Jump to content
SAU Community

Recommended Posts

So enyone going to join me at Wakefield on the 28th May for the SAU V Rotary 2nd track day?

http://www.skylinesaustralia.com/forums/topic/361770-s-a-u-n-s-w-wakefield-trackday-number-2-for-2011/page__gopid__5775117

Currently I'm able to claim the slowest and fastest times for the ACT. I know its a bit but it would be good if someone else could afford $400 to do a track day in the "sports" car we all own.

Link to comment
https://www.sau.com.au/forums/topic/361829-wakefield-28-may/
Share on other sites

  • Replies 86
  • Created
  • Last Reply

Top Posters In This Topic

Doesn't bother me there'll be plenty more track days. Mine was on the road most of last year and I've been to the drags 4 or 5 times in the last 6 months and that's been fun and crazily addictive!

Should add, the main reason of the offroading was actually gearbox repairs since I busted my second gearbox at WSID in Feb :)

Yes rubber and pads will be needed. Pre and/or post.

Just make sure your car and you are ready. Some people take their car to the track unprepared and come home in the front of a flat bed tow truck. Talk with someone who's been a few times and listen. IMHO - Cooling, oil flow, suspension and braking will make your experience a happy one.

:thumbsup:

Edited by Sinista32

Yeah new front pads before you go...rubber well that depends on how hard you go...my 33 on street rubber lasted a few track days but was taking it (kinda) easy and cause im awesome had no spins/offs :P, but passenger front tyre gets hammered at wakefield

GTR will be even worse for front tyre wear.

Also Fresh oil and 500ml overfill to prevent oil starvation

No loose objects (take out everything that might hurt if you crash and that includes subs/amps etc)

A wheel alignment before you go (nothing worse than the car darting to one side under brakes at near 200km/h)

And most importantly pay attention to what is going on around you Check your mirrors lots and let the faster guys through when you can

and watch for any yellow/red/chequred flags

and

RELAX AND HAVE FUN!!!

Ive heard after you've pretty much earned yourself a new set of tires and brake pads.. any info on that ?

It's not as bad as some make it out.

Tyres: I have Federal 595 RS-R, they have lasted 3 track days and will last another one. That have a 160 wear rating (fairly low) so other tyres should last longer. (depends on how you drive as well) As long as you have 50% tread you should be fine.

Brakes: I got 1 1/2 track days out of my original worn pads, About the same for the disks. I upgraded the pads to EBC yellow and RDA rotors from the group buy later and have not had an issue with 3 track days, they still have plenty left in them. Again as long as you have 50% life in pads you should be fine. I note I am looking and a big brake kit now, but the brakes suffice for now.

Oil: I always put new oil in and put and extra 500-1000ml in after it is full as a safety margin. Also replace the oil after a track day.

Oil temp: Do you have an oil cooler? If not you I stongly recommend Castrol 10-60, it will keep your oil temp lower all day and keep that important protection at the high levels of heat a full track day will cause. I have a spare bottle if you need as I should get my oil cooler before the track day.

Fire entinguisher: Get a supercheap one, securley install somewhere you can easily reach it. Mine is bolted to the car, if that million of 1 chance you get into a serious accident you want to know where it is. (also CAMS requirement)

Metal valve caps: Just spend $5 at supercheap and get them.

Wheel alignment: Unless your car has not had one for ages or shows signed of needing one, save your money. The best alignment for the track are terrible for the road, lots of camber. If you can take your car up on a trailer, then get a track based alignment and then set it back to a normal alignment when you come back.

Other issues I've come accross

Turbo's: If you still have the original turbo's, they are a time bomb 15 years old and not made of metal. Get them replaced. I learned the hard way.

Intercooler piping: Replace with a hard piping kit, 15 yo soft piping does fail.

Variable torque controllers: Great things to help stop the rear end swinging out

Trailer: Great for if your day ends suddenly, also easier end of the day drive back and you can make some great mates with people who you lend it to if need be. Luckily I've never been in this situation and I will be driving up.

It's not as bad as some make it out.

Tyres: I have Federal 595 RS-R, they have lasted 3 track days and will last another one. That have a 160 wear rating (fairly low) so other tyres should last longer. (depends on how you drive as well) As long as you have 50% tread you should be fine.

Brakes: I got 1 1/2 track days out of my original worn pads, About the same for the disks. I upgraded the pads to EBC yellow and RDA rotors from the group buy later and have not had an issue with 3 track days, they still have plenty left in them. Again as long as you have 50% life in pads you should be fine. I note I am looking and a big brake kit now, but the brakes suffice for now.

Oil: I always put new oil in and put and extra 500-1000ml in after it is full as a safety margin. Also replace the oil after a track day.

Oil temp: Do you have an oil cooler? If not you I stongly recommend Castrol 10-60, it will keep your oil temp lower all day and keep that important protection at the high levels of heat a full track day will cause. I have a spare bottle if you need as I should get my oil cooler before the track day.

Fire entinguisher: Get a supercheap one, securley install somewhere you can easily reach it. Mine is bolted to the car, if that million of 1 chance you get into a serious accident you want to know where it is. (also CAMS requirement)

Metal valve caps: Just spend $5 at supercheap and get them.

Wheel alignment: Unless your car has not had one for ages or shows signed of needing one, save your money. The best alignment for the track are terrible for the road, lots of camber. If you can take your car up on a trailer, then get a track based alignment and then set it back to a normal alignment when you come back.

Other issues I've come accross

Turbo's: If you still have the original turbo's, they are a time bomb 15 years old and not made of metal. Get them replaced. I learned the hard way.

Intercooler piping: Replace with a hard piping kit, 15 yo soft piping does fail.

Variable torque controllers: Great things to help stop the rear end swinging out

Trailer: Great for if your day ends suddenly, also easier end of the day drive back and you can make some great mates with people who you lend it to if need be. Luckily I've never been in this situation and I will be driving up.

RSR's are track tyres (kinda) so handle the temps better, normal road tyres fall to bits and make you feel like you are driving on ice when they get to hot.

I never said go and buy Ikeya Formula Suspension arms and spend 2k on an alignment, I said get one to prevent things being difficult under brakes/mid corner etc You WILL find issues with your suspension on the track that you would never notice on the street

Also no need to go buy new turbos for 1 track day.

Just turn the boost down to standard and stay off the limiter

and your right foot, stops the rear end getting loose :P (bloody Cheater cars lol)

RSR's are track tyres (kinda) so handle the temps better, normal road tyres fall to bits and make you feel like you are driving on ice when they get to hot.

I never said go and buy Ikeya Formula Suspension arms and spend 2k on an alignment, I said get one to prevent things being difficult under brakes/mid corner etc You WILL find issues with your suspension on the track that you would never notice on the street

Also no need to go buy new turbos for 1 track day. Just turn the boost down to standard and stay off the limiter

and your right foot, stops the rear end getting loose :P (bloody Cheater cars lol)

I can only say that in my experiance with the exact same car, I've had the 595 SS and they didn't fall to bits. Actually no tyre except the very expensive type has ever gone off on a track day when the heat gets to them from the people I've gone up with. On the other hand I have heard plenty of people complain about their slower then expected lap times and blame the tyres. Not sure this was the tyres fault :P. Put it another way, ever watch "days of thunder"? When the mechanic tells tom cruise how to drive, he gets better times and doesn't tear up the tyres. Drive a car smooth and far less damage is caused to the tyres, any type of tyre. Saying that, you will use a lot of the tyre during the day however you drive.

Again I have not experianced any issued with my standard alignment going to the track. I do not think this is worth the money unless you know or think there may be a problem. That's my opinion based solely on my experianced with this car, track days, and common sense. Yes you will notice effects more at higher speeds, but they will still be there at slower speeds. You would be better spending the money getting a place like ESP to do a full check over of the car to ensure it is right for a track day.

I probably would not buy new turbo's for a track day. But I ended up with a 10K bill for repairs because that is exactly what happened to ME. Boost on standard and doing a warm up lap. (OK I got a few upgrades at the same time) I've heard many people doing track days on standard turbo's fine. I've also heard of plenty of ORIGINAL turbo's failing after 10-15 years of use.

I get into trouble with Dereck from 5th gear about my right foot all the time. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...