Jump to content
SAU Community

Recommended Posts

For Sale:

32 4 door seats. front 2 on rails and back 2 seat components with arm rest.

Condition: good no ciggerette burns, no wear holes, but a little sun fadding on back headrests.

Price $80 the lot. Have a 2nd full set will sell both $140

Contact Details: PM or msg on 0421823875

PM sent, interested in fronts but will take the lot if u need em gone (one set)

(im guessing the fronts will fit in a 2 dr??)

NISSAN SKYLINE R33 GTS-T S1 M-SPEC

ENGINE:

RB26DETT conversion

RB26 sump w/transfer case sliced off

RB25 engine mounts

RB25 Harmonic balancer

HKS Intercooler

BLITZ front pipes

SIGNAL straight through carbon muffler

HKS Pod filters

Splitfire coil packs

TODA Racing clutch

TODA Racing 4.5kg Flywheel

CUSCO 2 way mech diff

IRIDIUM Plugs - 6's

R33 GTR fuel pump

SUSPENSION / BRAKING AND HANDLING:

SELBY rear 28mm sway bar

RACING GEAR coilovers

D1 rear camber arms

D1 HICAS lock

CUSCO front tension rod

Solid rear subframe bushes

D1 adj castor rods

PROJECT MU Slotted front rotors

TRW (LUCAS) brake pads all round

NISMO Front strut brace with brake stopper

GTR rear strut brace

BODYWORK & INTERIOR

Full body respray in Blood Orange

Satin Black bonnet and wing

SPARCO bonnet pins

NARDI Steering wheel

TRUST gear knob

SPARCO Spirnt drivers seat w/ BRIDE Rail

GReddy Profec B Spec II boost control

GReddy Turbo Timer

New Carpet

GReddy Boost Gauge

engine has spun a bearing , have R33 GTR Bearings to go on the engine

also have R33 GTR Crank that has been linished and polished with oil galleries filled with grub screws

R33 GTR Pistons & Rods

R33 GTR Oil Pump (Rebuilt)

Possibley interested in trades

Price $14,000 ono

bhmqt.jpg

would have more pics but GPU in my pc has died so i cant access the hard drives for now.

im selling r33 srII carbon bonnet ! $300

momo appache steering wheel in blue/black!! i bought for $450 15mths ago give me an offer??

also srII dash inserts and temp aircon button! the clock insert and a few other bits! make an offer !

aslo 1 set of 4 stock rims! tyres are crap ! rims $150 txt or call me on 0428721284 im in west lakes if u want to have a look !! cheers !

R33 gtst HKS exhaust, 3.75" $400 used

86.5mm Custom Flat top CP pistons $1300 new

RB30 Spool 4340 Forged Rods $600 new balanced

KU Engineering RB26 Plenum (Similar to JUN, internal bell mouth trumpets) $750 new

80mm Billet Throttle body $200 new

RB26 3" non-split dump pipes (have seen 820hp through these, ceramic coated) $500 used

Rb26 Tomei Pon Cams 260 9.15 $900 used

Matt

0413023669

Pics on request

Edited by BoostdR

A few parts for sale

- S14a SR20DET Cometic Metal Headgasket 88.5mm (brand new) $100

- S14a 4 x 550cc Blitz Injectors (Brand new) $500

- S14a Standard exhaust $100

- S14a Grill in very good condition $50

- S14a Rear spoiler in very good condition $50

- S14a Front Bar cover in very good condition $100

- S14a Genuine trust sump $350

- S14a, 180, s13 Split fire coilpacks with ignition amplifier $350

- R33 Series 2, two sets of standard springs $50 a set

- R33 Series 2 rear muffler $50

- R33 Brand New Nismo 555cc injectors with genuine nissan o-rings $1000

- R33 HKS Super drager muffler 3 1/2 inlet 5 inch tip $50

- D-Project Front lower arm bar brace (brand new) $100

- C's Short shifter for S14a used for 1 month, been sitting around for 6 $200

- 1JZ Non VVTI BRAND NEW in box Trust/greddy TDO6 20G turbo kit high mount,external gate, filter everything you need to bolt on 300kw + $3500 cheappppp

please pm me thanks

post-46081-1236577369_thumb.jpg post-46081-1236577297_thumb.jpgpost-46081-1236577418_thumb.jpg post-46081-1236577481_thumb.jpgpost-46081-1236577572_thumb.jpg post-46081-1236577732_thumb.jpgpost-46081-1236577877_thumb.jpg post-46081-1236577915_thumb.jpgpost-46081-1236577994_thumb.jpg post-46081-1236578051_thumb.jpg

im selling r33 srII carbon bonnet ! $300

momo appache steering wheel in blue/black!! i bought for $450 15mths ago give me an offer??

also srII dash inserts and temp aircon button! the clock insert and a few other bits! make an offer !

aslo 1 set of 4 stock rims! tyres are crap ! rims $150 txt or call me on 0428721284 im in west lakes if u want to have a look !! cheers !

SMS sent I will take the Carbon Bonnet

Got a mate selling his car to grab an R32 :banana:

Have spent well into the $15,000+ in maintenances and mods including buying the car since got it in about April this year.

Looking at selling for $11,000 ono or swap for a cheaper car with cash my way but will consider any serious offers.

It has:

Engine:

CA16DE engine 202,xxxk's

K&N Pod Filter

think its a 2.25" cat back exhaust system

Exterior:

Xracing BN front bar

Xracing edge side skirts

Xracing RB02 rear bar

16" mags with near new tyres. only been on 3 weeks. haven't nd never have spun tyres.

EVO skin bonnet

GP stickers on doors

Interior

Tan Leather re-trim

Issota sterring wheel (i think it is)

cut down gear shifter

GP glove box

Sound System

New 08/09 Pioneer DVD head unit

soundstream 6.5" front speakers

Pioneer 5.25" rear speakers

2x Clarion 12" subs

2x Clarion 450W amps (i think its 450W)

Spares:

stock front bar

4xGP stock mags with tyres

4x 16" tyres

Xracing edge (jetspeed copy) front bar

BN rear bar

2x bonnets (one with WRX scoop on)

spare Hatch with GT wing

plus other interior bits and pieces.

Probably forgot some things

there are pics in the build thread and in the album in the profile.

http://www.nissanexa.com/forum/showthread.php?t=46008

http://www.nissanexa.com/forum/album.php?albumid=68

Contact me via PM on here or email at [email protected]

Also has another 11months of rego.

here is the carpoint add to the car as no more in the links from last posts. http://www.carpoint.com.au/used-car/NISSAN...4.aspx?State=SA

will sell for 6gs or around there as found a few cars i am keen on, unless someone has one around that price willing to trade.

frontview.jpg

Canon EOS-20D Digital SLR Body only

Excellent condition

Purchased in Australia (Adelaide)

come with box and everything you get when buy new

$600

Reason for sale: upgrade to 5DmkII / 1D mkIII

Review: http://www.dpreview.com/reviews/canoneos20d/

still selling my R34

click below for infor

$14000

Item can be view in CBD or eastern suburb

Please pm me thanks

Edited by Maxx
A few parts for sale

- S14a SR20DET Cometic Metal Headgasket 88.5mm (brand new) $100

- S14a 4 x 550cc Blitz Injectors (Brand new) $500

- S14a Standard exhaust $100

- S14a Grill in very good condition $50

- S14a Rear spoiler in very good condition $50

- S14a Front Bar cover in very good condition $100

- S14a Genuine trust sump $350

- S14a, 180, s13 Split fire coilpacks with ignition amplifier $350

- R33 Series 2, two sets of standard springs $50 a set

- R33 Series 2 rear muffler $50

- R33 Brand New Nismo 555cc injectors with genuine nissan o-rings $1000

- R33 HKS Super drager muffler 3 1/2 inlet 5 inch tip $50

- D-Project Front lower arm bar brace (brand new) $100

- C's Short shifter for S14a used for 1 month, been sitting around for 6 $200

- 1JZ Non VVTI BRAND NEW in box Trust/greddy TDO6 20G turbo kit high mount,external gate, filter everything you need to bolt on 300kw + $3500 cheappppp

please pm me thanks

post-46081-1236577369_thumb.jpg post-46081-1236577297_thumb.jpgpost-46081-1236577418_thumb.jpg post-46081-1236577481_thumb.jpgpost-46081-1236577572_thumb.jpg post-46081-1236577732_thumb.jpgpost-46081-1236577877_thumb.jpg post-46081-1236577915_thumb.jpgpost-46081-1236577994_thumb.jpg post-46081-1236578051_thumb.jpg

will take a set of the front and rear springs

cheers dean

Item: Uniden UH-077 UHF radio and handset

Condition: Good, still in car at this moment, still works fine.

Reason for Sale: Upgrading to a newer slim unit

Other Comments: Its an older-school UHF radio but shares just as many features of a newer unit. 5W output, 40ch scan, 8ch duplex etc etc. Does not come with antenna, but these are cheap and easy to come by. Will fit in a DIN sized enclosure

Best pic i have of it located below my headunit

CameraDownload1260.jpg

Price: $70 negotiable

Contact: Via PM

Edited by Matty 31

just changed motor over for low kms import,have old block etc to sell complete or singles

bottom block from 33gtst just missing piston 6 due to conrod break,no damage to block but little mark in bore which can be fixed. just couldnt be arsed $500 ONO

Head with/without cams and gears etc, head has 4 bent valves where 6 went $300 ONO

full wire harness 33gtst $20

apexi A pillar skyline gauge holder 2 slots $4O

apexi temp and boost gauge $100 both or $70 each

standard plenum changed to front mount $50

standard heat sheilds from manifold/exhaust $10

33 fan

looking for front piping for front mount,off standard plenum to front right,will swap for

pm me for queries or to buy

just changed motor over for low kms import,have old block and bits to sell complete or singles

bottom block from 33gtst just missing piston 6 due to conrod break,no damage to block but little mark in bore which can be fixed. just couldnt be arsed, Has crank and good fly wheel on still $500 ONO

Head with/without cams and gears etc, head has 4 bent valves where 6 went $300 ONO

full wire harness 33gtst $20

apexi A pillar skyline gauge holder 2 slots $4O

apexi temp and boost gauge $100 both or $70 each

standard plenum changed to front mount $50

standard heat sheilds from manifold/exhaust $10

33 fan $5

looking for front piping for front mount,off standard plenum to front right,will swap for

pm me for queries or to buy

also standard clutch plate with good amount meat on $20

exhuast bit off block $5

For Sale:

32 4 door seats. front 2 on rails and back 2 seat components with arm rest.

Condition: good no ciggerette burns, no wear holes, but a little sun fadding on back headrests.

Price $80 the lot. Have a 2nd full set will sell both $140

post-58153-1236476623_thumb.jpg

post-58153-1236476735_thumb.jpg

Contact Details: PM or msg on 0421823875

Update: pic's of elastic pocket on back of drivers and pass.

post-58153-1236667852_thumb.jpg

post-58153-1236668040_thumb.jpg

Need em gone!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...