Jump to content
SAU Community

Recommended Posts

I have 3 r32 gtr injectors for sale. 444cc injectors that have been cleaned and flow tested and all seals replaced. I had to replace one of my injectors so I bought a set of 6 and had all 11 good injectors cleaned and flow tested and all seals replaced. I have sold 2 of my spares now leaving these last 3. Make me an offer. Located in west beach SA. Happy to post at buyers expense. Can't upload photos from my phone. Happy to text photos if required.

Text me please as I am slow replying to pm's.

My name is Sam, mobile number is 0431398657.

Got some furniture for sale - ALL ITEMS brand new un-used sealed in it's box un-assembled. Prices are firm.

TV STAND - dimensions are Wx180 x Dx58 x Hx26cm - $200

427075_2952712130775_1050551866_32547859_1969468848_n.jpg

Brand new wardrobe - ACTUAL COLOUR IS A DARK BROWN WOOD TEXTURE LIKE THE REST OF THE GEAR - $160 firm

Materials: High Density Thick Laminate

Features:

Impact-Resistant Edging

Stylish Aluminum Bow Doors Handles.

Four Shelves

Hanging Space

Kickboard below

Unit Dimensions W X D X H : 800 x 450 x 1800 mm

429138_2952693730315_1050551866_32547857_1794567944_n.jpg

Bedside table - dimensions are Lx48 x Wx35 x Hx42cm

398536_2952677049898_1050551866_32547855_962197246_n.jpg

Coffee table - dimensions in picture - $SOLD

421083_2952668049673_1050551866_32547852_51694264_n.jpg

Up For sale is my XBOX 360 ( 120 GIGS ) Will not Separate, Selling the Whole thing as it is.

2 Controller

Power cable

Video in cable

Here are the list of 22 games

(super) Street fighter IV

Final Fantasy XIII

Call of duty Black OPS

Need for speed undercover

Fallout 3

Splinter cell double agent

Spiderman 3

Saints Row 2

F.E.A.R 2 ( project Origin )

NFL Tour

HALO 3

Darksiders

Deadrising

Call of duty ( Modern warfare 2)

Devil may cry 4

MASS Effect

FORZA motorsport 3

Aliens vs Predator

Red Faction guerrilla

FIFA 07

Lego Batman

Alone in the dark

( $400 ) post-55319-0-98857700-1329721031_thumb.jpg post-55319-0-16705600-1329721043_thumb.jpg

PM ME AND I'LL GET BACK TO U.

straight piping 4 inch cat back exhaust 5 inch cannon (off a 33) - $100

r33 complete doors (minus window switch) in white, no dents or anything. $100 each $150 for both

r33 gtr carbon fibre front grill brand new $75

nismo steering wheel with boss kit $75

wakeskate $125

sub - sold

bodykit - sold

i would of said iPhone users but lets not start that war ;)

i have no dramas with my Android phone

EDIT i have more drama's with PC/Firefox note sure if same issues are had with IE but i know IE you cant properly get to your profile

i would of said iPhone users but lets not start that war ;)

i have no dramas with my Android phone

EDIT i have more drama's with PC/Firefox note sure if same issues are had with IE but i know IE you cant properly get to your profile

Baited. Quickest bite everrrrr :nyaanyaa:

Selling this awesome deal as I work 2 jobs and I get one day off per fortnight.

Package deal includes the following for 10 people!!

~ free equipment hire

~ free bbq lunch

~ free 200 paint balls for the organiser

~ free 100 paint balls for each player

~ 10 to 12 games.

Voucher expires 07/04/2012

I can mms pics of voucher. Please sms interest to me as can't answer phone at work

WORK Wheels

17" x 9" +20 all round (GTR off set)

Tyres:

F: 95% Fedral 595 235/45/17

R: 80% Fedral 595 235/45/17

Condition: A few marks on the red lip, no cracks, no buckles, extremely light.

Price: $1000

Will Swap For:

Bride Seats

Sparco Seats

R32 Aftermarket Front Knuckles

R32 Origin Sideskirts

R32 Standard Front Bumper In White

imgp301211.jpg

2130bc0_20.jpeg

234182d_20.jpeg

3232n21_20.jpeg

6968cd5_20.jpeg

Photos for some reason make the red look really bright, look better in person.

Edited by JiN_MaN

Pair of Sparco white reclining seats.

Been in storage, covered for 10ish months, bought but never used.

Perfect condition apart from one tiny puncture mark on the side one of them (pictured)

Does not come with rails.

$800 the pair

Call/sms Adam on 0431 274 163

Still got goodies left

R32 GTR PowerFC + hand controller

$800

R34 GTR PowerFC D-Jetro + hand controller

no MAP sensor kit, as new condition (plugged in, tested, re-packaged)

$950

Blitz Dual SBC boost controller.

The whole deal (dual solenoids, all the vac lines you should need, wiring and unit)

$300

Plus adding to it

4x R34 GTR wheels with centre caps

1 wheel has a tiny bit of rash (not done by me, but by previous owner), otherwise really good condition

Will not be coming with tyres

$1200

Pics able to be supplied on request

Contact via PM

Set of 4 265/35/18 MaxiGrade Japanese Made Tyres 90% tread - bargain $ 60

2 275/35/18 Toyo T1R with 20% tread no camber wear .........FREEBIE

CONTACT VIA PM .........CHEERS

Edited by NISSAN GTR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...