Jump to content
SAU Community

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

There will also be a 'guess the power output' competition for a particular car...

Manufacturer engine output specs will be available on the day.

It will be running in 4WD mode - bets taken on the day.

Should be fun :D

There will also be a 'guess the power output' competition for a particular car...

Manufacturer engine output specs will be available on the day.

It will be running in 4WD mode - bets taken on the day.

Should be fun :D

You taking bets on what car as well?

1989 VAZ Lada Niva 2121c

Will work out a closest 'guess to the nearest .1 kw' sheet. I say 28.4 - but money talks on the day :D

Engine type: VAZ-2121 type. Water cooling serial 4 cylinder OHC gasoline engines

Total cubic displacement: 1,568cc

Bore × stroke: 79mm×80mm

Stroke: Bore ratio: 1.01:1

Compression ratio: 8.5:1

Fuel feeder: Carburetor

The highest output: 73.0 Hp at 5,400 rpm

Largest torque: 11.6kg-m at 3,400 rpm

brownrussian2.jpg

Max - speak to Sam.

Another car is already set to do an SAFC tune - best to do them early on (while we eating)

Also...

A raffle to help raise funds for the MAS stand - as well as the 'power guess' comp will be run on the day. If you have anything you'd like to donate to the prize pool (and I mean ANYTHING) - please let Al know.

Trophy for top power 4WD and RWD.

Sorry for not posting guys been flat out getting the D1 Datto ready for Nationals Drift comp next week....

Minor tuning such as SAFC's, boost, or timing can be carried out on the day.

Looking forward to seeing you all and welcoming you to my new home, a lot have already brought their cars for work, or just to say hi..

PS: My 'educated' guess is 29.7 kw @ all four paws

Doc.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...