Jump to content
SAU Community

Recommended Posts

hi all i am de modding my stagea

ive got a hks 'gt25/35 54t' turbo

fantastic upgrade for any rb 20 and 25!

huge response and great powerful turbo!

i ran this turbo on 16psi and got 260 rwkw on the neo 25, with usual mods, hit full boost at like 3250rmp :)

it is 15,000ks old, uses stock manfold, dump pipe, and cooler pipes.... great replacement for the stockie.

comes with all bolts, braided lines and oil drain, 12psi actuator (adjustable) this is completely ready to rock

$1500 plus postage

pick up in adelaide welcome or txt 0400099986

post-47249-0-03227200-1306759220_thumb.jpg

post-47249-0-23109000-1306759226_thumb.jpg

post-47249-0-54622900-1306759233_thumb.jpg

post-47249-0-33767800-1306759244_thumb.jpg

post-47249-0-66876300-1306759251_thumb.jpg

post-47249-0-91955200-1306759259_thumb.jpg

rb20/25 intercooler kit

AVARD brand, amazing quality no cutting req as it bolts from the side tanks to the chassis rails!.... no drilling cutting or ghettoness!

comes with all pipes clamps and brackets! $500 no bent fins too !!!

rb25 neo Seimens Deka injectors (top feed)

6 injecors

1x wiring loom (stock one, modded with new plugs)

2xrail spacers

all o rings etc

this will directly bolt up to your stock set up. nothing eles to worry about

$500

tein type CS coilovers

suit auto rs4 stagea (series 1 and 2)

32 wat dampner adj, heigh adj

comes with c spaners, some stickers from new, and the little dampner key.

also will include 10k old isc toe and camber arms

$850

PRICE DROP $800

post-47249-0-68509400-1306759987_thumb.jpg

post-47249-0-58085500-1306759996_thumb.jpg

Edited by chef_stagea

RETURNING TO STOCK!

All aftermarket parts for sale, Im not parting out the car only returning it to stock so if you see any aftermarket parts not listed just mention and I will grab a price.

Contact: 0401 404 104

ENGINE/POWER

- T3/T4 hi-flow turbo with VG30 exhaust housing, Comes with receipts for high flow. Currently making 252rwkw on 16 psi, If quick can be driven on the car.

$800

- Apexi Power FC, With hand controller. Comes with tune for Injectors/AFM/Turbo. $1300

- Turbo Back 3.5" Exhaust, straight through with twin 3" Stainless Steel pipes and built in Apexi Exhaust Valve Control. $650

- Z32 Air Flow Meter (Capable of 400rwkw) $200 (currently on hold)

- 550cc Aftermarket Injectors (Currently running at 77% injector cycle) $400 (currently on hold)

- Nismo Fuel Pressure Regulator $100

- Stainless Steel Intake Pipe $120

SUSPENSION

- TOP STOP Strut brace $150

- Rear Strut Brace $50

- Bilstein shocks with Whiteline Springs (Height Adjustable) $600

- Cusco Brake Stopper $60

INTERIOR

- Oil Temp, Blitz Gauge

- Oil Pressure, Blitz Gauge

- Boost pressure, Blitz Gauge $350 for all 3 gauges and senders

EXTERIOR

- DNA Wheels. 17x9 +30 all round $1100

SPARE PARTS

- JUN front bumper $150

- JUN Sideskirts $100

copyofsdc11928.jpg

copyofsdc11924.jpg

copyofsdc11926.jpg

enginecut.jpg

all up for sale I have:

1x pair stock R32 RB26 GTR manifolds $100 the pair

1x pair stock R32 Rb26 GTR turbo dump pipes $100 the pair.

1x 5-point clip-buckle harness, brand RCI. $50

1x r32 rb26 GTR oil pump, used but in good condition $50

1x r32 RB26 GTR harmonic balancer, in good condition (used) $80

1x oil catch can with mini pod-filter, brand new, $50

1x 3-guage holder set, new. $30

2x Q45 Air Flow Metres, Working condition, with plugs. $100 the pair, or $50 each

1x Z32 Air Flow Metre, working condition with plugs, $100

1x pair pod filters. Brand new never used. $50 the pair, or $30 each seperately

1x stock R32 RB26 GTR Intake pipwork, $50 the lot

1x stock R32 RB26 GTR coilpack cover blue, $100

1 x stock R32 RB26 GTR turbo two-into-one exhaust front pipe, good condition $50

1x 3" decat pipe with flex section, brand new never used $60

1x 3" twin barrel mid-muffler resonator section, brand new never used $80

1x full set Tein suspension to suit R32 GTS-T. Came out of four-door R32. Tein shocks/springs. In good condition $400

thanks. PM me and we'll arrange what you want, etc.

Offers considered

Also forgot to mention I have some 33 GTR rims with Toyo R888 Proxes which aren't very old!

taking reasonable offers now on everything but 25mm spacers, firm @ $100.

G-Tech

Injectors

Wheel studs

R32 disk brakes

etc.........

Well I've been offered $7900 as a trade in on my Stagea rs-4 1998 days edition. Refer to ad in general cars for sale.

If you can beat that offer, the car is yours. I'd really prefer it went to someone who wants one. 0421515816

Bride Low Max GIAS style (same as in pic) used in my 180 for a week and test fitted in my s15 so they are as new they are fiber glass witg black backs..... with power rails. $900 pair

bride material $100....about 1.2meters x 1.8meters

fake defi gauges new in box's never used, comes with all sensors, holders $250 for all 4

they look exactly the same as real defis

r34 rear 5 stud hubs, disks, calipers,pads, hand brake cables $300.

r34 gtt wheels with centre caps, 80% tread on 3 tires, the other has a puncture $400.

s13 sr20 5 bolt diff $40..

s15 weather shields $180 the pair

r34 4dr weather shields $100 for all 4

r34 gtt diff $100

r34 gtt power steering rack $100

located in mansfield pk s.a....pics will be up soon ....http://nissansilvia.com/forums/index.php?showtopic=493273

z32 afm sold

other stuff for sale

1x pair stock R32 RB26 GTR manifolds $100 the pair

1x pair stock R32 Rb26 GTR turbo dump pipes $100 the pair.

1x 5-point clip-buckle harness, brand RCI. $50

1x r32 rb26 GTR oil pump, used but in good condition $50

1x r32 RB26 GTR harmonic balancer, in good condition (used) $80

1x oil catch can with mini pod-filter, brand new, $50

1x 3-guage holder set, new. $30

2x Q45 Air Flow Metres, Working condition, with plugs. $100 the pair, or $50 each

1x pair pod filters. Brand new never used. $50 the pair, or $30 each seperately

1x stock R32 RB26 GTR Intake pipwork, $50 the lot

1x stock R32 RB26 GTR coilpack cover blue, $100

1 x stock R32 RB26 GTR turbo two-into-one exhaust front pipe, good condition $50

1x 3" decat pipe with flex section, brand new never used $60

1x 3" twin barrel mid-muffler resonator section, brand new never used $80

1x full set Tein suspension to suit R32 GTS-T. Came out of four-door R32. Tein shocks/springs. In good condition $400

WP_000069.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...