Jump to content
SAU Community

Recommended Posts

What's the story behind the car with the truck exhaust? :sick: It must be a joke...

its actually a pretty common thing in some groups in japan!!! alot of cars are styled just like that celica..............

its actually a pretty common thing in some groups in japan!!! alot of cars are styled just like that celica..............

Haha, I love the use of the term 'styled'. Like trailer parks sometimes get 'styled' by tornados :laugh:.

its actually a pretty common thing in some groups in japan!!! alot of cars are styled just like that celica..............

Wouldn't say it was pretty common though............ - exhaust is derived from the JDM trend 'Bosozoku style' and the flares are commonly combined with what the Japanese call 'low ride' and is known as 'Shakotan style'...

Edited by prince_skyline
  • 2 weeks later...

i bought a trans temp guage hoping to have a look under the car tomorrow for a spot to install the prob in the sump or maybe in the outlet fluid line to the cooler.............

i bought a trans temp guage hoping to have a look under the car tomorrow for a spot to install the prob in the sump or maybe in the outlet fluid line to the cooler.............

I'd be looking to braze/weld a bung into the sump. Best spot for it.:thumbsup: In the fluid line; you won't know what's going on when in manual mode (the GB isolates the cooler circuit) which is probably when you need it the most.

I've been idly wondering about the worth of welding a series of bungs into the trans sump (or a 1/2"plate tapped with BSP threads) one for temp gauge, one for a temp switch and a couple for a low pressure electric pump fed external cooler.

This would get around the issue of the gearbox bypassing the cooler then in manual tiptronic mode (when it's needed most). I know people reliably use small low pressure VDO pumps to scavenge and return oil to the sump in turbo setups where the drains are below sump level.

That said; it might be a bit more effort and expanse than is absolutely necessary...

An interesting thread for some detail; http://www.rbracing-rsr.com/oilsystems.htm

Edited by Daleo

I'd be looking to braze/weld a bung into the sump. Best spot for it.:thumbsup: In the fluid line; you won't know what's going on when in manual mode (the GB isolates the cooler circuit) which is probably when you need it the most.

exactly!!!! some people might think its a waste of time but i think its important seeing as i have it in manual mode 90% of the time and i dont want to destroy the fluid or the GB.

I've been idly wondering about the worth of welding a series of bungs into the trans sump (or a 1/2"plate tapped with BSP threads) one for temp gauge, one for a temp switch and a couple for a low pressure electric pump fed external cooler.

yeah might aswell get 4 bungs put in cant hurt really.

If you drive around in manual a lot why don't you try Aaron and Scotty's unlock mod? Its on here somewhere if you search, or I've got it bookmarked at home. Makes the cooler work all the time, even when it's in manual mode.

I'm looking at doing it when I get the shift kit and trans cooler in.

If you drive around in manual a lot why don't you try Aaron and Scotty's unlock mod? Its on here somewhere if you search, or I've got it bookmarked at home. Makes the cooler work all the time, even when it's in manual mode.

I'm looking at doing it when I get the shift kit and trans cooler in.

Doesn't that unlock the converter too?

I'd just like to be able to run the cooler when in manual mode with the converter locked. I'm pretty sure the unlock mod is pretty devastating for fuel economy too...

Doesn't that unlock the converter too?

I'd just like to be able to run the cooler when in manual mode with the converter locked. I'm pretty sure the unlock mod is pretty devastating for fuel economy too...

I'd heard that from Aaron, & it would want to be a great mod before I decided to go backwards on fuel economy. My ethos is always 'more for less', & I'm not sure that mod fits the job description.

yeah there's no way im doing wire cut mods........ and yeah the idea of the converter always being open and loosing power and fuel ecconomy its not worth it!!!!

Dale's idea with an external feed/pump to a cooler is probly the best way of doing it!!!

yeah there's no way im doing wire cut mods........ and yeah the idea of the converter always being open and loosing power and fuel ecconomy its not worth it!!!!

Dale's idea with an external feed/pump to a cooler is probly the best way of doing it!!!

I don't think you lose power as such; because the converter is open, it'll actually build boost quicker because it flares a little.

The only issues I can see are the obvious necessity of a $250 pump & attendant lines, and a cooler; that's before you factor in modifying the sump with internal pick up and returns at opposite ends, to ensure you're cooling effectively, not just re-cooling the oil that just came out of the return.

Also, it's added complication when a decent sized cooler and a thermostat will probably do the job 90% of the time.

  • 2 weeks later...

Tell me if I'm wrong, but surely driving in manual mode for a few minutes and then chucking it back in D would be fine? Let everything cool off and then have some fun again?

I fairly regularly drop it back into 2nd to drive through a roundabout and then chuck it back into D. *shrugs*

Tell me if I'm wrong, but surely driving in manual mode for a few minutes and then chucking it back in D would be fine? Let everything cool off and then have some fun again?

I fairly regularly drop it back into 2nd to drive through a roundabout and then chuck it back into D. *shrugs*

It depends on load I guess.....I know when my car was stock it was not a huge issue going across the gate all the time but I never stayed there more than a couple of minutes. But... with a little bit of HP/NM the standard GB cooks pretty quickly(better once the HD2 kit is done)........a couple of minutes wont hurt though imo......best idea is to knock it across the gate after the second gear shift.......with the standard turbo revving the thing to 6,500rpm is a waist anyway + your already doing over 110km's.

Mind you Paul you will find after you do a couple of the VB's a difference in oil colour between those who drive across the gate all the time and those that don't.

Edited by Jetwreck

I was thinking of drawing up a simple mod to allow the ATF to pump thru the cooler whilst in manual mode, BUT switch back to standard when in D, thus not buggering my exceptional fuel economy. I'll work on this soon, maybe this weekend, & post some results if anyone is interested.

Craig, I wouldn't have though there'd be that much difference in fluid colour (I'm guessing some looked a bit 'burnt'?) so I will be using manual mode sparingly until I sort something.

im interested. Would this be a wiring mod or require any additional parts beyond a switch/wires??

Maybe a relay so it happens automatically, but it shouldn't cost more than pocket change. I haven't had more than a cursory glance, but noticed a few things when reading up on speed wires for the cruise control.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...