Jump to content
SAU Community

Recommended Posts

after having several cars almost merge into me with my hand on the horn - i've decided that my car horn just doesn't have the impact that it should.

so I was thinking of grabbing one of those "stebel nautilus" ones from ebay. they say the dB is 139dB and up depending on the model you get. i've heard the horn and it sounds like it would get peoples attention

Does anyone know if there is a max dB level that can be used for a horn? or is it a case of, as long as it's not the musical type and constantly on, its all good.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/
Share on other sites

The horn on the GTR is very poor, almost apologetic... I've tossed up the idea of getting one of those aftermarket ones for a while now. The Clio has a great horn, as do a lot of Euro cars, have thought about checking out a wrecker for a second hand one, but those stebel ones seem pretty cheap...

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5693961
Share on other sites

This is what i found for NSW not sure whether it applies to the whole country. EDIT: Maybe you should call the EPA or someone like that and get it from the horses mouth.

Noise from motor vehicle horns

Horns cannot be installed or used if they are louder than the level in clause 21 of the Regulation. This level is 120 decibels for noise made up of a single non-varying loudness and pitch or 85 decibels in any other case.

Police and Emergency Service vehicles are exempt.

Horns should be used as traffic warning devices only and not as a means of relieving driver stress or frustration.

http://www.environme...ehiclenoise.htm

Edited by Shazza24
Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5694021
Share on other sites

Haha yeah... This thread inspired me to research it a bit more.. It came on my car from japan..

I found it on google... It's actually a cool bit of kit..

Has two modes controlled by a switch... The box advertises the as:

"PA!!!!"

And...

"PAAAAaaaaan"

Haha basically u flick switch and it turns it into a tapered sound like a train

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5696743
Share on other sites

You need to get one of these. Maybe get one with a carbon fiber warp and mount it to the pillar? Perhaps put a neon light inside it?

400_F_6948748_RZ2KLvQL0RxbyaItcC83yIsN60LEgZKx.jpg

If I get cut up by some hoon I find it therapeutic to imagine the rubber end is the guys scrotum? I can work out my rage by squeezing and twisting it, whilst simultaneously making an aural expression of my displeasure. :)

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5696812
Share on other sites

Someone cut in front of me this afternoon, and I actually went through the mental process of

*idiot*

*I'll horn him*

*actually, that's right, I'm in the GTR, this horn is p*ss poor so it's going to sound pathetic*

and I let it go.

The R34's contribution to a more utopian society.

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5697910
Share on other sites

Get a Vuvuzela...

I actually used one of these out the back window of the old mans Mitusbishi express. Travelling back from the Bathurst 1000 on the Bells line of road. Nearly got cut off by a silly woman, so blew the f**k out of one of these at her and she broke so hard she locked up the front wheels!! :cheers:

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5698008
Share on other sites

i bought a set of air horns for my silvia because i was sick of getting cut off by tards in traffic.

anyways, at first the two horns weren't that loud but i had the brilliant idea of only using one horn. so double the air into that horn would make it louder and it made a huge difference. It's quite a lot louder then a normal "beep" horn.

I was thinking about buying another air compressor to increase the volume even more.

Edited by Peter89
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5698546
Share on other sites

You need to get one of these. Maybe get one with a carbon fiber warp and mount it to the pillar? Perhaps put a neon light inside it?

400_F_6948748_RZ2KLvQL0RxbyaItcC83yIsN60LEgZKx.jpg

If I get cut up by some hoon I find it therapeutic to imagine the rubber end is the guys scrotum? I can work out my rage by squeezing and twisting it, whilst simultaneously making an aural expression of my displeasure. :)

I'de edit your last sentence, while you still can hahaha.

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5698562
Share on other sites

Was the biggest disappointment after buying my GTR.

First time I hit the horn ( I use it a lot in Japan with the amount of idiots on the road) I wanted to crawl under a rock and hide.

My misso's Jimmny's horn was way,way louder.

Not anymore. Change of horn was my first mod.

I always love winding up the staff in Super Autobacs with their air horn display.

Bunch of horns all wired up with test buttons. Press them all at once and its a hell of noise and staff come running....sumimasen

Link to comment
https://www.sau.com.au/forums/topic/355633-car-horns/#findComment-5698719
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...