Jump to content
SAU Community

Recommended Posts

Aeromotive stealth

Just got mine $240 from ebay, did free shipping cos I bought it without bidding on Ebay

340lph @ 40psi and 13.5V

I was gonna take some pics of the install but it looks similar in dimentions to a walbro. Chances are I wont be able to do it this weekend either

Edited by sucram

Yea but why would you run intank, increases the chance of something going wrong, as well as reduced capacity, and more effort ;)

Wut?

I've been running my 044 like that for years now, so has my mate and that single, in-tank 044 is supporting well over 500awhp.

IMO, the 044 in-tank with a stock-type sock filter setup is way better than the 040 with integral pickup, and the 044 flows more.

Edited by bubba

Aeromotive stealth

Just got mine $240 from ebay, did free shipping cos I bought it without bidding on Ebay

340lph @ 40psi and 13.5V

I was gonna take some pics of the install but it looks similar in dimentions to a walbro. Chances are I wont be able to do it this weekend either

that looks like a good pump @ 340lph :)

have u fitted it as yet & are the dimensions similar to that of the oem gtr pump?

there are 3 versions of the 'stealth' so which is the right pump? would it be the 'centre inlet', 'offset inlet' or 'offset inlet/inline'

a few other q's:

1. stevo - the A1000 has serious flow (800lph @ 40psi), do u know if it fits in the tank of an r32?

2. pierburg pumps have also been recommended, do they flow as much as the aeromotive pumps as i cannot locate a website representing pierburg pumps?

3. the 'stealth' is rated @ 340lph on 40psi, what fuel pressure would the gtr run at high rpm/load? reason i ask, flow drops significantly @ 250lph on 75psi (as per attached flow chart) whereas the bosch 044 flows 200lph @ 5bar = 72.5psi

post-8728-0-88042900-1302755310_thumb.jpg

Marko, fuel pressure isn't rpm dependant, it boost dependant. Our systems are 3bar systems, if you're then running 2bar of boost then the fuel pressure will be 5bar at full boost :thumbsup:

Marko, fuel pressure isn't rpm dependant, it boost dependant. Our systems are 3bar systems, if you're then running 2bar of boost then the fuel pressure will be 5bar at full boost :thumbsup:

ok.

so my calculations should be based on something closer to 5bar fuel pressure as im running 21psi

My calculations are based on 5bar moving forward & here are my options...

1. Bosch 044: 200lph @ 5bar (more info: http://www.bosch.com.au/content/language1/downloads/fuelpumps.pdf)

2. Pierburg E3L series (700228510): 330lph @ 5bar (more info http://www.compsystems.com.au/index.php?option=com_content&view=article&id=106:pierburgefp&catid=2:ecu&Itemid=14)

3. Aeromotive A1000: 700lph @ 5bar (more info: http://aeromotiveinc.com/products-page/fuel-pumps/11101-a1000-fuel-pump/)

4. Aeromotive Stealth: 250lph @ 5bar (more info: http://aeromotiveinc.com/products-page/fuel-pumps/11140-340-stealth-fuel-pump-center-inlet/)

My concern with the aeromotive A1000 is if i can make it fit in the oem fuel pump cradle as it looks massivein comparison to the other pumps, there no dimensions available...

Pierburg flows 66% more than my 044 which is awesome...will the pierburg support 450awkw?

what are peoples thoughts?

thanks in advance :)

The Pierburg is very long and thin, like two Walbro's end to end.

The A1000 is around 3.5 inches round and 6 inches long as I remember. It can be mounted intank apparently but it is single speed, there are similar pumps around with variable speed to stop the fuel heating so much. These require -8 fittings and hoses at least for their rated output apparently.

Best and cheapest option is twin Walbro's cost and price wise, may not be the most reliable though but thats what I went for.

Wut?

I've been running my 044 like that for years now, so has my mate and that single, in-tank 044 is supporting well over 500awhp.

IMO, the 044 in-tank with a stock-type sock filter setup is way better than the 040 with integral pickup, and the 044 flows more.

Designed as an external pump. Not saying it won't be fine, just saying it isn't what it was designed for :)

Designed as an external pump. Not saying it won't be fine, just saying it isn't what it was designed for :)

So? An 044 internal is fine, I use one and control it with Vipec. Stop posting crap.

Designed as an external pump. Not saying it won't be fine, just saying it isn't what it was designed for :)

The 044 doesn't have an open end like the 023 and 040....so you clamp a sock on the bottom of the pump and solve the problem.

how did u set up your twin walbro's? any pics?

The M35 pump is similar to the 350z, it sits under the rear seat. One Walbro and -6 line for each rail running ID1000's, non return valves before the reg should let me know if one pump fails so as not to run lean.

post-63525-0-56664100-1302816785_thumb.jpg

post-63525-0-64411000-1302817351_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...