Jump to content
SAU Community

Recommended Posts

Hey guys,

Looking to get my limiter fitted before the next DECA but am unsure where to go as the instructions are entirely in Japanese, and it would probably require someone who knows the Supra wiring loom.

Also I'm aware this does NOTHING for my car, if anything probably puts the engine at more risk, but f**k it. I want to go to a couple of DECAs with a straight pipe, ignition cut and make some noise. After a few events I'll pull it out and sell it.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/354648-who-can-fit-a-beer-rev-limiter/
Share on other sites

Come on it can't be that bad for the car. From what I've read its not worse than bouncing the limiter off the normal fuel cut (which admittedly is pretty bad anyway). I'm not going to sit there bouncing for shits and giggles, it'll just be when I hit the limiter as we all do at DECA, only this time with noise and flames.

Plus its a healthy stock NA 2JZ, nearly impossible to break one of those.

P.S. Thanks for the info on Edge, I'll call them tomorrow.

no, it's not the same as bouncing off the stock limiter at all. there are MANY people that have lost motors due to these things

it's an ignition cut limiter, hence the bangs.

the main cause of engine failure is a dead oil pump from the vibrations caused by the bangbangbang, which as you can imagine is not the best thing to happen while you are redlining it.

Fair enough, thanks for the warning. I always assumed the problems came from unburnt fuel passing through a white hot turbo and potentially detonating in there. Meaning my NA would be relatively safe from that sort of problem.

Shame though, would've been a lot of fun.

Do you? im yet to see any, spend more time with the car parked at a kabab shop with the autosalon crowed

Who the f**k are you? Since I don't know you and you drive old pieces of shit your comments mean nothing to me :)

  • Like 1
  • Nope 5

HAHAHA I love how he comments on my car right away, with out knowing what i drive, And it not hanging shit he said his car shoots flames i have seen him/it around and yet to see flames and most times i see the car on a Friday night it parked at the kebab joint.

Sorry if i hurt his feelings but just stating what i have seen

  • Like 2

Also I'm aware this does NOTHING for my car, if anything probably puts the engine at more risk, but f**k it. I want to go to a couple of DECAs with a straight pipe, ignition cut and make some noise. After a few events I'll pull it out and sell it.

Cheers.

Not 100% True a friend with r31 Stock as a rock sept for a upgraded clutch and welded Diff and a Bee-r got 5mph Better using it for flat shifting then his old PB other then that it prob useless i would have gone with the Gizzmo launch control that does the same things there is a vid on fullboost somewhere of my old evo 6 running it

HAHAHA I love how he comments on my car right away, with out knowing what i drive, And it not hanging shit he said his car shoots flames i have seen him/it around and yet to see flames and most times i see the car on a Friday night it parked at the kebab joint.

Sorry if i hurt his feelings but just stating what i have seen

Well you don't know me. And never seen me drive. Sonit would be quite clear that you haven't seen shit. My car is parked at bp for no more then 10 minutes till we fuel up and leave and meet up with mates. Are you one of those guys that rocks up on a Friday night alone and goes driving up and down

  • Like 1
  • Nope 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...