Jump to content
SAU Community

Sump Is Hitting Sway Bar

R32Abuser
 Share

Recommended Posts

R32Abuser Mentor

R32Abuser

Posted
Posted

Hi all,

Before the standard "Use the search function" response will be used - I have searched and there is very little regarding this issue using a OEM routed swaybar.

This topic is regarding installing an RB30DET into a R32 GTST.

Currently, my sump (High Energy style) is clashing with my sway bar. My engine mounts have been modified as per the PDF (potentially slightly lower engine position) but this has led to the sump hitting the Whiteline sway bar (SK group buy spec).

My question is what have people done to get around this issue?

On initial glance, my solution would be to space the sway bar down at the chassis mounts. Use a longer bolt and washer. The only issue I can see is that the link pins/drop links will no longer be long enough. However, this is easily overcome by either modifying the standard links or purchasing aftermarket ones.

The only practical downside I can see from that is the sway bar may end up lower than the cross member which in the vent of bottoming the car out, the sway bar will scrape/bend. So long as the link pins are actuating the sway bar perpendicular to the lever arm on the sway bar, kinematically I see no change.

Any other ideas/options?

All input appreciated.

Cheers,

David

Link to comment
https://www.sau.com.au/forums/topic/366496-sump-is-hitting-sway-bar/
Share on other sites
GTScotT Grand Master

GTScotT

Posted
Posted

Whiteline sell an S-link kit for the sway bar which would give you some adjustment i believe.

Thing is, I dont think the amount you will need to space it will alter much at all. A 10mm drop would do SFA to the spherical ball joints on the links.

Just how far out is it do you think?

R32Abuser Mentor

R32Abuser

Posted
  • Author
Posted

Well realistically speaking, the engine mounts have been modified as per the RB30DET PDF, so in saying that it should be clashing at a MAXIMUM of about 10-15mm.

Car is at my engine builders as he is installing it, so dont have the car on hand to measure/take pictures.

Just wondering if there are any other ideas other than the above mentioned fixes?

GTScotT Grand Master

GTScotT

Posted
Posted

Heat up the sump and modify it with a hammer (does it have gates and baffles inside? Modify them first).

This has got to be the dumbest idea I have ever heard...

Mate this is not a personal attack, and I generally respect your posts as a whole... But this is WRONG.

DO NOT play games with the motors life blood, RB's are plaigued with oil problems as it is. Why create another?

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

This has got to be the dumbest idea I have ever heard...

Mate this is not a personal attack, and I generally respect your posts as a whole... But this is WRONG.

DO NOT play games with the motors life blood, RB's are plaigued with oil problems as it is. Why create another?

Your criticism is welcome! I actually meant it quite literally at the time - easy fix to modify tin sump to accommodate a few mm but I guess it needed a little more thought...
works 510 Experienced

works 510

Posted
Posted

I had the same problem in my cefiro.

It just slightly touches.

those whiteline S/ 8 looking links are rubbish, imho.

My car is street/ drift and like all of my cars, usually set up with soft susp and big sway bars.

I thought I'd try a heavier setup with no front swaybar for a change,

If its rubbish, custom swaybar is the go.

I tried spacing the stocker down, but wasnt happy with the results I got.

If it was a stock sump I would just notch / ive the sump a small releif.

R32Abuser Mentor

R32Abuser

Posted
  • Author
Posted

Yeh...problem is that I dont want to have to get another sway-bar since I have already paid for this upgraded one. Sure I could sell it, but its just another hassle I don't want to have to deal with.

I think spacing the sway bar down will be the way to go. If necessary I will get those whiteline S Links. My standard links need replacing anyway.

If I still have problems, guess the way forward will be to modify the sump, or get a new swaybar...neither of which I will like doing.

  • 4 weeks later...
bubba Grand Master

bubba

Posted
Posted

Finally dropped the 30 back in the car last night and with the engine mounts bolted with stock holes there is about 10mm clearance between the swaybar and ASR sump, will throw a couple of shitty pics up later.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Dose Pipe Sutututu
      Another little story of weird shit happening

      By Dose Pipe Sutututu · Posted

      Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • MBS206
      R34 gtt rb25det neo timing belt kit

      By MBS206 · Posted

      It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Dose Pipe Sutututu
      Another little story of weird shit happening

      By Dose Pipe Sutututu · Posted

      Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...