Jump to content
SAU Community

Recommended Posts

hi all i am de modding my stagea

ive got a hks 'gt25/35 54t' turbo

fantastic upgrade for any rb 20 and 25!

huge response and great powerful turbo!

i ran this turbo on 16psi and got 260 rwkw on the neo 25, with usual mods, hit full boost at like 3250rmp :)

it is 15,000ks old, uses stock manfold, dump pipe, and cooler pipes.... great replacement for the stockie.

comes with all bolts, braided lines and oil drain, 12psi actuator (adjustable) this is completely ready to rock

$1500 plus postage

pick up in adelaide welcome or txt 0400099986

post-47249-0-03227200-1306759220_thumb.jpg

post-47249-0-23109000-1306759226_thumb.jpg

post-47249-0-54622900-1306759233_thumb.jpg

post-47249-0-33767800-1306759244_thumb.jpg

post-47249-0-66876300-1306759251_thumb.jpg

post-47249-0-91955200-1306759259_thumb.jpg

rb20/25 intercooler kit

AVARD brand, amazing quality no cutting req as it bolts from the side tanks to the chassis rails!.... no drilling cutting or ghettoness!

comes with all pipes clamps and brackets! $500 no bent fins too !!!

rb25 neo Seimens Deka injectors (top feed)

6 injecors

1x wiring loom (stock one, modded with new plugs)

2xrail spacers

all o rings etc

this will directly bolt up to your stock set up. nothing eles to worry about

$500

tein type CS coilovers

suit auto rs4 stagea (series 1 and 2)

32 wat dampner adj, heigh adj

comes with c spaners, some stickers from new, and the little dampner key.

also will include 10k old isc toe and camber arms

$850

PRICE DROP $800

post-47249-0-68509400-1306759987_thumb.jpg

post-47249-0-58085500-1306759996_thumb.jpg

Edited by chef_stagea

RETURNING TO STOCK!

All aftermarket parts for sale, Im not parting out the car only returning it to stock so if you see any aftermarket parts not listed just mention and I will grab a price.

Contact: 0401 404 104

ENGINE/POWER

- T3/T4 hi-flow turbo with VG30 exhaust housing, Comes with receipts for high flow. Currently making 252rwkw on 16 psi, If quick can be driven on the car.

$800

- Apexi Power FC, With hand controller. Comes with tune for Injectors/AFM/Turbo. $1300

- Turbo Back 3.5" Exhaust, straight through with twin 3" Stainless Steel pipes and built in Apexi Exhaust Valve Control. $650

- Z32 Air Flow Meter (Capable of 400rwkw) $200 (currently on hold)

- 550cc Aftermarket Injectors (Currently running at 77% injector cycle) $400 (currently on hold)

- Nismo Fuel Pressure Regulator $100

- Stainless Steel Intake Pipe $120

SUSPENSION

- TOP STOP Strut brace $150

- Rear Strut Brace $50

- Bilstein shocks with Whiteline Springs (Height Adjustable) $600

- Cusco Brake Stopper $60

INTERIOR

- Oil Temp, Blitz Gauge

- Oil Pressure, Blitz Gauge

- Boost pressure, Blitz Gauge $350 for all 3 gauges and senders

EXTERIOR

- DNA Wheels. 17x9 +30 all round $1100

SPARE PARTS

- JUN front bumper $150

- JUN Sideskirts $100

copyofsdc11928.jpg

copyofsdc11924.jpg

copyofsdc11926.jpg

enginecut.jpg

all up for sale I have:

1x pair stock R32 RB26 GTR manifolds $100 the pair

1x pair stock R32 Rb26 GTR turbo dump pipes $100 the pair.

1x 5-point clip-buckle harness, brand RCI. $50

1x r32 rb26 GTR oil pump, used but in good condition $50

1x r32 RB26 GTR harmonic balancer, in good condition (used) $80

1x oil catch can with mini pod-filter, brand new, $50

1x 3-guage holder set, new. $30

2x Q45 Air Flow Metres, Working condition, with plugs. $100 the pair, or $50 each

1x Z32 Air Flow Metre, working condition with plugs, $100

1x pair pod filters. Brand new never used. $50 the pair, or $30 each seperately

1x stock R32 RB26 GTR Intake pipwork, $50 the lot

1x stock R32 RB26 GTR coilpack cover blue, $100

1 x stock R32 RB26 GTR turbo two-into-one exhaust front pipe, good condition $50

1x 3" decat pipe with flex section, brand new never used $60

1x 3" twin barrel mid-muffler resonator section, brand new never used $80

1x full set Tein suspension to suit R32 GTS-T. Came out of four-door R32. Tein shocks/springs. In good condition $400

thanks. PM me and we'll arrange what you want, etc.

Offers considered

Also forgot to mention I have some 33 GTR rims with Toyo R888 Proxes which aren't very old!

taking reasonable offers now on everything but 25mm spacers, firm @ $100.

G-Tech

Injectors

Wheel studs

R32 disk brakes

etc.........

Well I've been offered $7900 as a trade in on my Stagea rs-4 1998 days edition. Refer to ad in general cars for sale.

If you can beat that offer, the car is yours. I'd really prefer it went to someone who wants one. 0421515816

Bride Low Max GIAS style (same as in pic) used in my 180 for a week and test fitted in my s15 so they are as new they are fiber glass witg black backs..... with power rails. $900 pair

bride material $100....about 1.2meters x 1.8meters

fake defi gauges new in box's never used, comes with all sensors, holders $250 for all 4

they look exactly the same as real defis

r34 rear 5 stud hubs, disks, calipers,pads, hand brake cables $300.

r34 gtt wheels with centre caps, 80% tread on 3 tires, the other has a puncture $400.

s13 sr20 5 bolt diff $40..

s15 weather shields $180 the pair

r34 4dr weather shields $100 for all 4

r34 gtt diff $100

r34 gtt power steering rack $100

located in mansfield pk s.a....pics will be up soon ....http://nissansilvia.com/forums/index.php?showtopic=493273

z32 afm sold

other stuff for sale

1x pair stock R32 RB26 GTR manifolds $100 the pair

1x pair stock R32 Rb26 GTR turbo dump pipes $100 the pair.

1x 5-point clip-buckle harness, brand RCI. $50

1x r32 rb26 GTR oil pump, used but in good condition $50

1x r32 RB26 GTR harmonic balancer, in good condition (used) $80

1x oil catch can with mini pod-filter, brand new, $50

1x 3-guage holder set, new. $30

2x Q45 Air Flow Metres, Working condition, with plugs. $100 the pair, or $50 each

1x pair pod filters. Brand new never used. $50 the pair, or $30 each seperately

1x stock R32 RB26 GTR Intake pipwork, $50 the lot

1x stock R32 RB26 GTR coilpack cover blue, $100

1 x stock R32 RB26 GTR turbo two-into-one exhaust front pipe, good condition $50

1x 3" decat pipe with flex section, brand new never used $60

1x 3" twin barrel mid-muffler resonator section, brand new never used $80

1x full set Tein suspension to suit R32 GTS-T. Came out of four-door R32. Tein shocks/springs. In good condition $400

WP_000069.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...