Jump to content
SAU Community

Recommended Posts

HI Everyone. I've been a well known genuine user on SAU for quite a few years.

Unfortunately some f**king tosser didn't give way, and me, going straight through a green light, plowed into them.

So, my much loved R33 is dead. Well, almost.

I'm parting it all out, and to make this easy, I will tell you what isnt available. Assume everything else is.

Parts NOT available:

1. Engine - Sold

2. Gearbox, Master and Slave cylinders, clutch Pedal - I'm keeping

3. Suspension - I'm keeping

4. Exhaust and intake pipes - I'm keeping

5. Shifter - I'm keeping

6. Windscreen - Smashed

7. Front Bar - Smashed

8. Right Fender - Smashed

9. Bonnet - Smashed

10. Right Headlight and other right lights - Smashed

11. Right control arm, and this bits - Bent

12. Not sure if selling the PowerFC and hand Controller yet

Parts Available:

All Interior - and that means absolutely everything. Just note the airbags went off - SO Steering wheel and passenger section damaged

Engine parts

Excedy Twin Plate Heavy duty clutch and lighter excedy flywheel kit (Still about 80% good)

Both doors

Sideskirts

Windows

Brakes

Left Fender

Boot Lid

Series II rear spoiler

Skyline Center Section lights up an aqua colour (pics attached)

Tail lights

Rear bumper

Diff

Axles

Rear wheels and tyres

Rear windscreen

Quarter Glass

Insides of the boot

Side Mirrors

Extra Green Passenger Mirror

Anything else that isn't damaged.

I will be updating this as much as I can and often so keep an eye on this thread.

You're welcome to PM me anything.

my number (written backwards to stop spam) 7046339340

my email paceys[at}gmail.com (change [at} to @)

Thanks guys

Jono

pics:

car.jpg

crash.jpg

back.jpg

GOD DAMN, what a shame because of some one stupid action!!.... ill leave it there, or ill go on a 72 page rant!..

hey, were are you, qld?, would love some silver parts :) . sorry for the lose, loox like you had worked hard on this

Gutted for you man, that's terrible. Sorry for your loss.

Will keep in mind for parts I may need since I'm just starting a skyline journey and I'll pass on for others too.

All the best selling the parts...

Thanks for all of the kind words everyone.

The brand new RB25\30 motor and fully reconned gearbox had only done 1,500 kms when I had the accident...

Its a f**king let down, thats for sure.

I'm after ALL the rubber bungs and bump stops from the boot, and also the boot cover on the inside of the boot itself. (carpet liner?)

The bottom boot carpet too.

If the rubber bonnet stops are still on the radiator support, both of those too.

Price including shipping to 2087 pls.

Thanks!

-Steve

were you drunk when you posted that?

Ahh shit stick, my phone and its auto correct. I was asking what kind of rotors do you have there. I can't see what I'm typing until I submit the post.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...