Jump to content
SAU Community

Recommended Posts

AutoMeter silver face pro comp mechanical boost gauge (66.7mm).

Given to me by a mate & never installed, sitting in its original box.

$60 (gauge only, no vacuum line, t pieces or mounting bits are included)

post-16018-0-93549400-1333349924_thumb.jpg

PM if interested

cheers

got some stuff for sale guys as my gearbox is on the verge of death now, so trying to free up some dollars for that.

Just jap dump pipe, suits R34. bought last week and has been on the car for all of 3 days. has just gotten that slight golden tinge stainless goes when hot. - $180

Just jap decat w/ gaskets, suits R34. - $50

Pioneer DEH-1350MPG stereo, bought to get the aussie station realised ive never really used it. comes with nissan -> iso -> pioneer wiring so no cutting/soldering required, can also throw in din pocket - $120 ono

Trust gearknob, not a scratch on it, just sits ontop of my busted gearbox :/ - $40 ono

Turbotech manual boost controller, was fitted for about a week until i swapped it out for an rb20 actuator - $25

and the LEFT weathershield from my 34 2 door, comes with all clips - $15 ono

can be contacted on 0433 987 945 or by pm

cheers ben

post-89886-0-50060900-1333354754_thumb.jpg

post-89886-0-39043800-1333354819_thumb.jpg

post-89886-0-53066600-1333354933_thumb.jpg

post-89886-0-69457000-1333354981_thumb.jpg

Anyone want a bent (looks like a failed flare job) RHF R32 GTR guard in Gunmetal Grey for $30ono, guard is bent due to having the wheel fall of the car and get cought in the guard before it flew out. My step dad wants it gone as it's taking up room in the shed. The wheel in the picture is an 18X8.5 unsure offest. PM or txt on 0433 522 234

post-62269-0-66671200-1333355877_thumb.jpg

hey guys up for sale i have a mint r32 series 2 steering wheel never seen another one like it its got a leather horn button unlike the usual standard one with the clear plastic coated one $150 firm pm me or text me on if interested 0421675373

cheers BEN.

pics upon request via text cheers

Edited by BENDERS32

hey guys up for sale i have a mint r32 series 2 steering wheel never seen another one like it its got a leather horn button unlike the usual standard one with the clear plastic coated one $150 firm pm me or text me on if interested 0421675373

cheers BEN.

pics upon request via text cheers

then its not series 2

then its not series 2

and that actually does make a big diff - the hicas magnets/sensor points are located in different positions. I was scratching my head for months till someone here told me about it. swapped the boss kit I had with a stock wheel and magically, I had hicas.

Cool story eh?

-D

and that actually does make a big diff - the hicas magnets/sensor points are located in different positions. I was scratching my head for months till someone here told me about it. swapped the boss kit I had with a stock wheel and magically, I had hicas.

Cool story eh?

-D

i like it laugh.gif

R34.

1998.

Turbo, Manual.

106k clock.

Blitz cooler,

Power FC,

Blitz EBC 14 pound.

Oil Cooler,

HKS pod.

exhaust

17" Jap wheels.

Welded diff, which some ppl take a while to get used to.

Only ever driven to work, never on cruises or circuits etc.

Bit of a waste in me owning, Really after a decent 4x4 with lift kit etc.

Just serviced, Oil, New belts, New brake pads

15k Firm. Cheap.

post-45384-0-37245600-1333437639_thumb.jpg

post-45384-0-09366800-1333437660_thumb.jpg

got some stuff for sale guys as my gearbox is on the verge of death now, so trying to free up some dollars for that.

Just jap dump pipe, suits R34. bought last week and has been on the car for all of 3 days. has just gotten that slight golden tinge stainless goes when hot. - $180

Just jap decat w/ gaskets, suits R34. - $50

Pioneer DEH-1350MPG stereo, bought to get the aussie station realised ive never really used it. comes with nissan -> iso -> pioneer wiring so no cutting/soldering required, can also throw in din pocket - $120 ono

Trust gearknob, not a scratch on it, just sits ontop of my busted gearbox :/ - $40 ono

Turbotech manual boost controller, was fitted for about a week until i swapped it out for an rb20 actuator - $25

and the LEFT weathershield from my 34 2 door, comes with all clips - $15 ono

can be contacted on 0433 987 945 or by pm

cheers ben

Do you kno if that decat pipe would fit on a r33 ? if so ill take it

For sale Brother MFC 9210. Home office printer. In excellent condition was a $1000 new selling for $250. Great for someone starting up a home office or allready has one.

Phone Brad 0427999093. Located near Parafield airport

post-52024-0-87103200-1333574574_thumb.jpg

Got a Brand new car entertainment/navigation system, bought it a week ago, arrived today however doesnt fit in my toyota dash (screen too wide) :(

Specs:

2-Din 6.2-Inch TFT LCD Touch Screen HD digital panel ( 800*480)

USB AND SD Interface

Compatible With DivX/DVD/VCD/CD/CD-R,RW/MP3/MP4

Built-in Digital TV Tuner

Built-in AM/FM Stereo Receiver

BUILT-IN GPS navigation

BLUETOOTH

IPOD ready

Radio With 18FM & 12AM Pres

Sowx4 Max

Rear Monitor video output

TFI high definnition IN-Dash LCD

Full function remote control

Automatic PAL/NTSC,wide application range,highly compatiable.

Few video inputs/outputs

Paid $450, yours for $400 need it gone asap.

comes with everything, gps antenna, ipod cable, usb cable etc. Still in box, only inspected and measured.

post-32258-0-20550800-1333616530_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...