Jump to content
SAU Community

Recommended Posts

for manual boost control you cant go past the turbotech $25ish controller

http://i.ebayimg.com/06/!BW2,JjwB2k~&a...97q5MQ~~_12.JPG

+1 on that, held a steady 13psi for me the whole 12 months i had it on the car :thumbsup:

/offtopic

FOR SALE (still)

RS4 radiator ... 64,000kms old. Should also suit R33 / R34. Upgraded to 50mm alloy rad. Good condition, no longer needed.

Need this gone. Taking up room.

$150 ono

Serious buyers only.

100% up for sale now - My DTM Rush wheels off my GT-R.

They're 18 x 9.5 +27 all round, with 2 mint 255/35/18's and the other 2 are no good.

Like I had said previously slight tiny bit of paint come off 2 of the wheels right round the edge - AAA Powdercoaters will sand blast and repaint for $30 p/rim so cheap easy fix there. Other then that what is needed is 2 new tyres.

There's a few photos of my car floating around with the wheels but if you haven't seen them I'll provide a picture below.

Will make sure they're all freshly cleaned etc for the buyer too.

Only selling due to getting a new set of wheels shortly but for now will be riding stock GTST wheels lol.

GTR01.jpg

DayCruise019.jpg

I'll start the pricing off at $1k for the set ONO.

0433830055

Call, txt, PM, whatever doesn't bother me and if your unsure about the fitment and your willing to do all the work you can even try them on before you buy LOL.

Cheers guys, Let me know.

Wayne.

3 inch stainless cat back suit r33 gtst, with spacer to suit 4 door or without spacer to suit 2 door $500

ASE top of the range front mount 600 x 300 x 76 with all piping to suit 33 gtst cost $1200 sell $700 (good for 400 rwkws)

complete silver 4 door r33 gtst minus engine and trans, still registered everything else is in good condition $5000

pink nismo 550 injectors to suit r33 gtst stilll in fuel rail $500

pm me if your interested.

Nissan Silvia S13

CA Auto Turbo

Runs perfectly

Recently Serviced

Just replaced a new set of spark plugs

Engine been replaced 2 years ago with receipt

Fully electric options Sunroof

Full K's serise factory optional bodykit

SSR 17" wheels cost over $2000 NEW

17x8 235 Front 17x9 255 Rear

Fits the guard perfectly

Apart from the wheels, stock as rock

Very good condition for its age

$6500 with stock wheels

0433 221 994 in Adelaide SA

post-55976-1256954252_thumb.jpg

Price Negotiable if come with cash.

Up for sale is the whole car wreck only (written off) its a 1994 ser 1 model with 164xxxkm still runs and can be driven too but obviously not on the road. has few after market extras

I am selling the car as a whole wreck only will not separate anything as i dont have the time and space for it i need it gone asap cos its been sitting around for a month now. Damage only on the right side of the car

What you see is what you get. inspections welcome.

comes with work maister SSR wheels 17x8 17x9 with 2 brand new tires & other 2 80%

2 wheels damaged as seen in pictures on the right side

3 inch turbo back exhaust

near new air flow meter cost me $400

tein coilovers suspension

Exedy heavy duty brass button clutch

Trust intercooler

Trust panel filter

Trust timing belt

Slotted rotors all around with endless SS pads

no stereo and speakers

redline diff and gearbox oil used

always serviced every 5000km with motul turbolight oil

any other question please feel free to SMS me

PRICE DROP from $4,500 to $3,800

MUST SELL

Borko

0415 466 726

post-46081-1256439167_thumb.jpg post-46081-1256439259_thumb.jpg post-46081-1256439317_thumb.jpg post-46081-1256439392_thumb.jpg post-46081-1256439454_thumb.jpg post-46081-1256439518_thumb.jpg post-46081-1256439603_thumb.jpg post-46081-1256439667_thumb.jpg post-46081-1256439828_thumb.jpg post-46081-1256439965_thumb.jpg

Just found my other set of RB25det coilpacks and loom in the shed.

where fine in the 33, only took them out coz i picked up a set of Splitfires ridiculously cheap.

hmmmm 100 bucks for the set and loom.

oh yeah, there for series II.

0433073302

Expressions of Interest

Group Buy - Siemens Deka fuel injectors

I ordered 6 injectors from Miami last fortnight and they arrived here in rapid time. Ended up costing me $360 for a set of 6 575cc injectors for my RB26dett (low impedance, top feed). A couple of members here are considering getting new injectors, so I was wondering if anyone is keen to join the purchase and maybe get a discount (maybe... $360 is pretty cheap as it stands, as it's half as much the australian distributors want for the exact same injector).

Sizes are from 300-1300cc, top feed only but either low or high impedance

PM me if you're interested - this is a once off and I won't be doing a repeat order.

-D

EDIT - He does do RB25 Neo injector top feed conversion packages for around $600 that include a fuel rail, 850cc injectors, ev6 and ev1 adaptor and seals

Just found my other set of RB25det coilpacks and loom in the shed.

where fine in the 33, only took them out coz i picked up a set of Splitfires ridiculously cheap.

hmmmm 100 bucks for the set and loom.

oh yeah, there for series II.

0433073302

SOLD!

thanks daniel, Nice stag btw :(

hr31 lights projectors and afterburners for sale

i have bought a car i intend to track and dont want to have these on it.

would rather someone else enjoy these as id be scared to break them.

i need a set of front and rear series 3 lights to replace these

price- id say $550ono a set.

post-39965-1257150266_thumb.jpg

post-39965-1257150280_thumb.jpg

post-39965-1257150293_thumb.jpg

post-39965-1257150306_thumb.jpg

post-39965-1257150322_thumb.jpg

man that thing looks soooo much better in photos...

good idea to sell teh lights, be a shame to smash'em

they dont deserve to be smashed cause of me pushing it past the limits of my driving/ learning ability. i like them but think cause of that reason i should pass them on. just trying to see what ppl offer.

car will be soon in shed for mods to be fitted and hopefully be out for next practice to embarrass myself :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...