Jump to content
SAU Community

Recommended Posts

R32 GTST side pipe, 3" lobster backed mild steel side pipe fitted with a 5" resonator

bolts to the back of the front pipe (ie no cat)

used for 1 hillclimb but now the owner is selling the car

$120 ono

http://www.facebook....955841771 for video of the side pipe

post-70848-0-67590600-1340687403_thumb.jpg

post-70848-0-53881000-1340687476_thumb.jpg

for the pipe in action

post-70848-0-30380800-1340687521_thumb.jpg

Rb25det motor,

s1 r33, no turbo, no intake manifold, no injectors

gates racing belt done 15,000kms ago with pulleys and seals

compression 145-160 on all 6 cylinders

comes with loom and ecu also

Make me an offer. Need it gone now.

For sale

R33 REAR BOOT LID fits S1 and S2

fits 2 door only.

Excellent condition, no dents, no scratches. White in colour.

$150

RB gearbox mount brackets from the motor to hold the gearbox on $50

RB25 coilpack cover $30

RB25 top cover to cover timing belt and bottom cover $60

R33 gtst S1 coilpack loom 1 & 4 plug clip is broken but still works $45

R34 Gtt Injectors loom $50

R34 air con and power steering pump bracket $30

R34 heater hose that run behind the motor $30

R34 Engine mount brackets $50

R34 tube that sits under the plenum think its for water $15

RB25det stock turbo coolant line $15

R33 GTST Factory Air Intake Pipe $30

R34 harmonic balancer $50

Plz PM only thanks

will post anywhere in AUS .. pick up from Adelaide south

post-81807-0-92115500-1337572258_thumb.jpgpost-81807-0-27229200-1337572282_thumb.jpg

Edited by MAD R33

3x60mm Shadow Pro gauges

Oil temp, water temp and oil pressure.

- Stepping Motor Type

- Peak Recall Option

- Warning Light

- Clear Face

- Silver Surround

were on the car for almost a year, only removed for a Defi set up. Come with the cups, stand etc

same as these

http://justjap.com/store/home.php?cat=503

$250

Josh

0411742212

Got my R33 S2 front bar up for sale, Has the bottom lip and comes with indicator/fog lights. Has 1 crack on the bottom lip and there is some visible silicone the body repairer used to hold the lip on but its not too noticeable (see pics). Paint is good, the car is filthy in the pics.

$350ono

0425151620

SOLD

for sale

i have a set of cusco springs out of a r33 front and rears on one of the sets its says 4.5k and cant read the stickers on the other set as been scratched a bit these come out of my sons skyline but were pretty stiff for the road maybe great for a drift car or track car

$100 bucks for the set

a pair of potenza 17 inch have a bit of tread left some minor caster wear good skid tyres or maybe even just to get ya out of the poo till you can afford new ones 50 bucks the pair ono.

email dean at [email protected]

cheers dean

up for sale is my old stainless steel RSR 3" cat back exhaust to suit r33 GTst or GTR. has the rsr mid muffler leading to twin 4" AM performance rear mufflers. looks and sounds awesome.

heres a pic of how it sits

HZryq.jpg

Josh

0411742212

$500

For Sale:

1: R32 GTR Mid Pipe "ONLY" Mild Steel. 3" at front and 3 1/2" to rear muffler. Has never been fitted to my car, came off RBWARE when it was first purchased. Wouldn't have a clue what they're worth so we'll say $80ono

2: R32 GTR Super Cat Performance rear muffler, sounded awsome. 3" inlet with 4"-4 1/2" outlet I think. $80ono

3: Imitation Ganador Mirrors to suit R32 in Black, only been test fitted to my GTST and fitted fine. $60ono

4: 180sx tail lights $80ono

5: 180sx bonnet latch $30ono

6: 180sx SR20det compressor housing outlet pipe $30

7: 180sx Glass Headlights with H4 globes $50ono

8: 180sx bonnet hindges $30ono

9: 180sx centre air vents $20ono

10: 180sx A/C controls $40ono

11: 180sx SR20det fuel pump $40ono

12: 180sx SR20det oil cap $10ono

13: Steel Mate 386M Central Locking Kit. Has never been used and does not come with door actuators. $40ono

14: R32 2 door boot trim both sides $15

More pictures can be found in my "Stuff For Sale" Album on Facebook or TXT me on 0433 522 234 for more info and pics.

http://www.facebook....42283591&type=1

post-62269-0-38350900-1341148213_thumb.jpg

post-62269-0-33414500-1341148250_thumb.jpg

post-62269-0-78674300-1341148327_thumb.jpg

post-62269-0-02695400-1341148384_thumb.jpg

post-62269-0-23779900-1341148485_thumb.jpg

selling my R32 skyline, RB20DE non-turbo.

ive had it a few months

the good:

the cars done 260,000, buts engine and gear box has done LESS then 150,000(last owner replaced them)

no dash cracks or bubbles

new tyres!

new timing belt, new water pump, new air box, new oil and fuel filters.

major service last month

wheel alignment done

coolant and oils flushed!

new reinforcement bar(rare)

good cd -player and speakers

good spare tyre(new)

great a/c

repalced tie-rods, boots and bushes!

ive spent as much as this cars worth!!!!

only used 98 octane!

its DEAD STOCK! (exepct rims and a cd player)

i drove this car to Port Pirie and didnt miss a beat, no over heating no warning lights NOTHING.

bad:

needs a front bumper (was dropped a damaged badly)

dent in hood

one air vent missing (very very common)

this car only needs a stock front bumper and its ready to go. i just cant afford it anymore. i need to sell this car to pay my debts. i hate to do it.

0435918142 andrew

he wants 6k

anyway, i am selling my daily so i can buy a car suitable for towing , have a car lined up already

1991 corolla hatchback

3 months rego as of june 25th

so cheap to run - 8 litres per 100ks

tyres have heaps of tread

full service and receipt history since it was bought from the dealership

all electrics work, air con and heater work, no gearbox crunches/issues

engine is strong and healthy

never had an issue in the year ive owned it

all ready to go for a cheap as daily

2500 ono

PM or text 0421549607 for more details and to get pictures etc.

For sale rx4 4 door/ 929 coupe package deal

$8500 ono

1974 rx4 4door flat nose model

The good.

Mark mills built 13bt mild port

s6 rotors 2mm scr seals

s5 turbo

microtech lt 10

Bosch coil pack

3"dump ,exhaust hooker muffler

PWR radiator

PWR intercooler

spl thermo

s4 gear box /rx4 bell housing H/D organic clutch

bosch 044 carter pre pump and surge tank

also comes with 700cc sard injectors not in car

16" wantabee rims

car made around 185rwkw on 6-8 psi engine has done less than 10000 since rebuilt and never boosted

the bad the body is very rusty and bog wiped but still registred and defect free

Thee good complete 929 coupe rolling shell just minus engine has rx4 flat nose front end conversion in primer very straight boyh cars as i bought them very sad to see them go but baby n.o. 3 on the way not much time for so many projects.

So some of them have to go i suppose.pls pm can txt pics

2 x used Bridgestone Potenza Re55 Semi Slicks for sale 235/17/45 rrp $500+ each

1 has slight camber wear but still plenty of track life in these tyres, plan was to use them on the track day but didnt end up chucking them on, would probably last a couple of track days

$400 for pair, pm me

post-72541-0-97697600-1334883008_thumb.jpg

post-72541-0-92343900-1334883009_thumb.jpg

Anyone want them, would be good for drags/track 300 ono

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...