Jump to content
SAU Community

Recommended Posts

I have a Nismo leather gear knob in my car and was basically the only modification done to the car when I bought it. While I like the gear knob over the years it is getting very worn and ripped and needs replacing (as seen below).

nengun-0307-00-nismo-leather_shift_knob.jpg

To replace it for the same one will cost $80. I figured $80 is quite a lot of money for something that really isn't that flash looking. So I started looking at what all you guys run. Turns out most of you guys run other Nismo gear knobs that cost even more or just your basic universal type from Autobarn for $30-$50.

Other than those there are all your brand name Sparco, Momo, Isotta etc. But I find most of those are quite overpriced for what they are and don't really blend in with a lot of Skyline interiors, usually stand out to much. I'm not a fan of the gearknob being the first thing that stands out when you look inside (so no Dildo gear knobs for me lol).

Any way I wanted something that looks a bit factory to go with the rest of my interior theme but a bit more modern at the same time without looking out of place. I finally came across a German company that does very luxurious gear knobs for BMWs, Mercs, Porsches etc. and fell in love!

Basically there are a few different styles available with a mixture of aluminium and leather, chrome and leather or just leather. However the iceing on the cake is that they have the H pattern on the top of the gearknob for a factory look (also sometimes required for legality in some states...) that illuminates via LEDs in a choice of colours; red, blue, white and yellow.

594_0.jpgCR01.jpg

597_0.jpgCB07.jpg

596_0.jpg594_1.jpg

I think they look fantastic and are exactly what I would like. However they obviously don't make them for Skylines....so here is the question, what do you guys think? If there was enough interest perhaps we could get them to make them to fit Skyline M10 x 1.25 gear sticks.

Price wise they are around $80-$100 so good price for what you get.

Gear boots in seude and leather are also available to match the gear sticks.

So what do you think, do you guys like them? They obviously wont make me a one off M10 just for me, but if there was a few of us I don't see why it would be a problem.

Link to comment
https://www.sau.com.au/forums/topic/360898-modern-skyline-gear-knobs/
Share on other sites

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

I wouldn't mind one if it was made in black aluminium, like my Nismo one :D

And as for you Phil... I have a stock gear knob for sale for $30 if you are interested, not in the best condition, but have a better one in better condition for $60 :P

Haha. Well either I will get one of these German ones or I will just get another one of the ones I allready have. I can't have anything without leather due to the sun up here. Makes it unbearable to touch if it sits in the sun for even 10 minutes.

I'd definitely be in, if someone could tell me why my gear stick is 12mm? In a 1996 R33.. Any ideas? I've got the stock gearknob on, but tried a Nismo one and it wouldnt fit? Nor would a 10mm nut.. But a 12mm nut would fit.. wacko.gif

I thought mine was M12 also... Havent look for ages so could be wrong..

Phil.. Instead of getting them to make you a small run, why don't you get a spacer made up so you can reduce it down to M10? Or are you looking to not modify it at all?

Hmmm didn't think about that, I suppose that would also be an option.

So some of you guys have M12 gear sticks? Pretty sure mine is a M10, i'll double check later on.

M12 would be easy given they allready have them :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...