Jump to content
SAU Community

Recommended Posts

350Z aftermarket front bar.

not needed, 300 dollars

http://www.gumtree.c...lack/1004761098

linky ^^

would post photos but my computer for some reason wont allow.

not needed due to not fitting it on the car.

txt me on 0422360999 or pm me but txt prefered

Edited by buzz350

sad day

http://www.skylinesaustralia.com/forums/topic/405666-1996-black-ecr33-sa-300-rwkw-one-of-a-kind/page__pid__6461441#entry6461441

have available seperately

GTR interior

whiteline swaybars

kazama castor rods

whiteline rear camber arms

defi 60mm gauges

shadow 60mm gauges

greddy/trust oil cooler and relocator

4" titanium exhaust

Titanium strut brace, still not 100 on both Ti items but ill take interest in them

hey all got set of quality jap wheels for sale 17x9.5 +15 all round KT designed by Keiichi Tsuchiya "drift king" .. they have been sitting in a garage for about 6 years (away from rain etc) got some tires with good tread.. i dont know for what price these sell but throw me some offers and im in no rush or no need to sell them so no lowballing please :P

location: Athelstone

contact me on 0415440332 prefer txt

post-87705-0-95020100-1343311236_thumb.jpg

post-87705-0-91425700-1343311252_thumb.jpg

hey all got set of quality jap wheels for sale 17x9.5 +15 all round KT designed by Keiichi Tsuchiya "drift king" .. they have been sitting in a garage for about 6 years (away from rain etc) got some tires with good tread.. i dont know for what price these sell but throw me some offers and im in no rush or no need to sell them so no lowballing please :P

location: Athelstone

contact me on 0415440332 prefer txt

Rules are to put the price so lets say $1000 ono

FS

Sparco Sprint V seat + Bride lo-max rail (passenger side) for R32 (think it says A31 on the rail too)

Seat has had minimal to no use, same as rail.

Will check the date, but the seat has 6 good years left date wise (early 2009 purchase, 2008 dated seat)

$400 for seat + rail

Will consider swap for an in-date FIA stickered wider (say a +1 or +2 wider) seat. No reclining seats

Contact via PM

(pics up in the morning, currently in the car)

1. r33 s2 diff, manual tailshaft and complete rear brake setup - $300 need it gone asap

2. s2 both doors with glass/mirrors trim

boot lid with lock and s2 spoiler

mspec side skirts

right hand guard

brake lights with covers

rear bumper

s2 dash

$600 the lot

PM me

Stainless steel top mount manifold suit rb20/25 with 2 bolt 38mm wastegate flange (BRAND NEW) $200

Stainless steel top mount manifold suit rb20/25 with 4 bolt 50mm wastegate flange (USED) $200

MTX jackhammer 12" 250wrms in ported box $100

kicker 400wrms mono block amp $100

standard rb25 turbo $125

standard S1 RB25DET coil-packs $30

50mm external wastegate (4 bolt flange) $40

intercooler piping suit rb25 with standard position turbo and crossover $50

2x 14" 4x100 steelies with good tread suit honda $30

Open to offers guys, need this stuff gone. All in good working order.

Pics on request.

PM if you're interested or txt me on 0425366582 :) cheers

Selling my Water Intercooler kit as shown in this thread - http://www.skylinesa...05#entry5927305.

The kit in question is this one - http://www.frozenboo...6161710e43dad20

Cost me about $600 for everything, however the front mounted radiator component was punctured so i've taken the opportunity to go back to a factory side mount cooler and start returning the car to stock in preparation for an upgrade later this year. :) So the buyer would need to source a new radiator or attempt a repair (unlikely I think, I already had a go unsuccessfully). You could grab a cheap small radiator from a wrecker and you'd be ready to rock and roll.

If you're thinking of entering the world of water intercooling I highly recommend it! All of the benefits of a big front mount cooler without the intake lag that comes with it.

Everything in the link above is included + hoses, fittings and custom mounting hardware to suit an R33.

$200 for the lot.

Some aftermarket parts to sale, and offering to fellow South Aussies first before throwing on the general board. These seem to be the going prices but open to reasonable offers if you can show me a cheaper price on the board :)

R33 RB25DET PowerFC & Hand controller - $1150

6x Side feed Nismo 555cc injectors (yellow top). Pintle caps are all intact. $450

If you want both I'll do a combined price of $1500. Also after a stock R33 GTST turbo so would be happy to give some $$$ off in trade if anyone has one.

PowerFC is gone! Price reduced-

Water/Air Intercooler kit - $150 firm.

Nismo 555cc Injectors - $400 firm.

Also selling a stealth spoiler/duck lip spoiler in white - looks identical to this - $100.

Edited by Ionos

have a set of standard 16 inch 33 gtst rims

great condition, hardly any rash with

4 very new 225 wide tires fitted.

$500 ONO

Also have a standard SMIC and plumbing,

$25 ono

A standard dump pipe, its very heavy and would hurt if you hit

someone over the head with it

$10 ono

PowerFC is gone! Price reduced-

Water/Air Intercooler kit - $150 firm.

Nismo 555cc Injectors - $400 firm.

Also selling a stealth spoiler/duck lip spoiler in white - looks identical to this - $100.

PM'd :thumbsup:

R33 gts, gts-t gtr cooling panel (full size) - $150

R33 gtst rear camber arms - $80

Sparco sprint (blue) with r33/r32/a31 rail (barely used, as new) - $650

AM Performance split system exhaust fits r33 gts-t/gtr with decat pipe - $850

Pics:

th_2011-09-22143013-1.jpg th_camberarms1.jpg th_IMAG0533.jpg th_IMAG0581-1.jpg

Edited by SkyHi_33

I Have recently written of my 34 4 door gtt,.. I have purchased a gt and swapped my manual trans and engine from gtt and put into gt shell, so I have a combination of parts available from gtt and gt. series 1 (1998, 2000 models)

ITEMS NOT AVAILABLE ARE:

MOTOR, MANUAL BOX AND TAILSHAFT, CLUTCH PEDAL/CYLINDER, BRAKES/HUBS, and various other bits that have aready been sold.

All items are located in Adelaide hills (pickup preffered) can post at buyers expense, but will have to bear with me, I work two jobs and it can take a few days to pack and get to a post office due to this. I am open to reasonable offers and prices are not 100% firm, but please no low ball offers, time wasters AND IN THE SAKE OF KEEPING THIS THREAD CLEAN PM ME, OR EVEN BETTER SEND ME AN SMS OR PHONE CALL FOR A PROMT REPLY!!! I AM IN NO HURRY TO SELL ALL THIS< JUST THOUGHT TO START CLEARING BITS OUT SO PLEASE DO NOT WASTE Y TIME WITH STUPID OFFERS OR SAY YOU WILL PURCHASE OR COME UP AND THEN NEVER FOLLOW THROUGH- I AM VERY BUSY AND DONT NEED HASSLERS. THANKS :)

GT Air box with Snorkel $40

Gt Automatic gear box with tailshaft $200

GTT Airconditioner Compressor $100

GT/GTT/GTR headlights pair $400

RHS fender $150

2 x LHS Fenders (both have a small lip on the edge from tyres nothing major) $150 each

Bonnet (has several hail damage dints, would most probably need to be resprayed by new owner and remvig them would be an easy and cheap job) $180

GT front bar $150

Pair of GTT headlight Brackets $20

Pair of GTR headlight backets (needed for GTR front end conversion) $150

GT bonnet catch support $20

GTR bonnet catch support(needed for GTR front end conversion) $100

GTR bonnet hinges (both slightly bent from accident- id imagine a hammer and a vice and all back to normal- make an offer)

GT front reinforcement bar $80

pair of frot bar orange indicators $40

Pair of fender orange indicators$10

ABS Unit $150

Carbon canister $20

GT Dash (No Vents) $50

GT Auto dash Custer (just cicked over 100,000 kms) $80

Carpet $80

Seatbelt (set of 5 with rear buckles)$100

Door locks and ignition barrell with key- have lock box also if required for remote key) $100

Drivers door $150

Drivers door card (speaker painted silver and handle surround) $20

Passenger door$150

Passenger door card (speaker painted silver and and handle) $20

LHS Rear door card $20

LHS Rear door glass $40

LHS Rear door window switch $10

RHS Reah door card (painted handle silver $20

RHS Rear window switch $10

RHS Rear door $150

Drivers door window/mirror switches, (painted silver) $40

Passenger door window switch (painted silver)$20

Sunvisor pair $20

Parcel shelf $20

Roof lining $40

Boot lid with spoiler holes$100

Spoiler $50

Boot carpet $20

Space saver rim $40

Boot lining $50

Drivers scuff panel $20

Passenger scuff panel $20

RHS Rear scuff Panel $20

LHS Rear scuff panel $20

A Pillars pair (re fabricated) $20

B Pillars Pair $20

C Pillars Pair$20

Pair of what i beleive is the fogdriving lights that sit next to the indicators in some gtt front bars $50

RB25DET injectors (115,000 km old) make an offer

RHS Tail light $100

LHS tail light $100

Rear bumer (minor mark will come out with respray) $150

Series 2 factory plastic rear pods $200

Series 2 Factory plastic side skirts $200

Weather shied set $100 slight damage to one

Rear windscreen $100

Tripple gauge cluster (gauges only) $40

Hicas computer make an offer

Hicas unit $50

Heater $100

Roof handles set $20

Front steering rack- with crossember and sway bar $300

rear subframe (yet to remove)

Diff (has the one ABS sensor- not the one with two sensors $250

Handbrake with cable $80

SRS control box, make an offer

Steering wheel with airbag GT auto (some wear) $150

RHS Lower Control arm $50

LHS Lower Control arm $50

RHS castor arm $40

LHS castor arm $40

GTT dump pipe make an offer

Nismo exhaust (think its a 2 1/4" il have to check) cat back(knocked out cat)suit N/A $350

Rear seat $150

Front seat pair-no seat belt buckles (will sell once they have been dry cleaned to remove some grime- should be done in a week or two) $300

rear reinforcement bar$100

body loom make an offer

headight loom make an offer

inside fuse box $10

fuel flap $20

GTR ( the small reo bar that attactches to the headlight brackets and sits under where the top of the bumper goes) $40

GTT (the same bit as above but GTT)$20

GTR ( plastic strip with rubber on it that sits on top of gtr bumper $40

GTT below headlight brackets (pair) $50

GT NEO engine cover $10

GT fuel pump make an offer

GTT brake master cylinder and booster $150

mat set $80

have a gtr front bar thats been damaged in accident (make an offer) can mms pics repairable

Aftermarket rear adjustable upper arms - unsure of brand $50

Hicas lock bar (unsure of brand) $40

There is probably bits I have missed feel free to ask away- have sold a lot of interior bits hence not listed.

have various bits,like control boxes etc under dash, looms, bits n pieces, various brackets...ask away.

SHELL IS WRITTEN OFF and at this stage has a home.

Contact me via sms/phone please if possible 0419837474

Cannot be bothered uploding a pic of every part in here so can email and mms pics if required.

FOR SALE

Nismo Front Camber Arms to suit R32

bushes are in good condition , some of silver paint is coming off.

Non Adjustable type. but have the stiffer Nismo bushes

The bushes in these are stiffer than standard

quick sale $70 NOW $50

will freight Aust wide (extra)

These are over $500 new from nismo

Same as arms in this link http://www.rhdjapan....yline-r32-51945

pick up Tee Tree Gully area

0422444532

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...