Jump to content
SAU Community

Recommended Posts

EOI

stock 34 gtt turbo 90ks

almost no shaft play... not of the car yet... as my new one is in the pipeline :D

ill have to check if the new one comes with lines n stuff.

will be off the car in a week or when ever someone really waves cash at me

$400

EOI

stock 34 gtt turbo 90ks

almost no shaft play... not of the car yet... as my new one is in the pipeline :D

ill have to check if the new one comes with lines n stuff.

will be off the car in a week or when ever someone really waves cash at me

$400

PM sent

FS.

R32 GTS-t Type M 4 Pot Front Brakes (280x30mm) - calipers, rotors, caliper hardline. - $150 SOLD

JJR Coilpacks (RB20, S1 RB25, R32/33 RB26) - approx 18 months old - doesn't misfire or any of that rubbish. - $250 SOLD

RB20DET Coilpack Loom - good condition, no misfires. - $100 $50

RB20DET Turbo + Exhaust Manifold - turbo good condition, I never had a boost controller so was running on stock boost. - $150

RB20DET ECCS Inlet Manifold - complete with injectors, fuel rail, throttle body etc. - $150

PM/SMS. 0438858813.

Hey everyone up for sale i have a BRAND NEW good quality oil water line kit to suit RB20/25 with a gt series turbo (low mount) such as GT30 or 35/40

Includes:

2x 60cm braided water lines in -6 with banjo bolt ends and barb fitting for hose that runs around back of engine

1x 40cm braided oil line in -4

3x M14x1.5mm banjo bolts

banjo bolt end and banjo bolt for oil line

90 degree -4 oil fitting and nipple that screws into turbo

all required copper sealing washers

and a few other various 90 degree fittings that arent needed but come with it anyway

Asking $100

was taken out of packet for pic only

th_016-2.jpg

ALSO i have a blown c34 stagea turbo with op6 exhaust housing asking $50 ono

PM or call 0417 899 445 cheers lockie

R33 Series 2 Coil Packs - 6 of them.

Upgraded to yellow jackets as one of them was starting to break down occasionally, rest are fine. No idea which one was breaking down, but you get all 6 so great for spares if you dont want to fork out $400 for yellow packs!

$80 for all of them. NE Suburbs.

Still available. Will take $50 for a quick sale.

For Sale

Inlet and Exhaust Cam Shafts with Cam Gears off of a RB25DET Series 1 out of a C34 Laurel.

Price: $150 ONO, pick up or local delivery. Price is for Cam Shafts & Cam Gears Only, Backing Plate will be taken off - once I figure out how.

Location: Aldinga, SA.

34480_136691673022046_100000436423638_302050_5680113_n.jpg

34480_136691676355379_100000436423638_302051_6177613_n.jpg

34480_136691679688712_100000436423638_302052_4086427_n.jpg

34480_136691683022045_100000436423638_302053_3651964_n.jpg

Got the following up for sale that i need gone, all located in the hills.

Genuine RB20 Water Pump - $80

Genuine RB25 S2 Water Pump - $120

^^ Both Brand New/Unused.

Cefiro Brake Master Cylinder, Looks almost new, hardly used - $50

HKS 2530 Turbo, in good working condition, minimal shaft play, nothing unusual for a ball bearing turbo. $1200 will be available by next weeekend as its still on my car.

Gizzmo EBC, later model with multi scramble feature. in perfect working order, removed due to not being needed. $150

RB20 Power Steering Pump and Alternator - $20 each

Pair of Enkei Circular wheels, PCD 4x114.3, 17x8 +34, in ok condition, few minor marks but nothing major - $250

Best bet is to contact me on 0407 633 573 as im not on here everyday, but PM's will be replyed to :yes:

Few Parts added, need these gone as i need the money!!

Edited by Jms_31
I have 2x gold drifttek for sale 17x8 5x114 not multi stud, not sure of offset but im guessing around the +34 mark comes with 255x40 rubber used but good, some light scratching on i think both rims will get pics up later

$550 all offers looked at, not all accepted

EDIT

because of where the car is parked i could only get a photo of the drivers side

colour, size, offset pics

post-13315-1277284505_thumb.jpgpost-13315-1277284521_thumb.jpg

post-13315-1277284529_thumb.jpgpost-13315-1277284534_thumb.jpg

post-13315-1277284540_thumb.jpg

for description of Hero tyres see >>Here<<

UPDATE 1 rim no good so price drop

1x 8.5" gold Drifttek $150

2x 255x40x17 $200

post-13315-1278672689_thumb.jpg

Hey everyone up for sale i have a BRAND NEW good quality oil water line kit to suit RB20/25 with a gt series turbo (low mount) such as GT30 or 35/40

Includes:

2x 60cm braided water lines in -6 with banjo bolt ends and barb fitting for hose that runs around back of engine

1x 40cm braided oil line in -4

3x M14x1.5mm banjo bolts

banjo bolt end and banjo bolt for oil line

90 degree -4 oil fitting and nipple that screws into turbo

all required copper sealing washers

and a few other various 90 degree fittings that arent needed but come with it anyway

Asking $100

was taken out of packet for pic only

th_016-2.jpg

ALSO i have a blown c34 stagea turbo with op6 exhaust housing asking $50 ono

PM or call 0417 899 445 cheers lockie

pm sent

For sale are some Items off my 98 r34 gt-t

HKS GT 2540-46T, hasn’t done many Km’s upgraded to a bigger garret $1200 ono+shipping

Greedy 600X250X70 return flow FMIC, includes everything you need, clamps, joiners $320 ono+shipping

Stock rotors, plenty of meat left $50 each ono+shipping

Other items include

Qfm A1rm semi track pads 80% left $40+shipping

Stock r34 gtt brake lines $50+shipping

Stock intercooling piping$40+shipping

Located Port noarlunga S.A

0405326532

Please ask for pictures!!!

Hey all. I have a set of black drift teks for sale. They are 17x8 and 17x9 multi stud to suit Nissan. Tyres at 50% all round.

Asking $950 for the set.

Also have a Nintendo Wii package which includes:

Nintendo Wii with all fittings

2x Controllers with 2x nunchucks

Da Blob

Need for Speed undercover

Super Smash Bro's brawl

Wii Sports

$350 for the lot there

All items located at dernancourt SA.

Contact me on 0402 035 914. Can mms pics

Edited by Mowbuss

Bump

EOI

stock 34 gtt turbo 90ks

almost no shaft play... not of the car yet... as my new one is in the pipeline :P

ill have to check if the new one comes with lines n stuff.

will be off the car in a week or when ever someone really waves cash at me

$400

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...