Jump to content
SAU Community

Recommended Posts

Have a new clutch slave cylinder for sale.

Bought new from Grand Nissan, fitted it then found out that's not actually the problem. Bought it for $120, will sell for $100.

Live in Sheidow park, delivery MAY be an option.

PM me for more details.

Joel.

R33 GTR rims with semi-slick Toyo R888 Proxes. (Couple of marks on the rims, tyre's approximately 70% tread left)

$2200

x6 R32, RB20DET injectors. (Working fine with no leaks when removed)

$25 ($5 each)

x4 R32 RB20DET disc's. (reasonable condition)

$30 ($10 each)

x2 16 & 17" tyres. ( just leagal)

$$$FREE$$$

G-Tech (As new)

$40

X-Treme Clutch-Heavy Duty to suit RB20DET (Condition unknown)

$30

Ash - 0488446696

R32 GT-R wheels with Toyo RE01-R 60% tread, good for track days

$800

R32 GT-R front brakes - Calipers, rotars, pads and lines included. Perfect for your R32 GTS-t, S13/S14.

$300 O.N.O

Will update with some photos when I can take some

Have a new clutch slave cylinder for sale.

Bought new from Grand Nissan, fitted it then found out that's not actually the problem. Bought it for $120, will sell for $100.

Live in Sheidow park, delivery MAY be an option.

PM me for more details.

Joel.

Was half dead at work when I posted this, forgot to mention it's for a s1 R33

For sale, 125cc Pit Bike, BRAND NEW ENGINE. Just put on, not even broken on. Hi-flow race carby, great condition pit bike. 1 down, 3 Up gearbox, all brand new. Looking for $800 cash, located in Stirling, Adelaide Hills.

Contact Via mobile phone, if no answer please txt as I am at uni during the day. 0432809975.

Cheers guys :)

Brand new R32 pair front guards

Fibreglass, Vented, oversized fender

$250 for the pair, pickup only from Morphett Vale

suit R32 GTR or GTST. simply fit to suit, and paint!

post-18854-0-23425300-1308625949_thumb.jpg

post-18854-0-71071900-1308625976_thumb.jpg

post-18854-0-45038400-1308626059_thumb.jpg

BUMP

$200 pickup

brand new never fitted

Up for sale!! These came off my series 2 r33.

post-55319-0-55580400-1309335492_thumb.jpg

post-55319-0-04011300-1309335520_thumb.jpg

TEIN Super Street Damper $600 O.N.O

post-55319-0-10792500-1309334956_thumb.jpg

post-55319-0-30178500-1309335033_thumb.jpg

Stock exhaust $100

post-55319-0-11062000-1309335206_thumb.jpg

Stock Cat $30

post-55319-0-74830300-1309335289_thumb.jpg

Spitfire coilpacks taken out of my series 2 r33. $300 o.n.o

Pm me if interested

Edited by kb-r33

R32/s13/180sx stock rear camber arms

R34 auto flywheel and torque converter

R34 starter motor

R34 throttle body

......R34 power sterring pump

R33 engine mounts

r32 passenger seat minta mspec

r32 half shafts

r32 rear 5 stud hubs

r32 boot linings

Extremely bare cut up S13 shell with all id tags and plates fs pm me not defected

parts are currently on the car but I'll start taking them off within the next few weeks

Splitfire coilpacks in rail - $450

Denso 440cc injectors on standard rail, guy replaced all o rings when I bought it, never fitted on my car sad.gif

- $450

Malpassi rising rate fpr - $150

Welded diff r33 4.11 i think, to fit r 32 just swap the rear hat on the housing - $150

Pair of lambo wheels 17x9.5+44 (can b reversed for mega dish) - $150 no shoes

R34 gtt turbo with elbow and actuator

etc no play great condition - 450

R33 elbow - 50

white East bear fibre bonnet plus flush bonnet pins- 500

Twin pipes straight through after cat, sounded ridonkulous on my rb20, 99db at 5000rpm with 3" dump straight through - 300

Metal intake pipe for flutters - 80

Decat pipe 3" 80

EEC boost controller withgauge hi lo setting with in car adjustability - 250

Really pains me to get rid of all the goodies But just can't afford to get defected with all These fines and shit

Will post pics and edit stuff when I get on a computer

0488 583 800 Jesse

Still for Sale:

* stock RB26dett Manifolds, Dump Pipes, Front 2-into-1 pipe, used harmonic balancer in excellent condition, used oil pump

$100 the lot, pickup only

* aftermarket fibreglass vented oversized Front Guards (front quarter panels), brand new, to suit R32

$200 pickup only from Morphett Vale

* 1x Apexi Multichecker display unit

$200 FIRM delivered via express post

"Monitors all various aspects of NISSAN vehicles using the diagnostic signal.

The Multi-Checker is a valuable diagnostic tool designed for most NISSAN fuel injected automobiles. The unit monitors and displays a wealth of information and is unmatched by any other similar diagnostic meter on the market today.

The unit displays vehicle speed and engine RPM both in real-time and peak hold modes. Injector pulse duty is displayed in percentages with a peak hold mode. The airflow percentage, ignition timing, horsepower display, torque display, and air-fuel ratio display add to its impressive list of functions.

The unit can also alert the driver to recommended up-shifting points and will sound an alarm as the air flow meter or injectors reach maximum capacity. A large, easy-to-read display clearly shows all functions and is back-lit in orange for easy nighttime visibility. The display can also be set to a bar graph mode for quick and efficient monitoring."

Vehicle Speed Display

RPM Diplay mode

Injector Valve Opening Ratio Display

Air Flow Meter Use Ratio Display

Ignition Timing Display

Power Display

Torque Display

Air/Fuel Display

Thanks, send me a PM if interested

For Sale

All items Brand New never used or fitted -

2 x Garrett GT2860R -5 Tubos $ 2500

18 x M8 x 1.25 Turbo Studs and Nuts for Garret Turbos $ 80

1 x Set of ARP Exhaust Maniflod Studs, Nuts and Washers for RB26DETT $ 160

1 x Genuine Nissan OEM Complete Engine Gasket Kit Set for RB26DETT R34 $220

1 x 1000Hp ATI Super Damper Crank Pulley (Part No. 917753) for R33 R34 RB26DETT $650

In Adelaide ready for pick up

Call me 0401 469 148

PRICE DROP

1: R32 "A" Piller mounted boost guage trim to suit 60mm guage $20 - $10ono

2: HKS Boost guage and loom (60mm) $50 - $40ono

3: Steel Mate 386M Remote Central Locking System (No Actuators came with kit) $50 - $40ono

4: 2x 5 stud 15mm Bolt On Spacers $100 FIRM - Need to sell spacers ASAP

5: R32 2door L&R boot trim $5 each (Left side has a crack at the flappy bit)-

Or take Boost guage and piller for $50.

Central locking kit was bought for my Daily but never got round to instaling it (Has never been used)

Boost guage will NOT come with vaccum pipe due to it being used for another guage. .

PRICE DROP ON MOST ITEMS

RB25det sump $35

R33 sr2 wing needs paint $30

GTR wing no end caps needs painting $180

R33 Air Conditioning Condenser gtst 1994 $40

R33 gtst sr1 front wiper motor $30

R33 gtst sr1 rear wiper motor $35

R33 gtst sr1 climate control $40

R33 gtst fuse box and cover $20

R33 gtst sr1 bonnet hinge set $15

R33 gtst overflow and washer bottle $25 for both

R33 GTST MANUAL ACCELERATOR/BRAKE/CLUTCH PEDAL SET $60

R33 gtst battery tray need painting $10

R33 manual gear shift boot/plate $20

RB25 R33 GTST SR1 CAS CAM ANGLE SENSOR AND BRACKET $50

R33 clutch master cylinder $30

R33 RB25 skyline power steering reservoir with lines $20

RB25det fuel rail $20

RB25det sr1 stock injectors all work fine but some have broken plasic ends but can replaced $20

R33 Air Conditioner Compressor with lines as seen in pic $60

RB25det sr1 aac valve $40

r33 gtst sr1 carbon bonnet $420

fiberglass vent (uncut vent) $60

rb25 turbo 45v2 has a blown seal $50

R33 gtst sr1 abs unit and bracket $65

R33 gtr intercooler (corrosion on bottom)$40

Rb25det sr1 flywheel $40

R33 gtst coupe sr1 door handle's $35

R31 sr3 grill $10

R31 sr3 bits lot $15

R33 rb25 engine mount brackets(mounts are rooted as seen in pic)$30

R33 gtst light garnish $30

R33 centre interior light plus other? $25

R33 sr1 eyelids(they need prep work before paint) $15

Pics http://www.skylinesaustralia.com/forums/topic/364044-shed-clean-out/

pm me or 0435888239

Will post at buyers expense

Dave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...