Jump to content
SAU Community

Recommended Posts

The last of my fruity bits from the stagea are listed below; prices do not include post.

Parts are located in regional SA, can deliver to Adelaide for free and can post interstate at buyers expense.

Mike

Garage Impul reclinable Recaro bucket seats with rails. Mint. $1000

Price is firm, that's 500 per side including rails - you can barely get a worn out grubby bride for that and these are genuine optioned Recaros by Impul.

IMG_0068.jpg

Cusco adjustable rear camber arms $250

100_1533.jpg

Cusco adjustable rear toe arms $200

100_1532.jpg

Cusco adjustable front camber arms sprayed 'stealth black' $350

partsround2.jpg

100_1544.jpg

Modified series 2 headlights. $450

CCFL rings, projectors, LED, HID etc (check HERE for more details)

yamazaki0930-img600x450-1297492683hcbfks53632-1.jpg

100_1620.jpg

Couple of sets of series 2 tail lights $250 per set

100_1570.jpg

Carbon fibre look interior trim to suit series 2. 4 pieces. $150

100_1514.jpg

Tanabe trans tunnel brace. $200

Bolts between chassis rails beneath transmission.

P5250107.jpg

Bolts up like this:

bracepic.jpg

Chrome sil panel covers, grey plastic trim. $100

The chrome bits can be pulled off and re-glued to your existing trim if wanted. Average condition.

100_1519.jpg

damn those seats have the same fabric insert as my seats and trims ......hmmmmmmm tempting.

still got the rear cusco arms?

Hi im interested in the sil trims! Do you know a rough price on delivery to Melb? p/c 3166 ( if it helps) Also how do u go about payment?

Cheers Ash

nice 'LESS THAN10' post dickhead... find another set anywhere round the place... if u do... compare condition... these seats are as cuddely as gtrs but as nice to sit in as any luxury car...

pm if ur gna shoot prices... oh and if u wernt aware mikes now living a few hundred ks out of adelaide.. maybe this is a delievery fee increse?

piss of to ur s13

gday

just wondering why the seats are on sale on the silvia forum for $800?

Exactly the kind of thing id expect from people lurking around that place...

I think your questions been answered buddy

Are you even interested in the seats or you one of "those people"?

Are you saying they aren't worth the coin?

What was the purpose of your post?

P.S. M I K E I am currently trying to raise the spondoola for your lights, might take me a bit - hope I'm not too late when I get it together!

Edited by SatchiThaStagea

gday

just wondering why the seats are on sale on the silvia forum for $800?

just sayin... wondering why the price has gone up since october.

http://www.nissansil...howtopic=463001

Cut & pasted from the sales guidelines.:thumbsup:

2. No price debates - put simply if you do not agree with the price being asked, do not comment on the thread. If you believe the seller is asking too much then either pm the thread starter or dont buy the items advertised - simple.

There is to be no "My cousin can get it for much less" or "Your asking too much" comments

+1 for daleo's post. if your goin to sign up to a forum at least read the rules!!

hey Mike, do those impul seats give you a lower seating position than the stock stag seats??

Thanks guys, but it doesn't bother me that he can google the seats etc - if I didn't want that information to be available then it would take 2 seconds to remove. Seats on nissansilvia are mine and yes, they were advertised originally (there and here) for less; as many know I was trying to raise the money to import another car at the time which didn't eventuate, and I'm no longer in a position where I want to give them away/rip myself off. I am more than happy to keep them.

As per initial post, if you want the seats: 'Price is firm, that's 500 per side including rails - you can barely get a worn out grubby bride for that and these are genuine optioned Recaros by Impul.'

Sachithestagea: No worries bud, if you want to check them out in person before hand you'll have to let me know in advance so I can bring them down to Adelaide with me.

Raysboostin: Yep, the seats drop you quite a way from the standard 'bench' seats. I guess it would be comparable to r32 gt-r seats in stagea, or thereabouts?

And Adam is correct, I'm now situated 400k's from Adelaide on a shift roster so please be patient - I'll get to replying to pm's etc when I can

:)

Hey dude,

just wondering where abouts you got the headlights done... drop me a pm when you get this

Much appreciated

if you pm him your details inc name adress number and maybe even look on the northine freight website and see where it your nearest depot. im sure mike will me happy to sort sumthing out.

mike ive used these guys b4, more than welcome to get em to pick em up from mine if needed :)

i did a gearbox for about 200 from vic i think it was... not as big but its fairly heavy...just so u can get an idea i spose

Raysboostin: Yep, the seats drop you quite a way from the standard 'bench' seats. I guess it would be comparable to r32 gt-r seats in stagea, or thereabouts?

roughly how much would say?? 1-2 inches??

Hey,

Still very interested in the sill trims. Might have been overlooked due to the silvia guys dissagreement.

Wondering if they are still available. :)

BLU SKY: apologies mate, I did overlook it. the trims look to be sold to another member pending post cost, but I'll get a price to your post code also in case it falls through.

Raysboostin: I can't give you an exact measurement as I don't have my stagea up here with me - this is the best I can do at the moment, hope it's of some help. measurements are shown from the centre of the mount holes, and the last from the base cushion.

seat1.jpg

seat2.jpg

seat3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...