clutch plate with good amount meat on $20

exhuast bit off block $5

For Sale:

32 4 door seats. front 2 on rails and back 2 seat components with arm rest.

Condition: good no ciggerette burns, no wear holes, but a little sun fadding on back headrests.

Price $80 the lot. Have a 2nd full set will sell both $140

post-58153-1236476623_thumb.jpg

post-58153-1236476735_thumb.jpg

Contact Details: PM or msg on 0421823875

Update: pic's of elastic pocket on back of drivers and pass.

post-58153-1236667852_thumb.jpg

post-58153-1236668040_thumb.jpg

Need em gone!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...