Jump to content
SAU Community

Recommended Posts

Hi Guys,

I'm about to get a full engine rebuild and was thinking whilst it's out I should also do something with my diff.

I'm a little green on this and found this topic though it's for a rear wheel drive only car. http://www.skylinesaustralia.com/forums/topic/130896-question-of-wat-diff-to-get/

I've got a Stagea 260RS which from a running gear perspective you would all know has the R33 GTR drivetrain.

I've noticed a slight whining noise under moderate acceleration coming from the diff and was wondering what options I have to rebuild or replace. Whether a NISMO kit is the best option or an aftermarket option. I've already tried putting redline oils in everything but that made little difference.

The car is for street use though I wouldn't mind doing some track work once I get the rebuild done. If this helps after the rebuild and other upgrades are complete I should have around 350rwkw.

Thanks,

Adam

Link to comment
https://www.sau.com.au/forums/topic/362607-question-what-diff-to-get/
Share on other sites

I've done some searching last night and might have found a couple possibilities. I don't want a 2 way and from I've picked up a the only 1.5 one that is still streetable is the

NISMO GT LSD Pro.

The above being mechanical seems like the cheaper option as with the dollar doing so well I've priced one of these from Japan including oil for $1400 delivered.

I did find another option below which is slightly more expensive, best price is 2K.. these seem a little harder to find on the open market. I'd be interested to hear of anyone using a helelical diff. What would you do if this was your street car?

Quaife ATB Helical LSD Differential

get the nismo.. its the best of the mechanicals. theres very littl difference between a 1.5 or 2 way diff. both are streetable and both can get you out of shape if you drive like a dick. to ensure quiet operation be sure to run the diff in correctly.

the quaife's are really the best for GTR's that are tracked. i wouldnt waste the coin for a street car.

get the nismo.. its the best of the mechanicals. theres very littl difference between a 1.5 or 2 way diff. both are streetable and both can get you out of shape if you drive like a dick. to ensure quiet operation be sure to run the diff in correctly.

the quaife's are really the best for GTR's that are tracked. i wouldnt waste the coin for a street car.

Well I'm getting the motor rebuilt so for the first 500 or so K's I'm told to be gentle with everything keeping the car under low revs, once this is done a slightly harder driving is required before getting re tuned to unlock full power then go do some power runs, preferably hill climbs to really push the limits to get everything worn in correctly.

Is this the kind of driving that would run the diff in correctly and ensure a quiet operation?

Can the stock diffs be rebuilt locally if I was to maintain the standard setup? Just not sure on the pro's and cons of rebuild VS upgrade. I want to get everything done the best I can though the budget is fast running out so if I can get away with something that will last and save me a few dollars I'm likely to take that route.

I wouldn't say I drive like a dick too often though I don't mind every now and again getting the car a little out of shape around corners.... maybe this is whats caused the issues to begin with and I need to stop doing this to keep everything in shape and good order. I think this tendency is a throwback to some of my earlier rear wheel drive wannabe rally experiences. Where I grew up I used to belt around on dirt roads a bit (used to live up a 10km track), some good adrenalin rushes to be had on the dirt when things would get a little sideways.

Okay so I'm leaning heavily towards the NISMO diff upgrade. It would be good to hear from someone that has this done on there car, just curious to know first hand what they're like to use in a daily. I've read on some other forums they can be a little noisy when cold. How long do they take to warm up in typical weather ie) over 20 degrees. Do they need any kind of regular attention or servicing? Just curious to know how these are in typical applications and how many k's they are good for. I just want to know if this is the best option for durability and control. A little noise everynow and again I can handle, its more about doing things once if you know what I mean.

I guess lastly, getting my diffs rebuilt is still in the frame though if the costs come close to the above idea I probably wont bother with a repair as I've read of people having issues when this isn't done right, my only concern with this is with 350+kw at the wheels and further power gains to be had once I get some more money for fuel system upgrade for E85 that this could be asking too much from the R33 stock drivetrain. If anyone knows a little about this I'd be interested to hear from you.

I keep hearing this guys name Steve from DIFF & GEARBOX INDUSTRIES in Brisbane. Thinking of hitting him up tomorrow for a quote, has anyone had any experience with these guys?

i have a nismo 1.5 and 325rwkw

i drive it daily and have 0 troubles with noise etc

anyone who whinges about the noise frpm a nismo pro model, is just a whiney bitch like clarkson... full stop

  • 2 weeks later...
  • 7 months later...
  • 1 month later...

I believe my R33 had a nismo 1 way, i cant remember to be honest.. Came with the car. Like anything, regular servicing is always a good idea.

Cold it wasnt bad. Mine had diff clunk when doing low-speed, low-load turns.. But it was only slight and before you knew it, you wouldnt even know its there.

Sorry for the necro, just thought this was relevant.. Plus interested in what the OP decided to go with, and how it performed :)

  • 3 weeks later...
  • 1 month later...

I believe my R33 had a nismo 1 way, i cant remember to be honest.. Came with the car. Like anything, regular servicing is always a good idea.

Cold it wasnt bad. Mine had diff clunk when doing low-speed, low-load turns.. But it was only slight and before you knew it, you wouldnt even know its there.

Sorry for the necro, just thought this was relevant.. Plus interested in what the OP decided to go with, and how it performed :)

nismo dont do 1 ways for RWD diffs. its probably a 1.5 way

I now vote "helical" to anybody's question of "what diff should I get?"

Unless they're a drifter.

More info please, I'm verging on getting a 1.5 NISMO but so far no luck in finding one for a r33 GTR diff.

The Kaaz are helical cut are they not?

To many choices.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...