Jump to content
SAU Community

Recommended Posts

yeah because bigger is always better HUH................................................................................................................. not :P LOLz

i'm finally going to fit my twin 14" thermo fans and remove the engine clutch fan but i'm wondering about what controller to use.........

just a simple thermostat, relay setup or is there a proper fan controller than has a temp display and everything.

cheers :)

i'm finally going to fit my twin 14" thermo fans and remove the engine clutch fan but i'm wondering about what controller to use.........

just a simple thermostat, relay setup or is there a proper fan controller than has a temp display and everything.

cheers :)

The one that I got from Scotty seems fine so far, the only downside to the surface mount thermocouple is just that; it's not in the water.

It does seem accurate; the issue will be ensuring it reads the water temp correctly.

Something with a BSP style thermocouple would be ideal though.

I'm running each fan with its own fused 30A relay (only running 20A fuse per fan though), then triggering those with another relay activated by the controller.

The kit comes with a 60A relay to use; but after seeing my supposedly 40A relay and it's wiring cop a hiding recently; doing them separately is better for peace of mind (unlikely to pop both fuses).

I'd also look at putting a barrier in the shroud between the two fans, so that if you want to switch them separately; you can.

Also, if one fails you won't be pulling dead air through the other fan and back out; rather than through the radiator.

Edited by Daleo

http://www.ebay.com.au/itm/Violence-Super-Fan-Temp-Controller-3-For-Thermo-Fans-/150937504748?pt=AU_Car_Parts_Accessories&hash=item2324938bec&_uhb=1#ht_500wt_1414

That is the one I just bought, it has two sensors and can turn the fans on with either temp I think. Not as good quality as the other one I sold Dale though by the looks of it but I won't know how it works for another few weeks.

fitted the rear chassis brace this morning and done a run through Macquarie Pass and i like it alot, i also adjusted the rear shocks to the same stiffness as the front and what a great result they both made, got rid of the understeering problem i was having so hopefully through the faster corners its alright too!!!

having a 2tonne boat that understeers sucks so now im happy as its given me a bit more confidence in the car as it feels so much better allround!!!

  • 2 weeks later...

just done a brake fluid flush with castrol high performance/race Dot 4 fluid and put the track rims on (18" stockies with Federal 595's).

tommorrow i'll get a wheel alighment and get all the parts to fit the power steering cooler............ suggestions welcome, i'll be heading to rocket midday to pick it up.

and still waiting on the sammich plate and then i can buy the rest of the gear to put the oil cooler in aswell ready for the track day on the 1st of Dec!!!!!

busy day tomorrow but luckily its my day off!!!!!!!!!!!! hehe

just done a brake fluid flush with castrol high performance/race Dot 4 fluid and put the track rims on (18" stockies with Federal 595's).

tommorrow i'll get a wheel alighment and get all the parts to fit the power steering cooler............ suggestions welcome, i'll be heading to rocket midday to pick it up.

and still waiting on the sammich plate and then i can buy the rest of the gear to put the oil cooler in aswell ready for the track day on the 1st of Dec!!!!!

busy day tomorrow but luckily its my day off!!!!!!!!!!!! hehe

I just picked up a small trams cooler, bar and plate, that my local Repco were clearing out.

Apparently bar and plate you can go smaller than tube and fin, so mine is pretty small, just cable tied onto the mesh in the lower part of the aero bar.

Then when we ran the hose to the power steering pump, put this spring stuff on the hose so it would do an almost 90 degree bend without crimping, put joiners in the hose and connected the new hoses to the old.

Easy, and if there's ever a problem I can just disconnect the cooler and reconnect the stock lines.

Cooler got very warm at the last track day but there were no problems at all.

What are you doing for an oil cooler? Got the plate sussed just trying to work out where to mount a cooler, and your config should be the same as mine.

There's room to the side? With a thermo fan?

I will eventually move the steering cooler above the FMIC, was going to put the trans cooler against the radiator, behind the FMIC.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...