Jump to content
SAU Community

Recommended Posts



www.durafix.com

Discuss!


p.s. I barely got half way through the vid and I skipped ahead to eBay and bought a pack of 20!

p.p.s. if anyone is concerned about strength, there's another video when a guy has welded 10mm plates of ally together at right angles, smacks one side with a hammer and the ally begins to bend before the weld fails!

p.p.p.s. http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=270768970566&ssPageName=STRK:MEWNX:IT#ht_3105wt_1139
Link to comment
https://www.sau.com.au/forums/topic/368666-durafix-easy-weld/
Share on other sites

Looks handy to have around, but its around $50 for 40 rods and you need an oxy.

i'd love to try it for rim repairs though

See that eBay link? $11 US for approx 10 rods... Looks like one does a fair bit too...

You don't need an oxy set-up, just a butane torch...

Pretty fkn awsome if it holds up as well as it looks...

Ha ha... I wanna see someone 'solder' up a cooler pipe work set up-

I've bought some for the sole purpose to re-doing my intercooler piping and making an airbox, so I'll update in this thread how I go!

Edited by StealthX

this stuff has been around for yrs i saw a display at a car show over 20 yrs ago i was pretty impressed then . ive never used it but i can see it would be handy to have a few rods in the workshop.

  • 3 months later...

I used this stuff to make up an intake for my car. Turned out OK, considering I have no experience with welding etc.

I used a LPG gas bottle from my bar-b-q, with an appropiate nozzle, to heat up the material. One thing to remember, if you are making something with a few separate parts (like I did), when you heat it up again to stick the new bit on, there's a big chance the original "weld" will start to run. To help with this problem I bought a block of modelling clay and pushed some around the first bit/s to act like a heat sink.

post-76144-0-30043900-1318242557_thumb.jpg

  • 2 weeks later...

anyone know if they have something similar for steel?

i've got a stick welder and we're trying to modify a pocket bike exhaust onto a motorised push bike (using the band expander)

the cheap chinese steel is so thin that its got a few holes in it

just want something solder like that will work like this does

  • 2 weeks later...

They usually have a stand at farm machinery days and will weld up any alloy part you bring in to get done. They are very good at it and make it look very easy. I've tried it in different things and it works OK, but I found that using the normal commercially available alloy brazing flux and 10% mag rods is about the same. This was using a Dillon/Henrob oxy.

anyone know if they have something similar for steel?

i've got a stick welder and we're trying to modify a pocket bike exhaust onto a motorised push bike (using the band expander)

the cheap chinese steel is so thin that its got a few holes in it

just want something solder like that will work like this does

Chinese metal for things like your talking about is usually terrible stuff to play with. Its usually recycled tseel with inclusions all through it. And then you say it is an exhaust pipe or some such - double whammy. Nothing like exhaust pipe for dirt and crap in the metal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was just driving into work and while on my drive, I went to accelerate and noticed the car would sputter/hesitate and I’d hear a few pops from the exhaust before it started going faster. Then I also noticed that when I push my clutch in, the car would die. This all started happening today. Any ideas?
    • That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
×
×
  • Create New...