Jump to content
SAU Community

Recommended Posts



www.durafix.com

Discuss!


p.s. I barely got half way through the vid and I skipped ahead to eBay and bought a pack of 20!

p.p.s. if anyone is concerned about strength, there's another video when a guy has welded 10mm plates of ally together at right angles, smacks one side with a hammer and the ally begins to bend before the weld fails!

p.p.p.s. http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=270768970566&ssPageName=STRK:MEWNX:IT#ht_3105wt_1139
Link to comment
https://www.sau.com.au/forums/topic/368666-durafix-easy-weld/
Share on other sites

Looks handy to have around, but its around $50 for 40 rods and you need an oxy.

i'd love to try it for rim repairs though

See that eBay link? $11 US for approx 10 rods... Looks like one does a fair bit too...

You don't need an oxy set-up, just a butane torch...

Pretty fkn awsome if it holds up as well as it looks...

Ha ha... I wanna see someone 'solder' up a cooler pipe work set up-

I've bought some for the sole purpose to re-doing my intercooler piping and making an airbox, so I'll update in this thread how I go!

Edited by StealthX

this stuff has been around for yrs i saw a display at a car show over 20 yrs ago i was pretty impressed then . ive never used it but i can see it would be handy to have a few rods in the workshop.

  • 3 months later...

I used this stuff to make up an intake for my car. Turned out OK, considering I have no experience with welding etc.

I used a LPG gas bottle from my bar-b-q, with an appropiate nozzle, to heat up the material. One thing to remember, if you are making something with a few separate parts (like I did), when you heat it up again to stick the new bit on, there's a big chance the original "weld" will start to run. To help with this problem I bought a block of modelling clay and pushed some around the first bit/s to act like a heat sink.

post-76144-0-30043900-1318242557_thumb.jpg

  • 2 weeks later...

anyone know if they have something similar for steel?

i've got a stick welder and we're trying to modify a pocket bike exhaust onto a motorised push bike (using the band expander)

the cheap chinese steel is so thin that its got a few holes in it

just want something solder like that will work like this does

  • 2 weeks later...

They usually have a stand at farm machinery days and will weld up any alloy part you bring in to get done. They are very good at it and make it look very easy. I've tried it in different things and it works OK, but I found that using the normal commercially available alloy brazing flux and 10% mag rods is about the same. This was using a Dillon/Henrob oxy.

anyone know if they have something similar for steel?

i've got a stick welder and we're trying to modify a pocket bike exhaust onto a motorised push bike (using the band expander)

the cheap chinese steel is so thin that its got a few holes in it

just want something solder like that will work like this does

Chinese metal for things like your talking about is usually terrible stuff to play with. Its usually recycled tseel with inclusions all through it. And then you say it is an exhaust pipe or some such - double whammy. Nothing like exhaust pipe for dirt and crap in the metal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...