Jump to content
SAU Community

Recommended Posts

Hey fellas,

I drove past an Evo with Semi slick Good year racing tyres on. I would have thought these are illegal for Street use. Can someone please confirm if this is the case as I wouldn't mind a pair myself. Looks really nice and adds safety.

Cheers.

Tire%20GoodYear%20NASCAR%20Slick%20and%20Rim.jpg

semi slicks are certainly legal...but they are not a simple choice

they wear out 5-10x quicker than a normal tyre

they are very noisey

they tramline (follow the road surface) like crazy

they are harsh

they are bad to terrible in the wet (depends on brand and amount of tread)

they have noticeably less grip when cold.

they are expensive

on the + side, they are excellent fun once warm

"semi-slicks" is really a made up class of tyre. in reality there are 2 types of tyre. street legal and not street legal. if the tyre is DOT or E marked then it's a very good bet it's legal for road use in australia. some so called semi-slicks are not but 90% of them are. full slicks are not legal simply because they are designed for race use only so the manufacturers never bother to get them tested to DOT standards.

duncan outlined the facts pretty well. despite them being legal they are not neccissarily the best choice for a road car, particularly if you do a lot of kms. I've used semis as road tyres on many of my cars but they were driven at most once a week. on cars you drive a lot there are better options out. if you want to do a lot of road kms but still do the odd track day I'd get something like advan AD08s or dunlop Z1 star specs. great street tyres and still good on track.

many new sportscars are coming out standard with tyres that have semi slick style tread, but the big difference is in the rubber compound, so while it may look like a semi slick its actually very much so a street tyre made with the track in mind, think yokohama ad07/8, kumho ku36, bridgestone re11 or nitto nt05 etc as Richard said these are the best option for a daily driven car and are much safer in day to day conditions,( I like to call these "street semi's" to make life easier when comparing to true semi slicks such as Toyo R888, Bridgestone Re55s, yokohama a050).

dont forget semi slicks usually have less tread depth, in NSW you need at least 1.5mm else its a defect, semi slicks will reach this much quicker due to low depth to begin with and fast wear, even though they may still have life left as a track tyre, on the street they will be a defect.

  • Like 1

From personal experience you will tire (pun not originally intended but I'll take it anyway) of track semis on the road very quickly. It's like having the NVH turned up to 11. I've driven a few klms on semis on the street and I'm always desparate to get my other set of rims on after a week or so. There are not that many opportunities to use their performance on the road either (though I did have a stunning drive down the GOR on a set once) so the upside is small and the downside is large. Just go a performance street tyre as all others have said.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...