Jump to content
SAU Community

Recommended Posts

I also run 40 psi all round in 255/35/17s.

If I know I'm going to be smashing it, 50 will be what I run.

Will say though, that my car isn't a daily, already has rock hard suspension and no rear seats :P

Must handle like a dog on tiles.

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

OK, its basics but in case anyone has overlooked it -

You set your pressures when the tyre is cold. when you drive the tyre gets hot and pressure increases.

Read it like this - your a dead set idiot if your tyre says max 50psi on the sidewall, and you go pump it up to 50psi when its stone cold. When it gets hot- it'll add much more pressure leading to potentially unsafe situations.

Thats why "Global Warmer" had a better experience on putty rd, when he lowered his pressures, because it wasn't causing his tyres to over pressurise when hot.

Sorry if you know all this and I have wasted your life.

OK, its basics but in case anyone has overlooked it -

You set your pressures when the tyre is cold. when you drive the tyre gets hot and pressure increases.

Read it like this - your a dead set idiot if your tyre says max 50psi on the sidewall, and you go pump it up to 50psi when its stone cold. When it gets hot- it'll add much more pressure leading to potentially unsafe situations.

Thats why "Global Warmer" had a better experience on putty rd, when he lowered his pressures, because it wasn't causing his tyres to over pressurise when hot.

Sorry if you know all this and I have wasted your life.

Wouldn't the pressure ratings on the tyres be cold values taking into account any increase due to heat build up? ie 50psi max means 50psi max when cold.

WGNPWR - Wouldn' Charles' law be a better one to throw in there? :nyaanyaa:

OK, its basics but in case anyone has overlooked it -

You set your pressures when the tyre is cold. when you drive the tyre gets hot and pressure increases.

Read it like this - your a dead set idiot if your tyre says max 50psi on the sidewall, and you go pump it up to 50psi when its stone cold. When it gets hot- it'll add much more pressure leading to potentially unsafe situations.

Thats why "Global Warmer" had a better experience on putty rd, when he lowered his pressures, because it wasn't causing his tyres to over pressurise when hot.

Sorry if you know all this and I have wasted your life.

Very true. Once I check the pressure after driving from Brisbane to Gold Coast on a hot day and its showing 58 (was 40 at cold)! I got a shock of my life and immediately reduce it. I normally set mine to 38 (cold) these days and around 34 (cold) for some spirited driving.

how about measure the pressure before you leave home. if they are down 4psi each, then go put 6 or 8psi in at the servo.

drive around normally. check them again the next morning when cold, then release any excess pressure.

easy!

You must have good suspension to compensate your tyres which are as hard as concrete!!

Must be bloody slippery in the wet/rain with those pressures.

Tein super wagons, 33gtr front swaybar.

And no, it's actually got a fair bit of grip in the wet even in 2WD.

Edited by bubba

36 psi cold for 17 inch wheels, but every tyre is different

higher pressures, better response

lower pressures better grio

but this does not mean that 22 psi handles better than 36psi thats just stoopid - thought i'd throw that in just incase someone tries it...

also i have about 75% of my tyre filled with nitrogen from the servo :nyaanyaa:

41 psi on 235/40R18. was running 36psi and it cornered like shit with abit of understeer. much less understeer and 'IM ON A BOAT' feel.

as for nitrogen.

1- much less moisture in your rims/tyres.

2 - psi doesnt get higher with tyre temp (more stable pressure).

3 - pure nitrogen is more dense than compressed air, so less frequent pressure top ups at the servo. (perfect for trailer tyres)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...