Jump to content
SAU Community

Recommended Posts

Sorry i couldn't make it guys , one of my lower front ball joints were damaged (f**k knows how it wasn't very old) but i couldn't find a replacement until about an hour ago , i even had the gearbox out to replace the noisy throw out race lol , atleast i know i'm a sure start for the next one :( . How did it go?????? looked like a nice day for it!

  • Replies 127
  • Created
  • Last Reply

Top Posters In This Topic

Excuse the French, but holy shit one of the best f**king days of my life, first couple of laps were a bit terrible, then tried to go faster and braked too late for a couple of laps, then felt like it smoothed out toward the end :)

Perfect day for it, and a really good turnout. Definitely should do it again :)

f**king EPIC!!!11!!

I'm hell up for a working bee BBQ on anyones car. I need to learn a heap more about this. But as Jack said earlier on monthly is probably a bit too much for my budget, keen to go along to watch if others are going though.

Pity you couldn't make it mate, really good day :)

Yeah what an epic day! I had heaps of fun just hanging out, got a ride in a couple of cars too which was awesome.

Here are some Pics.

_1019585.jpg

_1019554.jpg

_1019602.jpg

_1019572.jpg

_1019567.jpg

_1019562.jpg

_1019628.jpg

_1019632.jpg

_1019600.jpg

and here is the link to the times I jotted down.

https://spreadsheets.google.com/ccc?key=0AulhL1L89CwwdFphNzRvZXFzb2M5MG4zLWdqbEh3NVE&hl=en&authkey=CJ29mJQF

Missed a good track day Toff.... sun was out, air temps were down and there was only half a dozen cars running so everyone had heaps of time on the track.

Good day and it was good to put names to 'screen names'

Justin

yeah great day guys, always learning, looking forward to getting out there again with some improvements to my car. well done to those who helped organise it. Good way to spend a sunday, with like minded datsunoholics

Missed a good track day Toff.... sun was out, air temps were down and there was only half a dozen cars running so everyone had heaps of time on the track.

Good day and it was good to put names to 'screen names'

Justin

yeah i'm spewin , teach me for leaving things till the last minute :( , wasn't game on tracking it with a loose ball joint , i ended up getting a mate to drop me one down but figured it was too late by 2pm to come out . you busy tomorrow mate , i'll call you re parts around 12-ish

annoyed i couldn't get out there can't work out whats going on with my brakes rant.gif

looks like it was a good day, hopefully ill be there for the next one

i got a hoist if you need it in the air one weekend? , what are your brakes doing??

who crashed their car btw! hope the damage isn't too bad

Edited by toffy

i have a super soft pedal almost to the floor soft & no rear brakes bled them numerous times but still nothing theres no pressure getting to them.

master cylinder fail?

all in all, i had an awesome day! 1st laps out was shit due to mass missfire in high rpm range.. lucky had some new plugs thanks to the awesome jamie , swapped them over.. and it appears he took a photo lol.. turns out 5 plugs were .7 gap.. 1 was 1.1..... lol... car ran beautifully next few runs until i took brodie out, several laps, new pb.. car decided it needed to get super hot (115) and steam itself up in the pits lol.. all in all ive decided.. i need a new diff.. gearbox.. and a bunch of niggly issues fixed before next outing. good to meet people again!

also... jacks car... an animal... i swear he was trying to show off since i was in the car.. with all those spins :-P

not noticable in daily driving mate, if it's soft all the way to the floor nearly , i'd be checking all of your brake lines/calipers for leaks or signs of tampering :) , does it loose fluid at all?

the booster is working fine? you probably can't tell but if that's worn/damaged it can cause similar issues

Edited by toffy

who crashed their car btw! hope the damage isn't too bad

It was Tim who had a bit of a spin a little in front of me on the hill, brakes locked up and did a little spin :) basically completely pulled up before the tyre wall though, damage was a slightly bent exhaust and a few scratches on the rear left panel :)

My entire family turned up to show support at the exact point this photo was taken and thought I had trashed my car :P

also... jacks car... an animal... i swear he was trying to show off since i was in the car.. with all those spins :-P

hahah, oh its not very friendly is it! same boat as you mate, got some things that MUST be done before i hit the track again, the beast must be tamed =)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...