Jump to content
SAU Community

Recommended Posts

Hey sau,

Not long ago purchased a 1999 RS four S (dayz edition). Looking at my next catback exhaust system for the car, it came with a split dump pipe a custom welded front pipe and a OEM NISMO catback. I need something of high performance and nice decent note to the exhaust.. the following link shows the systems im looking at http://www.nengun.com/search/#t:n:u;v:90049;c:6;g:1

Kakimoto R

Kakimoto Full mega N1

HKS hi-power (used on my R33 skyline)

HKS silent hi-power

Greddy power extreme-GS

Just need some opinions on which is the best system i can buy, not too concerned about price just quality

Best regards chris.

Link to comment
https://www.sau.com.au/forums/topic/358119-wgnc34-stagea-exhaust-questions/
Share on other sites

Hey man,

Thanks for the advice, was running a hks hi power 409 on my R33 skyline. I feel it wasnt just cutting the cheese and felt like there are much better systems out there. Like i said not too concerned about money just want the best of the best

If there are any other systems i have missed out on please let me know

i've got fujitsubo s/s 3" on mine.

i think its a good exhaust for an every day driver (like mine) because it isn't too loud in the cabin, doesn't drone, and still has a bit of note when you get on it, but 89dB so remains legal.

the construction is just amazing - i love getting under the car and admiring it.

but i have heard that the HKS and Kakimotos flow better - but louder and may be over legal dB.

considering a kakimoto, had the hks hi power 409 on the R33

which one would you guys recommend out of the two kakimoto's in the nengun link i posted?... The Kakimoto R or the

Kakimoto Full mega N1.

Looking for the one that is somewhat louder and flows alot better.

Was considering that, like said money is not a issue trying to decide between the two Kakimotos in the link just not sure which one would flow better and have a better note.

somewhat a fair bit louder then my oem NISMO catback

if money isn't an issue, and either is time - then i'd get one made locally in stainless steel - with a lukey muffler.

every import i hear with a local muffler on it sounds so nice and deep and bassy at idle and down low. such a smooth sound, where as i think the jap mufflers sound a bit more 'zingy'......IMO. or you could go for a varex muffler, and have control over the sound.

but for buy now, 100% guaranteed bolt up on the weekend solution - i'd just go for the N1 exhaust with a decat pipe, and perhaps put a remote butterfly in it to silence it.

p.s. you should have just bought my car when we talked and you wouldn't be facing these issues hahahah :-P

if money isn't an issue, and either is time - then i'd get one made locally in stainless steel - with a lukey muffler.

every import i hear with a local muffler on it sounds so nice and deep and bassy at idle and down low. such a smooth sound, where as i think the jap mufflers sound a bit more 'zingy'......IMO. or you could go for a varex muffler, and have control over the sound.

but for buy now, 100% guaranteed bolt up on the weekend solution - i'd just go for the N1 exhaust with a decat pipe, and perhaps put a remote butterfly in it to silence it.

p.s. you should have just bought my car when we talked and you wouldn't be facing these issues hahahah :-P

Your not wrong there man, but im a sucker for a stock car... love to modify it to my own liking with my insparation

Would be good to get some more opinions maybe someone who has a kakimoto? tossing up between the N1 and the NUR at the moment. Had the HKS on my R33 was happy with the sound but want to try something different this time

if you've got the fun tickets to spend check out ces racing exhausts at brissie and get a full s/s with split front dump and pick up about 30 xtra kws .....worth every centpost-20831-0-26229100-1301035478_thumb.jpg

  • 3 weeks later...
  • 1 year later...

Mate the Jap ones are not all there cracked up to be, your mostly paying for sticker name. I have been going through the same dilema at the moment. In my opinion I think the Jap sticker brands are great for coolers and add ons like oil catch tank etc. But with price not being your deciding factor I would say you cant go past CES racing. I have been looking for the best quality and flow myself without price considerations and no one but CES racing will give you guaranteed kw increase. Full CES 3"stainless system with ceramic coated twin dump pipe for $2640. Im booked in to get mine fitted in 2 weeks time. Guaranteed 40kw increase at the wheels, best systems around for quality and performance I reckon :)

Mate the Jap ones are not all there cracked up to be, your mostly paying for sticker name. I have been going through the same dilema at the moment. In my opinion I think the Jap sticker brands are great for coolers and add ons like oil catch tank etc. But with price not being your deciding factor I would say you cant go past CES racing. I have been looking for the best quality and flow myself without price considerations and no one but CES racing will give you guaranteed kw increase. Full CES 3"stainless system with ceramic coated twin dump pipe for $2640. Im booked in to get mine fitted in 2 weeks time. Guaranteed 40kw increase at the wheels, best systems around for quality and performance I reckon :)

I'm guessing you're talking rb26? Maybe with a retune that might be possible. And for that price, I'd hope it includes one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...