Jump to content
SAU Community

Recommended Posts

guys im looking at this car nissan r34 1998 gt four

its bay side blue

IMACULATE can BUT it is four wheel drive so its about as gutless as my mitsi galant and i cant hack that

paying that much money i would want a rear wheel drive

i keep hearing people talk about taking out the 4wd fuse and it will defuse the front wheels

i keep hearing this about gtR's but will this work on a gt

need help please

Link to comment
https://www.sau.com.au/forums/topic/364219-4wd-fuse-help-asap/
Share on other sites

Tha buy a rwd one. Taking out the drive shafts will save you a few kgs at best. So you be still 100kg heavier than a rwd one but without the grip of the 4wd

It needs a turbo. That's the issue it has...

These two points are the most relevant here

I'm assuming your on P plates which is why your buying an NA?

do the smart thing and build a turbo engine on the side while you have your P's. 2WD or 4WD, there both not exactally quick in NA form. But if you've got the 4WD system, putting a turbo on it will give you great grip and make it alot quicker

Edited by 89CAL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...