Jump to content
SAU Community

Recommended Posts

Lol @ runner! Sorry guys, out at EC doing a trackday today, 270 km/h into turn one... Love it!

Bars are looking to be in the country some time this week, so I'll be updating as soon as they arrive.

We're in the home stretch now!

Cheers, Dale.

Edited by Daleo

can i enjoy the benefits fore mentioned?

Chopps, check the link; http://www.whiteline.com.au/do_segue.php?make=Nissan&model=Stagea&vehicle=WC34+2WD%2F4WD+1996-9%2F01 and have a look at what's available for the C34.

Let me know what you're after and I will get you some prices. If you're after some guidance on which way to go (there are several options front & rear available to you) I can help you out with that.

Perhaps there is enough demand to do a C34 Group Buy?

Chopps, check the link; http://www.whiteline...4WD+1996-9%2F01 and have a look at what's available for the C34.

Let me know what you're after and I will get you some prices. If you're after some guidance on which way to go (there are several options front & rear available to you) I can help you out with that.

Perhaps there is enough demand to do a C34 Group Buy?

I'm rpetty sure he's got an M35....considering I sold him my old turbo!

I'm rpetty sure he's got an M35....considering I sold him my old turbo!

Well, if that's the case, he'd better hurry; we're due for delivery very soon! I might still be able to add to the order.

Update time.

THE BARS AND LINKS HAVE ARRIVED!:banana: :banana: :banana: :banana: :banana:

I will be picking up everything on Monday and putting everyones kits in the mail during next week.

Given estimated postage times of 2-3 days; some of you will have parts late next week and the remainder after the weekend.

It's a fairly big undertaking to get all of these packed and sent, as you might imagine, but I'll be going as hard as I can to get them out quickly.

A few people have made changes to shipping addresses over the last couple of weeks, If i could get you all to confirm with me that the addresses I have are correct; that would be great.

Thanks again for your support and also your patience with this Group Buy; it's been a pleasure dealing with you all; we're almost there.:thumbsup:

I'll do my best to PM everyone over the weekend, but feel free to contact me, if you have any questions.:cheers:

Cheers, Dale.

Edited by Daleo

Oh yeah!

Dale, realistically I'm not sure I'll get a chance to fit next weekend, so if you want to bump me down the list that's ok with me. Maybe Sunday if I'm lucky, but dyno day and tarmac rally next Saturday, so I'm happy to wait if it means other people can get theirs in. As long as I get mine before Dunc :P

Sounds good though. I paid for them so long ago it feels like I'm getting free sway bars! :banana:

Oh yeah!

Dale, realistically I'm not sure I'll get a chance to fit next weekend, so if you want to bump me down the list that's ok with me. Maybe Sunday if I'm lucky, but dyno day and tarmac rally next Saturday, so I'm happy to wait if it means other people can get theirs in. As long as I get mine before Dunc :P

Sounds good though. I paid for them so long ago it feels like I'm getting free sway bars! :banana:

No worries, it'll be fine, there's only a couple of days in it one way or the other, but I'm sure the guys will appreciate you taking one for the team :thumbsup:

Yes but those couple of days will make the difference between a weekend and no weekend, and I know if I had the weekend free I'd rather have them pre weekend :thumbsup:

Look forward to getting them. Are they 'steath black'?

Yes but those couple of days will make the difference between a weekend and no weekend, and I know if I had the weekend free I'd rather have them pre weekend :thumbsup:

Look forward to getting them. Are they 'steath black'?

Given that they are a Whiteline branded product, these ones will be resplendent in "Whiteline Silver". Probably with a sticker...:whistling:

You can always scuff them up, and go stealth rattle can black...:ph34r:

I know I would.

As long as I get mine before Dunc :P

Given I'll be in Sri Lanka for the next three weekends I dont see how I have any say in this not happening :angry:

So Dale, if you can save a few dollars by shipping mine non-express, go for it. I wont see them any time soon :glare:

Given I'll be in Sri Lanka for the next three weekends I dont see how I have any say in this not happening :angry:

So Dale, if you can save a few dollars by shipping mine non-express, go for it. I wont see them any time soon :glare:

No worries Dunc, Auspost was rock bottom anyway, so nothing to save.:thumbsup:

At least you'll have a nice present waiting on your return.:banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...