Jump to content
SAU Community

Recommended Posts

- r33 gtst Rubber intake pipe with oil breather apparatus $35

- r33 gtst Stock dump pipe $20

- r33 gtst Stock dump & front pipe $30

- r33 gtst Oxygen sensor $40

- r33 gtst Air Con fan $35

- r33 gtst Stock Intercooler + Pipes $65

- r33 gtst Series 2 coil pack loom $40

- r33 gtst Alternator $60

- r33 gtst 2nd hand water pump works fine $35

- r33 gtst Timing belt $30

- r33 gtst Bosch Air con, power steering, alternator belts brand new $70

- Garrett Adjustable Actuator with bracket 15psi ( New) $70

post-31991-0-00191800-1312509850_thumb.jpgpost-31991-0-47424700-1312510002_thumb.jpgpost-31991-0-65943700-1312510039_thumb.jpgpost-31991-0-40924900-1312510062_thumb.jpgpost-31991-0-23302700-1312510069_thumb.jpgpost-31991-0-69927800-1312510096_thumb.jpgpost-31991-0-38416300-1312510119_thumb.jpg

EOI: 17x9(i think, might be 8's) Drift R rims, 5x114.3 full set, near new tyres on rear and ok condition tyres on front. Slight gutter rash, good condition otheriwse. $800 ono.

post-23851-0-64934200-1312517954_thumb.jpg

R33 plazmaman intake plenum.

Comes with plenum, bottom half to head, vacume fittings. All you need is to bolt your throttle body onto it and your idle control valve.

$950

Rb25 hiflow 740cc injectors. Run 380rwkw

Come with rail

$450

R33 plazmaman intake plenum.

Comes with plenum, bottom half to head, vacume fittings. All you need is to bolt your throttle body onto it and your idle control valve.

$950

Rb25 hiflow 740cc injectors. Run 380rwkw

Come with rail

$450

OK... is there a adjusted price if both are taken and if you have flow results for the injectors and have they have been run together(plenum+rail+injectors)? Plus receipts for the plenum, etc? Basically a EOI from me ATM.(no guarantee's)

(looking to change my setup soon and these kind of things will be needed, post pics if you have them)

Cheers,

Shannon

Hey Shannon.

Can arrange a package.

I'm in Sydney atm so no pics.

I don't have the reciept but I bought the manifold new and its painted black.

The injectors I got hiflowed from a member on here. The have been flowing good numbers for a year now.

Txt me. 0433290801

For Sale.

Set of excellent condition G4 Racing coilovers for R33 GTR, anodised blue in colour, bought these for my z32 as was told that they would fit, rears dont so there up for sale

chasing $700 firm

also comes with 2 Laser cut 5mm steel C-spanners i had made at work.

PM or Sms on 0424521315.

pics via sms

Bump.

180SX

L&RH DOOR LATCH INSERTS $ 15

2X REAR SEATBELT LATCHES $10

HANDBRAKE COVER $15

1X RANDOM SMALL VENT $5

FUSEBOX COVER - SLIGHT HOLE $5

LEFT FOOT REST $5

1X FUSE OVER $10

FLEXI GEAR BOOT $10

L&RH MIRRORS - DRIVERS SIDE MISSING GLASS

DRIVERS PLASTIC DOOR MOULD

2 SETS 180SX TAILLIGHT GARNISHES

L&RH WIPERS

1X GEARBOX MOUNT steel minus rubber $40

BLACK GOOD PAINT DRIVERS DOOR 150 (incl glass latch and power motor)

BRAKE BOSSTER

L&RH PILLAR TRIM

MINT WHITE REAR HATCH $150

PASSANGER 180SX REAR WINDOW

REAR CAMBER ARMS $50

CA LOOM

MINT BONNET WHITE $160

GEARBOX HARD CHASSIR RUBBER COVER

CHAROOL CANISTER

L&RH TOP FRONT SEAT TRIM

UPPER DOOR PLASTIC INTIRIOUR MOULDS

L&RH SIDE PEAR LOWER TRIM

GOOD SHELL STRAIGHT FROM FRONT SHOCK MOUNTS BACK can be sold with front cut t use for repair $400 with the front cut

R34

POWERSTEARING PUMP $80

AUTO CONVERTER $50

AUTO STARTER MOTER $80

R32 CLUTCH SLAVE

R33 STEARING COLLUM

PLz pm offer on anything u need dont have time to go throught it all and find out what its worth

cheers

1: R32 "A" Piller mounted boost guage trim to suit 60mm guage $10ono

2: HKS Boost guage and loom (60mm) $40ono

3: Steel Mate 386M Remote Central Locking System (No Actuators came with kit) $40ono

4: 2x 5 stud 15mm Hubcentric Bolt On Spacers $100 FIRM - Need to sell spacers ASAP

5: R32 2door L&R boot trim $5 each (Has holes cut out for strut brace)

Or take Boost guage and piller for $50.

Central locking kit was bought for my Daily but never got round to instaling it (Has never been used)

Boost guage will NOT come with vaccum pipe due to it being used for another guage.

Few parts bits and pieces:

RB25 POWER FC, with hand controller: $1150

LEFT TO RIGHT:

R32 $120

R34 $250

R32 $120

S13/180sx $120

R32 $120

sdc12352n.jpg

sdc12355m.jpg

JUN Front bumper $100

sdc12361.jpg

JUN Sideskirts $100

sdc12356q.jpg

are those side skirts for the R34 GTT?

fs

r31 silouette shell roling wired for rb25det

front coilovers

rear is aftermarket shocks and springs very stiff

boost and temp guage sparco

new 2.5 " exaust system

s13 lcas

s13 knuckles

Garage 7 tie rod ends

Lock spacers

huge front sway bar

all bushes been replaed withn noalthane

all lights work

sr20det front brakes

new pads and rotors allround calipers rebuilt

freshly shimmed diff comes wit spare wellded centre and axels

no plates track only.

built for missus she slid once at drift school did great job i have also slid this car and handled awesome very easy to steer very good car for a grass roots drifter had no troubles with it

1800 ono only missing engine and trans sold on 31 silouete stockys

post-77561-0-71221300-1312789267_thumb.jpg

Thrust bearing to suit pull type clutch for GT-R

0fa1bf73.jpg

Bought it the other day from Just Jap, only to realize I had one supplied with my replacement clutch..

$50 if someone wants it, I can bring to dyno day this weekend if not I'll use it for my next clutch haha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...